TESTO 174 T temperature recorder kit

Global Process Concept Sarl Temperature Controller.

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and good working order, it has been tested to its minimum temperature of -45ºc with our external thermometer reading -43.3ºc. (Not included). This item features: 4 x shelves (55x55cm)

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

LEICA EM-PACT 1 High Pressure Freezer w/ EM-AFS Low Temperature Embedding System This was removed fr (more)om a university lab where it was surplus to requirements. The system powers up but we were unable to test it properly without access to liquid nitrogen. The lab did confirm it was in working order when last used. It is in good cosmetic condition with minor marks. Included are; LEICA EM-PACT 1 High Pressure FreezerType: 706802Serial#: 519799 LEICA EM-AFS Low Temperature Embedding SystemType: 702701Serial#: 518928 LEICA EM-UVType: 702727Serial#: 519711 JDC- 10 10 litre Dewar vesselSerial#: 00958 Also included is the following: 2 x Application of the Leica EM PACT2 and EM RTS Disc LEICA EM AFS Operating Manual LEICA EM PACT Operating Manual LEICA EM PACT Application Brochure 5 x Service kit with various replacement parts

Corepoint Scientific NSWDUF171JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 1 (more)15V Temperature Setpoint Range -50°C to -86°C Capacity 17 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF171JWJ-0 is an upright ultra low temperature laboratory freezer designed to maintain temperatures between -50°C to -86°C, ideal for demanding cold storage applications. This 17 cu.ft. capacity freezer features a solid swing exterior door with five insulated inner doors, a triple gasket seal, and a vacuum relief port for quick access after door closures. It is equipped with a microprocessor controller, touch pad keys, and a large LED temperature readout for easy programming and monitoring. The freezer includes audible and visual alarms with programmable high and low temperature set points, an automatic voltage boost, and battery backup for electronics during power outages. For security, it offers a programmable access code, a key lock on the cam action handle, and door switch alarms. The interior boasts four heavy-duty stainless steel adjustable shelves and four heavy-duty swivel casters with locks for mobility. Additionally, the freezer uses CFC-free refrigerant and is made in the USA, ensuring high efficiency and low noise operation with two compressors and a 300 BTUh reserve capacity. INCLUDED: The Corepoint Scientific NSWDUF171JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 115V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The FACSCanto II system is an easy-to-use benchtop analyzer that delivers proven performance, accura (more)cy, and high-quality results. The FACSCanto II can be configured with two or three lasers to detect up to eight colors. It features many innovations, including a true fixed alignment flow cell to minimize startup time and improve  reproducibility. The optical system maximizes signal detection and increases sensitivity and resolution for each color in a multicolor assay. These and other capabilities make the BD FACSCanto II ideal for today’s busy clinical lab, providing a high degree of automation and quality control. With optimal reproducibility, the FACSCanto II system reduces hands-on technician time and costs associated with repeat testing. Lasers: 405-nm solid state diode, 30-mW fiber power output 488-nm solid state, 20-mW laser output 633-nm HeNe, 17-mW laser output Laser Configuration: Spatially separated beams with 9 x 65- μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 180 x 430-μm rectangular quartz flow cell Collection Optics: Optical-gel coupled 1.2 NA lens FSC Resolution: 1.0 μm SSC Resolution: 0.5 μm Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT FSC Detector: Photodiode with 488/10 BP SSC Detector: PMT with 488/10 BP Fluorescence Detectors: 8 PMTs in 4-2-2 configuration Violet Laser Dyes: Pacific Blue, AmCyan (455, 488 nm) Blue Laser Dyes: FITC, PE, PerCP or PerCP-Cy 5.5, PE-Cy 7 (525, 575, 678 or 695, 785 nm) Red Laser Dyes: APC, APC-Cy7 (660, 785 nm) Detector Bands: Violet Laser: 450/50; 502 to 525 nm Blue Laser: 530/30; 585/42; >670; 780/60 nm Red Laser: 660/20; 780/60 nm Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF Max Particle Size: 50 μm Sample Flow Rate: 10 μL/min to 120 μL/min Sample Acquisition Rate: 10,000 events/second, 6 compensated fluorescence parameters and 2 scatter parameters Sample Dead Volume: 30 μL (BD Falcon tubes 12 x 75-mm) Dimensions (DxWxH): Cytometer: 610 x 910 x 640 mm Fluidics cart: 610 x 790 x 640 mm Weight: Cytometer: 145 kg Fluidics cart: 51 kg

Izon Science Ltd - qViro Virus Viral &nbsp;Particle Analysis System This was removed from a univers (more)ity lab where it was surplus to requirements. The item powers on and comes with a USB cable and power supply. It is in good used cosmetic condition.

Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit Glass Pla (more)te Size (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Quick, excellent results using minimal buffer - Passive cooling produces gels with straight lanes and sharp bands - Cast your own or use precast gels from a variety of manufacturers - Transfer up to 4 gels in 45 minutes with only 300 ml buffer using optional SE302 Blot Modules - Designed for use with a wide variety of precast gels The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit is a versatile and robust system designed to deliver high-quality electrophoresis and blotting results. This compact unit allows for both protein separation and electro transfer, making it an ideal choice for labs needing efficient and reliable equipment. The SE300 miniVE features passive cooling to ensure straight lanes and sharp bands, while using minimal buffer for quick, precise outcomes. Users can cast their own gels or opt for a range of compatible precast gels from various manufacturers, adding to its flexibility. With the optional SE302 Blot Modules, this unit can transfer up to four gels in just 45 minutes using only 300 ml of buffer, enhancing both efficiency and resource conservation. The complete unit includes essential components such as a lower buffer chamber, gel modules with gaskets, glass plates, combs, T-spacers, and more. Built for durability and ease of use, the SE300 miniVE ensures that researchers can achieve consistent, high-resolution results, making it a dependable asset for any laboratory focused on protein analysis. Please note: 1.0mm T-Spacers are included with purchase. Additional T-Spacers are available for purchase separately. INCLUDED: The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit includes: - Lower Buffer Chamber (tank) - Gel Modules with Gaskets, 2 assemblies - Safety Lid with High Voltage Leads - Glass Plates, Rectangular, 10 x 10.5 cm, 3 pcs - Glass Plates, Notched, 10 x 10.5 cm, 3 pcs - Combs, 10-well, 1.0 mm thick, 2 pcs - T-Spacers, 1.0 mm thick, 4 pcs - Well-Locating Decals, 2 pcs - Wonder Wedge Plate Separation Tool - Gel Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Accuris PR1000-HS-6000 Hot Start Taq, 6000 Units Engineered for controlled polymerase activity, Accu (more)ris Hot Start Taq is bound with a monoclonal antibody that blocks enzyme activity. This allows reactions to be set up at room temperature without the risk of non-specific amplification.When samples are ready, the reaction mixture is heated to 95°C to denature the antibody and initiate the reaction. Similar to the standard Accuris Taq, Hot Start Taq is provided with a 5X buffer, or in a ready to use 2X Master Mix. The Master Mix can be ordered with or without an incorporated red gel loading dye. The Red Dye Master Mix incorporates a red loading dye that allows amplified samples to be loaded directly on an agarose gel. The red color aids in visualization during pipetting, and higher density of the buffer ensures that the samples will drop into the gel wells. INCLUDED: The Accuris PR1000-HS-6000 Hot Start Taq, 6000 Units includes: - Accuris Hot Start Taq DNA Polymerase 6000u (5u/µl - Manufacturer's Documentation - 2 Year Manufacturer's Warranty