Radwag MAS.1.51 Weighing Module

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Beckman Coulter Biomek NXp Laboratory Automation Workstation Spares/Repairs This was removed from a  (more)university lab where it was surplus to requirements. The unit is sold for spares/repairs. It is not in running order.

This Surgipath 04501GFS-240 Premier Dispensing Console was removed from a university lab where it wa (more)s surplus to requirements. The item powers on and is in a reasonably used cosmetic condition. All compartments successfully heat independently as displayed on the screen, unable to test further at our facility.

PacBio Sequel II Sequencing System Lab This unit is being sold on behalf of an operational universit (more)y laboratory. The system is in good cosmetic condition and full working order, it received a Maintenance check by PacBio on:13/04/2023. The full Maintenance report is available on request. The unit can be collected from the client in New York, but we may be able to discuss logistics around domestic US delivery at the point of sale. Also included are digital copies of the following: - Installation Summary - 3/3/2020 - Preventative Maintenance Summary - 10/5/2021 The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta Select-Horn electronic muffle furnace has an interior enclosure made up of high-quality refractory plates and evenly distributed heating elements with special long-lasting high-melting point wire. Excellent thermal insulation and reduced consumption. Quick temperature recovery when opening and closing the hinged door.

HACH COD REACTOR 16500 dry block. Operating temperature 105°C (±15°) to 150°C (±2°) to 155°C (±5°)C. (more) 150°C, ±2°C. Temperature indicator via built-in thermometer ± 5°C. Response and warm-up time 30-40 minutes. Capacity for 16 culture vials of 15 × 100 mm. Dimensions 165x102x247 mm. 3.4kg. User manual The HACH COD REACTOR 16500 dry block is equipment designed to perform laboratory tests. With its rapid heating capability and precise temperature control, this dry block ensures reliable and reproducible results. In addition, its compact and easy-to-use design makes it an ideal tool for laboratories of different sizes.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX terminal. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Ohaus PX124 Pioneer Analytical BalanceThe OhausPX124 Pioneer PX Analytical Balance combines essentia (more)l weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX124 weighing plate has a maximum capacity of 120 gramswith a readability of 0.001 grams and a weight stabilization time of 3 seconds.The PX124 is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication. 120 gram weight capacity Readability (grams): 0.0001 Pan size (diameter): 4.72 inches Stabilization Time: 3 seconds Internal Calibration Model The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use The PX features a second line display for additional information or guidance Static removal bar for convenient grounding USB and RS-232 connectivity for easy communication Click Here to View Product Video INCLUDED: The Ohaus PX124 Pioneer Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson Pipetman Neo 12x200 Multichannel PipetteFeatures - Redesigned tip ejector and ejection spring (more)s reduces tip ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. INCLUDED: The Gilson Pipetman Neo 12x200 Multichannel Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo 12x200 Multichannel Pipette Specifications Model12x200 Cat # F14404Volume (ul)20100200Max. Permissible Systemic Error (ul)± 0.50± 1.00± 2.00Max. Permissible Random Error (ul)≤ 0.25≤ 0.40≤ 0.60Comparison of ModelsSpecificationsGilson Pipetman Neo 8x20Gilson Pipetman Neo 12x20Gilson Pipetman Neo P8x200Gilson Pipetman Neo 12x200Volume (ul) 22202010101001002020200200Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.50± 0.50± 0.20± 0.20± 1.00± 1.00± 0.40± 0.40± 2.00± 2.00Max. Permissible Random Error (ul) ≤ 0.08≤ 0.08≤ 0.25≤ 0.25≤ 0.10≤ 0.10≤ 0.40≤ 0.40≤ 0.20≤ 0.20≤ 0.60≤ 0.60.comparison-table tr td:nth-child(5) { background-color: #fffacd; }