Transmission electron microscopes

HI-7662 Temperature Probe HANNA new Temperature probe for use with the HACCP Compliant Salinity Fo (more)odcare Meter HI-931101.

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. For: - Hei-Tec - Hei-Connect - Hei-End

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V Temperature Ra (more)nge Ambient +5°C to 260°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Wide temperature range, maximum operation temperature up to 700°C - Equipped with high operability temperature controller - Can be used as an electric furnace for ashing and sintering, but also as an incubator and drying oven - Temperature, measured temperature and overheat prevention temperature can be digitally set by operation menu and ▲/▼ keys - Easy programmable operation, fixed temperature, quick auto stop, auto stop, program auto start, auto start - Lock function, auto recovery after power failure, calibration offset The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scientific Industries Genie Temp Shaker w/ Adhering Mat GENIE Temp-Shaker 300 with Adhering Mat prov (more)ides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Adhering Mat Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 315 x 315mm (12.5 x 12.5in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE

Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform GENIE Temp-Shaker 300 with Flask Cla (more)mp Platform provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform Specifications Speed (RPM) 10 – 300 RPM including stir reverse Timer 1 min - 99 hours w/Alarm or Continuous Orbit 35mm Selectable Ramp Rates 10 - 100 rpm/sec Product Weight 21 Kg (46 lbs.) Dimensions (base) 460 x 460mm (18 x 18in) Overall (D x W x H) 590 x 500mm (23 x 20in) Warranty 24 months Markings CE

Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps GENIE Temp-Shaker 300 with Un (more)iversal Ratcheting Clamps provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 305 x 305mm (12 x 12in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE

Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz3D Visualization (more) of the Polyscience Immersion CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block iframe{height:315px !important;} The Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Large, universal icon and English display On-screen prompts Single-point calibration capability For laboratory use only Suitable for tank capacities up to 28 liters Click Here to View Product Video INCLUDED: The Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 342691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 342691001 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixtures, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342691001 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342691001 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 342491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixture, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty