Arctiko MUF-40 35L -86°C Small Ultra Low Temperature FreezerUltratiefkühlschrank

New Brunswick Ultra Low Temperature Freezer U570 This was removed from a university lab where it was (more) surplus to requirements. It powers up and is in full working order (digital thermometer not included and used for testing only). It is in good cosmetic condition with minor marks. Internal dimensions: 1265 x 765 x 575 mm

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus EX125D Explorer Semi-Micro Dual Range Analytical Balance The OHAUS EX125D Explorer semi-micro  (more)balance has been designed with the technology to ensure that your very specific weighing results are accurate. Sophisticated laboratories requiring accuracy and looking for innovative technology to obtain measurement results can find both in Explorer semi-micro balances. It has a max dual weight capacity of up to 52 g/120 grams, and a dual readability of 0.01mg/0.1mg. Internal Calibration OHAUS' signature AutoCal internal calibration system provides routine maintenance by automatically calibrating the balance every time it senses a temperature change of 1.5°C or every 3 hours, whichever occurs first. This helps ensure the accuracy of the balance when the operator has not performed a manual calibration or when the proper calibration masses are unavailable. In addition, to minimize weighing errors and ensure accurate measurements, AutoCal utilizes two internal weights to perform a linear calibration. Intuitive Software Provides an Extremely Modern User Experience The EX125D includes many facets of modern technology to provide the best weighing experience possible. The icon-based navigation provides tactile feedback and operates in the same manner as a smart phone or tablet computer. The EX125D Explorer semi-micro balance has been designed and constructed to provide a modern weighing experience as well as to bolster accuracy. Click Here to View Product Video INCLUDED: The Ohaus EX125D Explorer Semi-Micro Dual Range Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus EX125 Explorer Semi-Micro Analytical Balance The OHAUS EX125 Explorer semi-micro balance has b (more)een designed with the technology to ensure that your very specific weighing results are accurate. Sophisticated laboratories requiring accuracy and looking for innovative technology to obtain measurement results can find both in Explorer semi-micro balances. It has a max weight capacity of up to 120 grams, and a readability of 0.01 mg. Internal CalibrationOHAUS' signature AutoCal internal calibration system provides routine maintenance by automatically calibrating the balance every time it senses a temperature change of 1.5°C or every 3 hours, whichever occurs first. This helps ensure the accuracy of the balance when the operator has not performed a manual calibration or when the proper calibration masses are unavailable. In addition, to minimize weighing errors and ensure accurate measurements, AutoCal utilizes two internal weights to perform a linear calibration. Intuitive Software Provides an Extremely Modern User Experience The EX125 includes many facets of modern technology to provide the best weighing experience possible. The icon-based navigation provides tactile feedback and operates in the same manner as a smart phone or tablet computer. The EX125 Explorer semi-micro balance has been designed and constructed to provide a modern weighing experience as well as to bolster accuracy. Click Here to View Product Video INCLUDED: The Ohaus EX125 Explorer Semi-Micro Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This was removed from a laboratory where it was surplus to requirements. The system powers up and is (more) in reasonably good cosmetic condition with marks from use, though there is a plate/tray missing from the front of the XT-2000i Included are; 1 x Sysmex XT-2000i Automated Hematology Analyzer 1 x Pneumatic Unit Model - PU-17 Software discs:-Sysmex XT-2000iV Version 00-10Sysmex SUIT Software Version 2.4.0.0 + USB Back up toolSysmex Recovery DVD-ROM XE XT XS IPU DC8000Sysmex Sybase iAnywhere 5.5.04Sysmex XT-2000i System Program Type 3XT21 Ver. 15979 (Floppy disk)

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

MARSHALL Select MS-RE100 Tube Roller, 10-100 RPM Speed Range 10 to 100 RPM Number of Rollers 6 Maxi (more)mum Load 8.8 lb. (4 kg) Features - Rocking and rolling motion with a 24 mm amplitude ensures thorough mixing - Accepts tube diameters ranging from 6 to 34 mm, accommodating a variety of tubes - Roller length of 11 in. (28 cm) allows for simultaneous processing of multiple tubes - Equipped with a quiet, maintenance-free brushless DC motor for long-lasting reliability - LCD display provides clear monitoring and setting of speed and timer - Timer settings adjustable from 1 minute to 23 hours and 59 minutes or continuous operation - IP21 protection class secures the device against solid objects and minor water exposure - Rollers are designed for easy cleaning to maintain hygiene and efficiency - Ideal for mixing blood samples, viscous substances, and liquid-solid suspensions - Provides a safe and effective solution for various applications in medical and research labs The MARSHALL Select MS-RE100 Tube Roller is meticulously designed to provide a gentle yet highly effective mixing experience, perfect for handling delicate materials such as blood samples, viscous substances, and liquid-solid suspensions. This roller is versatile, accommodating a wide range of applications including the prevention of blood coagulation and immune precipitation. Equipped with a variable speed range from 10 to 100 RPM, the MS-RE100 offers precise control over mixing intensity. Its rocking and rolling motion, with a rocking amplitude of 24 mm, ensures thorough and uniform mixing. The device features six rollers, each 11 inches long, providing ample surface area for efficient and gentle rolling of multiple tubes simultaneously. The rollers are designed for easy cleaning, enhancing laboratory hygiene and maintenance. This tube roller is driven by a quiet, maintenance-free brushless DC motor, ensuring reliable long-term use without the need for frequent servicing. An LCD display allows for easy monitoring and adjustment of both speed and timer settings, with the timer capable of being set from 1 minute up to 23 hours and 59 minutes or continuous operation. With a maximum load capacity of 8.8 lb. (4 kg) and the ability to accept tube diameters from 6 to 34 mm, the MS-RE100 is a highly adaptable tool for any laboratory. The unit also features IP21 protection class, providing basic protection against solid objects and dripping water, ensuring durability and safety in a busy lab environment. INCLUDED: The MARSHALL Select MS-RE100 Tube Roller, 10-100 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Edwards nEXT730D - CF160 BP NW25 Turbomolecular Pump Ultimate Vacuum <6x10-10 mbar Inlet Connecti (more)on DN 160 CF Pumping Speed Nominal 41,400.00 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With the nEXT730 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 730 l/s.INCLUDED: The Edwards nEXT730D - CF160 BP NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW