Bio-Rad Experion Electrophoresis Station + Vortex Station II + Priming Station

MiniVertigel 2 APELEX for 2 gels 0.8mm 10 x 10cm New equipment in its original packaging Reference:  (more)400000 Comes complete with casting base Useful dimensions of gels 9 x 8.5 cm (L x H) Glass plates 10 cm x 8-10 cm Height Volume of acrylamide for 2 gels 15 ml Constant current 15 to 30 mA per gel Voltage from 150 to 300 Volts Migration time: 30 to 60 minutes

Bio-Rad Phd System laboratory analyzer for parts BIORAD PHD Without a computer For pieces

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Ccell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 180 x 405 x 94 mm Gel tray sizes (OD) (WxL): 100 x 150 mm, 150 x 150 mm ReadyAgarose gels accommodated: No Sample throughput: 1 – 120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~30 mm/hr (at 75 V) This electrophoresis power supply is recommended for basic applications such as submerged horizontal and mini vertical gel electrophoresis. It offers timer control and constant-voltage or constant-current output. Output range (programmable): 10 – 300 V, fully adjustable in 1 V steps 4 – 400 mA, fully adjustable in 1 mA steps 75 W (maximum) Type of output: Constant voltage or constant current with automatic crossover Output terminals: 4 pair recessed banana jacks in parallel Timer: 1 min – 99 hr 59 min, fully adjustable Pause/resume function: Yes Safety features: No-load detection, sudden load change detection, overload/short-circuit detection, overvoltage protection Input protection: Fuse on both hot and neutral Dimensions (WxLxH): 210 x 245 x 65 mm Weight: 1.1 kg

Bio-Rad offers a range of mini horizontal electrophoresis chambers to resolve DNA fragments on eithe (more)r handcast agarose gels or ReadyAgarose precast gels. These cells include a buffer tank, safety lid with cables, and leveling bubble. Fast and flexible, the Mini-Sub cell GT cell is our most popular classroom gel box. The Mini-Sub cell GT cell holds either a 7 x 7 cm or a 7 x 10 cm gel tray. A 10 cm agarose gel poured with two 8-well combs easily accommodates two student teams at a time. At 100 V, this cell resolves DNA fragments from 20–20,000 base pairs in just under 30 min. Gel tray sizes (OD) (WxL): 70 x 70 mm ReadyAgarose gels accommodated: Yes, mini format Sample throughput: 8–30 Base buffer volume: ~270 ml Buffer recirculation: No Bromophenol blue migration: 4.5 cm/hr (at 75 V) Dimensions (WxLxH): 120 x 260 x 65 mm Weight: 1 kg

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Life Technologies Floid Cell Imaging Station This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but is stuck in a boot loop. It is in good cosmetic condition with marks from use. It is sold for spares/repairs With it are; 1x Floid Rescue Disk Memory Stick 1x Evo Floid Recovery Memory Stick 1x GlobTek 9 volt Power SupplyM/N: GT-81081-6012-T3

This CTC Analytics Leap HTC PAL Autosampler Heating and Cooling HPLC was removed from a university l (more)ab where it was surplus to requirements. All units are in good cosmetic condition and powered up. The CTC Analytics Leap HTC PAL Autosampler was tested with a digital thermometer (not included). We are unable to test further at our facility. Autosampler consists of: CTC Analytics main unit MXY 01-01BSerial No. 113351 CTC Analytics Injector Column MZ01-00DSerial No. 1284 2 x CTC Analytics Pumps MZ01-00DSerial Nos. 3022, 3216 Supercool Box27 sample tray heating and cooling 3 x drawers 20cm x 12cmSerial No. CCO-00103 CCT Analytics Peltier Thermostat unit MN 03-02 CCT Analytics Power Supply MN01-00 CCT Control Pad and Screen MB 01-00A Needle wash unit Included:4 x power leads1 x data cableSolvent shelf with 1 litre glass Scott Duran bottle

Immunetics MiniBlotter 16. 2x16 channels. Max reagent volume per channel: 350μL. Channel width x len (more)gth: 3.0 mm x 5.5 cm. Blots width 8.3 cm. For membrane assays including Western, Northern, and Southern Blots and Checker-board Blots. Requires microliter volumes, not milliliter volumes. Multiple samples analyzed simultaneously. No cross-contamination between channels. Decrease processing time. All results on a single membrane. Compatible with all standard electrophoresis systems. With the Immunetics MiniBlotter enable you to perform multiple antibody or probe incubations on a single membrane, using microliter volumes of reagent. Typical applications include monoclonal antibody screening on western blots, animal and human serum screening, and DNA probe hybridizations. Sample processing is streamlined through use of the Washing Manifold, which enables washing of all sample lanes simultaneously. Reactions can be detected by all conventional methods, including enzyme conjugates, chemiluminescence and radiolabels.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

one digital tester Manuf: Wandel & Goltermann Model: TKL-12 description: display: high > +0.7 U ... (more).......low < +0,3 Uimpulse limit:                           ca. 0.5 UVimpulse duration:                   > 1usec power supply:                         + 12 - 14 VDCinput                                           1 MegOhm, 25 pFinput cirrent                              15 uA a very versatile instrument to check and display logic states of CMOC or 12 V logic units quickly and effective up to 0.5 MHz Tester in is used  condition and 100 % functional tested - comes with case and manual