JEOL JEM-100CX II Electron Microscope Vacuum Pump

Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT It is in good cosmetic condition and powers on, w (more)e are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

Integrated Technologies G-Sealer Variable Temperature Sealer S120499-1-A002 This was removed from a  (more)university lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is  (more)surplus to requirements. The lab informed us that it was working when last used. The microscope is from 1998, has one SE2 Detector. Included are the following; Hitachi S3000H SEM Scanning Electron Microscope LabModel: S-3000HDate: 9/8/12Part#: 50E-G386Serial#: 1014-30 System specifications- 0.3 - 30kV acceleration voltage range- 5 nm resolution at 25kV in variable pressure mode- 150mm diameter maximum specimen size- Dual-bias for low voltage signal noise- Backscatter mode Canatron Transformers EN 60742 Transformer Model: EN 60742Serial#: CT6699 Hitachi CM751ET MonitorModel: CM751ETSerial#: G8E008620 Hitachi CM751ET MonitorModel: CM751ETSerial#: T9A 012253 Hitachi S3000H SEM Control PanelSerial#: 1014-30 Edwards Oil Mist Filter EMF20Serial#: A 462 29 000 Hitachi Measure Function Setup Disk V 01-05Serial#: 50E-5497 Hitachi SEM Data Manager Setup Disk V 01-05Serial#: 50E-5502 Hitachi S-3000Series V 10-16 CD Disc 1 & 2Serial#: 50E-8108 Hitachi PC-SEM Restore CD Disc 1 & 2Serial#: 1014-30 Adaptec SCSI Select v2.57.4 Floppy DiskSerial#: 1492920-00 Adaptec AVA-2915LP/2930LP v1.13 Floppy DiskSerial#: 1495022-00JA HP Operating System DVDSerial#: 483886-B21 Contec Drivers Software COM Setup Disk v.1.8Serial# LYBM994 HP Compaq Business PC Documentation and Diagnostics DVDSerial#: 490849-B21 HP Operating System DVDSerial#: 394378-002 HP Operating System DVDSerial# 486467-B22 HP Restore Plus! DVD Serial#: 481206-B25 Roxio Creator Business 10 DVD Serial#: 498164-B21 S300H Printed Circuit Board Model S-3000H SEM Instruction Manual Serial#: 50E-9247-9 Hitachi S-Type FilamentsDate: 08.06.201Lot#: 0490228080Serial#: 777-0179

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

The PS.X7 series represents a new advanced level for precision balances. The X7 series balances feat (more)ure the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X7 series balances In new PS.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Polyscience LM61GX1A110C LM6 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Optimized for performance at low temperatures Ideal for benchtop rotary evaporators Large, easy to read LED display Space-saving design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience LM61GX1A110C LM6 Benchtop Chiller , -10°C to 30°C, 560W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MultiDrive basic Motor Type Brushless DC Speed Range 3000 - 20000 rpm Power Input 1000W Feature (more)s - The IKA MultiDrive basic offers versatile crushing capabilities for various sample types, with options for mixing or grinding. - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a 1000 Watt output. - Interval programming simplifies coarse crushing or thorough blending tasks. - Integrated cooling system ensures separate cooling for the sample and coolant. - Includes a variety of vessels for different grinding tasks (vessels not included). - USB interface allows for easy actuation and documentation, replacing the M 20 mill in combination with the MI 250 milling chamber. Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available (vessels not included in delivery). With the MultiDrive basic it is possible to mix or grind. There is a USB interface available for easy actuation and documentation respectively. In combination with the milling chamber MI 250 MultiDrive basic replaces your M 20 mill. High performance Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output. Interval operation The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling A cooling system is integrated in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. Variety of vessels (accessory) MultiDrive provides the right vessel for each grinding task. Vessels don't belong to the scope of delivery.INCLUDED: The IKA MultiDrive Basic includes: - Power Cord - Socket Wrench - Disassembly Tool 1 - Disassembly Tool 2 - Cleaning Brush - USB Cable - USB A to Micro-B, 2 m - 2 Year Manufacturer's Warranty

Hermle 4 x pcr rotor The Hermle 4 x PCR rotor is designed to provide efficient and reliable sample p (more)rocessing in PCR applications. This rotor is compatible with the Hermle Z32-HK, Z327, and Z446 series centrifuges, making it an excellent addition to any laboratory using these centrifuges. The rotor has a maximum speed of 15,000 RPM and a maximum relative centrifugal force (RCF) of 15,343 x g, allowing for fast and efficient sample processing. The rotor has a 45° angle, which ensures the samples are held securely in place and can be easily accessed. This rotor can hold up to 4 x 8-Place PCR strips, providing a total capacity of 32 samples per run. This makes it ideal for laboratories that require a high throughput of samples in PCR applications. The rotor is made from high-quality materials, ensuring its durability and longevity even with repeated use. Its design allows for easy and quick loading and unloading of samples, increasing the efficiency of the centrifugation process. INCLUDED: The Hermle 4 x pcr rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty