Bio-Rad Sub-Cell GT Electrophoresis System

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-36591 Hybaid Maxi 14 Rotisserie Hybridisation Oven ITEM-36595 Hybaid Shake 'n' Stack Hybridisation Oven [condition: Used]ITEM-36596 Fisherbrand HU10 Mini-Plus Horizontal Gel Electrophoresis Unit [condition: Used]ITEM-36597 Hoefer Electrophoresis Unit [condition: Used]ITEM-36598 Hoefer Electrophoresis Unit [condition: Used]ITEM-36599 Luckham 4RT Rocking Table [condition: Used]ITEM-36607 UVP Transilluminator [condition: Used]ITEM-36608 Compaq TFT7010 Monitor [condition: Used]ITEM-36609 Thermo Hybaid PCR Express With Spare PCR Block [condition: Used]ITEM-39835 Hanna Instruments Water Test ITEM-39836 Jenway 9200 DO2 Meter ITEM-39766 Extech 407510 Heavy Duty Dissolved Oxygen Meter ITEM-39767 Job lot of Hanna Instruments Pocket PH Meters ITEM-38983 FluidX Xcap Microplate capper [condition: Used]ITEM-23169 Small desk fan SFE/1 [condition: Used]ITEM-39770 Hybaid PCR Express ITEM-39771 MJ Research PTC-225 Thermal Cycler ITEM-39772 Grant W6 Sonic Bath ITEM-37438 CBS Scientific EPS-300 X Power supply [condition: Used]ITEM-37439 SS 3H Hotplate Stirrer [condition: Used]ITEM-39774 Spectra Physics SP8480XR Scanning Detector ITEM-39775 Tyco Electronics LVC2KW Power Supply ITEM-39776 GS Laboratories 6593-10 CO2 Control Backup System Lab ITEM-39777 Spectra System AS3000 ITEM-39778 Test Tubes w/ Holding Rack ITEM-39779 Perkin Elmer L226-0103 Model LC-240ITEM-39101 Vevor Rolling Mill [condition: Used]ITEM-37443 Jenway 1000 Hotplate Stirrer [condition: Used]ITEM-39782 Pyrex 20L FlaskITEM-39783 Zippette Flask and Dispenser

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.  Both pump speeds (High/Low) work correctly. Included are; TankModel: DGGE-2001Volts (DC/Hz): 250VDCMaximum Operating Limits: 250VDC/30W/70ºC Polyscience Model 71 Analog Immersion Recirculating Water Bath Heater PumpModel: 71Voltage: 240RangeHz/A: 50/4.30S/N: G15327Rev: B

Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Sizes (W (more) x H) 18 x 16 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical system ideal for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit is designed for longevity and ease of assembly, making it well-suited for consistent use in busy lab environments. The SE400 accommodates glass plates up to 18 x 16 cm, providing ample space for efficient protein analysis. With the addition of a divider plate, users can run two gels simultaneously, enhancing throughput and versatility. Equipped with a built-in leak-free casting stand, the SE400 streamlines the setup process, while its components—plates, clamps, spacers, and combs—are fully interchangeable with the SE600 Series, allowing labs to expand their setup with ease. Operating smoothly within standard lab conditions, it handles temperatures up to 45°C and humidity levels up to 80%, with power settings reaching 500 V, 60 mA, and 20 W, ensuring reliable performance for routine applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 16 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate-Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 16 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE660 Tall Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass (more) Plate Sizes (W x H) 18 x 24 cm, 18 x 16 cm or 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 24 cm - Produce straight lanes and sharp,well-defined bands - Run up to four gels (maximum 112 samples) at one time under identical conditions - Run gels at uniform temperature from 1 to 45°C - Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis - A wide array of accessories allows you to tailor gel configurations to your needs - Choose from a wide variety of accessories The Hoefer SE660 Tall Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit is a powerful and versatile system designed for labs seeking increased resolution through larger gel formats. This tall unit accommodates glass plates up to 18 x 24 cm, making it ideal for applications that require precise protein and nucleic acid separation. Equipped with dual cooling, the SE660 ensures sharp, well-defined bands across samples and allows for uniform temperature control ranging from 1 to 45°C, making it suitable for both denaturing and native polyacrylamide gels as well as 2-D electrophoresis. Designed to streamline workflows, the SE660 can run up to four gels simultaneously, with a capacity for as many as 112 samples under identical conditions. This unit's adaptable design and wide selection of accessories enable labs to tailor gel configurations based on specific research needs. Operating smoothly in standard lab environments, it handles temperatures up to 45°C and humidity levels up to 80%, with power settings reaching up to 1000 V and 500 mA, ensuring robust performance across diverse experimental setups. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 24 cm, 6 pcs - Clamp Assemblies, 8 cm, 4 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate-Alignment Template - Wonder Wedge™-Plate Separation Tool - Gel Seal - Combs, 15-well, 1.5 mm thick, 2 pcs - Spacers, 1.5 mm thick (2 cm wide), 4 pcs - Lower Buffer Chamber INCLUDED: The Hoefer SE660 Tall Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Clamp Assemblies, 8 cm, 4 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Buffer Dam - Spacer-Mate-Alignment Template - Wonder Wedge™-Plate Separation Tool - Gel Seal - Lower Buffer Chamber - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE600 Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plat (more)e Sizes (W x H) 18 x 16 cm or 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Produce straight lanes and sharp, well defined bands - Run up to four gels (maximum 112 samples) at one time under identical conditions - Run gels at uniform temperature from 1 to 45°C - Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis - A wide array of accessories allows you to tailor gel configurations to your needs The Hoefer SE600 Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit is an efficient, high-capacity system designed for versatile protein and nucleic acid analysis. This unit accommodates glass plates up to 18 x 16 cm, making it ideal for applications requiring precise and consistent separation. With dual cooling capabilities, the SE600 maintains uniform temperatures from 1 to 45°C, ensuring sharp, well-defined bands across all samples. Its adaptable design supports both denaturing and native polyacrylamide gels, as well as 2-D electrophoresis, offering flexibility for diverse lab requirements. Capable of running up to four gels simultaneously with a capacity for up to 112 samples, the SE600 is suited for high-throughput environments that demand reliable performance. Its range of compatible accessories allows labs to customize gel configurations based on specific needs, and its straightforward design simplifies assembly and operation. Operating effectively within standard lab conditions, it handles temperatures up to 45°C and humidity levels up to 80%, while power settings reaching 1000 V and 500 mA ensure robust performance across experimental setups. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm, 6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Combs, 15-well, 1.5 mm thick, 2 pcs - Spacers, 1.5 mm thick, 2 cm wide, 4 pcs INCLUDED: The Hoefer SE600 Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm, 6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Biorad MINI-SUB CELL GT electrophoresis cuvette. Includes cover and power cables, 1 gel tray, 1 limi (more)ter for the formation of gels and 2 combs of 8 and 15 wells, respectively. User manual. Specifications:

The biohazard cabinet of Clean Air type EF/A4 is designed for microbiological research with biologic (more)al agents, such as bacteria, viruses and allergens. Thus, this biohazard cabinet is suitable, inter alia, for culturing cells and for transfecting cells under sterile conditions. The Clean Air EF/A4 generates a sterile air flow in the cabinet, keeping the material of the cabinet free from contamination and contamination (product protection). In addition, the downflow provides reasonable protection against cross-contamination of experiments. Furthermore, the intake of air from the laboratory room ensures that an inwardly directed protective air curtain is formed at the front of the cabinet, which serves as a personal protection. Downflow HEPA filter (EN 1822): 12P6 + Exhaust HEPA filter (EN 1822): 4P4 UV wave length: 253 nm Dimensions prefilter: 445 x 1150 mm Interior dimensions (WxDxH): 1200 x 575 x 750 mm Dimensions (WxDxH): 1330 x 835 x 1550 mm Frame height: 750 mm Weight: 200 kg

Leitz Wetzlar Dialux 20 Microscope This was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition, with all mechanical elements in working order. Includes the following. 1x Leitz Lamp Power SupplyObjectives: 1x Leitz Wetzlar P 10/0.25 170/- 1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2 1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. Optionally, the balance can be equipped with 4 IN and 4 OUT. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Corepoint Scientific EF051WWW-0M -15C to -25C Hazardous Location Freezer Temperature Setpoint Range  (more)-15°C to -25°C Capacity 4 Cu. Ft. Defrost Method Manual Features - Offers 4 cubic feet of storage capacity, ideal for undercounter installation in space-constrained environments. - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D, ensuring safe operation in environments with potential explosive conditions. - Features a microprocessor temperature controller with a digital temperature display, allowing precise control over temperatures ranging from -15°C to -25°C. - Utilizes R600a, a natural hydrocarbon refrigerant, enhancing energy efficiency and reducing environmental impact. - Built with high-density urethane foam insulation and finished with white powder-coated steel for durability and compliance with EPA standards. - Equipped with a solid swing door and keyed door lock to secure sensitive materials effectively. The Corepoint Scientific EF051WWW-0M Hazardous Location Freezer offers a compact and efficient solution for safely storing sensitive materials in environments that require stringent adherence to safety standards. With a storage capacity of 4 cu. ft., this freezer is ideal for small laboratories or areas where space is at a premium. It features a robust construction with a white powder-coated steel exterior and a cabinet that is foamed-in-place with EPA compliant high-density urethane foam, enhancing its insulation and energy efficiency.This unit is equipped with a single swing solid door that includes a keyed door lock for secure access. Two fixed shelves inside the freezer help optimize storage space and organization. The leveling legs allow for stable installation on uneven surfaces, ensuring that the unit operates correctly.Temperature management is controlled by a microprocessor temperature controller with a digital display, allowing for precise settings from -15°C to -25°C. The freezer also includes manual defrost capabilities, essential for maintaining peak performance and efficiency. Safety features include audible and visual high and low temperature alarms, along with remote alarm contacts, which provide added security and compliance with safety protocols in hazardous locations. Power cord is not included - final power connections at site must be hardwired to meet local codes. INCLUDED: The Corepoint Scientific EF051WWW-0M -15C to -25C Hazardous Location Freezer includes: - 2 Fixed Shelves - Leveling Legs - Key for Door Lock - Operator's Manual - 2 Year Manufacturer's Warranty