Scilog SciTemp Single Use Temperature Sensor

This Thermo Scientific Forma 905 -86 ULT Ultra-Low Temperature Freezer was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in good working order to -85˚C. It was tested with a digital thermometer (not included). It is in good cosmetic condition with some minor marks from previous use. Internal Dimensions: L57cm x W48cm x H131cm. Key not included.

LEICA EM-PACT 1 High Pressure Freezer w/ EM-AFS Low Temperature Embedding System This was removed fr (more)om a university lab where it was surplus to requirements. The system powers up but we were unable to test it properly without access to liquid nitrogen. The lab did confirm it was in working order when last used. It is in good cosmetic condition with minor marks. Included are; LEICA EM-PACT 1 High Pressure FreezerType: 706802Serial#: 519799 LEICA EM-AFS Low Temperature Embedding SystemType: 702701Serial#: 518928 LEICA EM-UVType: 702727Serial#: 519711 JDC- 10 10 litre Dewar vesselSerial#: 00958 Also included is the following: 2 x Application of the Leica EM PACT2 and EM RTS Disc LEICA EM AFS Operating Manual LEICA EM PACT Operating Manual LEICA EM PACT Application Brochure 5 x Service kit with various replacement parts

Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform GENIE Temp-Shaker 300 with Flask Cla (more)mp Platform provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform Specifications Speed (RPM) 10 – 300 RPM including stir reverse Timer 1 min - 99 hours w/Alarm or Continuous Orbit 35mm Selectable Ramp Rates 10 - 100 rpm/sec Product Weight 21 Kg (46 lbs.) Dimensions (base) 460 x 460mm (18 x 18in) Overall (D x W x H) 590 x 500mm (23 x 20in) Warranty 24 months Markings CE

Accuris MS1000 SmartSeal Semi-Automated Microplate Sealer Sealing Time 0.5 Sec. to 10 Sec. (1 Sec. I (more)ncrements) Temperature Range 80°C to 200°C Heat-Up Time 6 Minutes to Reach 200°C Features - Fast, reproducible sealing of well plates - Adjustable time, temperature, and pressure for optimized sealing - User friendly controls, load plate and press "Run" to seal - Accepts a wide range of plate types and heights, with a maximum height of 48mm - Variety of thermal films can be accommodated, including thin foil films - Time saving solution for labs and production facilities requiring high quality and consistent plate sealing - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up, but we were unable to test it further at our facility. The lab confirmed it was working before it was replaced but the camera had stopped working making alignment difficult. It is in excellent cosmetic condition with only minor marks. Includes a PC with the following software installed:MALDI-MS Application Ver: 2.8.4 Monitor, Keyboard & Mouse included.

Memmert HCP105 Humidity Chamber 107L, 115V Temperature Range Ambient +7°C to 90°C Humidity Control  (more)20 to 95% RH, or no RH Chamber Volume 107L (3.8 cu. ft.) Features - Ideal for climate and temperature testing, including accelerated life and 85/85 tests - Unsurpassed temperature and humidity uniformity across the chamber interior - Easy-to-use ControlCOCKPIT interface and AtmoCONTROL software for intuitive programming - Durable stainless steel construction that’s scratch-resistant and easy to clean - Six-sided heating, including heated inner glass door, to prevent condensation - Aluminum thermal layer for optimal temperature distribution and energy retention - Battery-buffered ControlCOCKPIT and optional MobileALERT for enhanced monitoring - Wide range of customizable test parameters for environmental simulation - Rear-panel feed-through and process runtime delay for precise test control - Comprehensive alarm functions and three-fold overtemperature protection for sample safety The Memmert HCP105 Humidity Chamber 107L, 115V is engineered to deliver precise climate and temperature control, making it ideal for a wide range of environmental and accelerated life tests, including the rigorous 85/85 tests. Offering a temperature range from Ambient +7°C to 90°C and active humidity control from 20% to 95% RH, this chamber creates a stable and highly customizable testing environment with an exceptional homogeneity of temperature and humidity throughout. Designed with Memmert’s user-friendly ControlCOCKPIT interface and the advanced AtmoCONTROL software, it features intuitive “Touch, turn & go” operation, allowing for straightforward programming of complex test parameters. Constructed with robust stainless steel that is scratch-resistant and hygienic, the HCP105 is built to withstand extensive use while maintaining a sleek, easy-to-clean design. Its advanced heating concept includes heating elements on all six sides and a heated inner glass door to prevent condensation and ensure uniform conditions. An integrated aluminum thermal conductive layer aids in maintaining optimal temperature distribution, while also providing a heat reservoir in case of power fluctuations. The chamber’s efficient humidity control prevents condensation buildup, protecting sensitive samples and reducing maintenance requirements. To support continuous and demanding tests, the HCP105 includes various convenience features like a rear-panel feed-through, battery-buffered ControlCOCKPIT for enhanced security, and optional MobileALERT for remote monitoring of alarm conditions via email or SMS. Additional safety features include three-fold overtemperature protection and real-time display of all essential parameters. With comprehensive programming options, reliable alarm functions, and precise environmental simulation, the Memmert HCP105 ensures both safety and accuracy, providing an optimal solution for laboratories focused on climate and temperature testing. INCLUDED: The Memmert HCP105 Humidity Chamber 107L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - 2 x Sponge Plugs for Silicone Entry Ports - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F2 Mass Standard - knob weights, service case. Nominal value - 200 kg.

VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Speed  (more)1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance - High performance even at low vacuum levels - Optimized vacuum even with gas ballast for condensate purge - Whisper quiet and low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance. Two-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with medium vacuum requirements. They do not consume water and therefore do not produce any contaminated waste water. The media contacted materials made of chemically resistant fluoroplastics open a wide range of applications in chemistry and pharmaceutics. The robust design provides very good durability and long service intervals even in demanding chemistry applications. Typical usages are vacuum generation for rotary evaporators, vacuum concentrators, gel dryers, vacuum ovens and many other laboratory applications. The MZ 2C NT is the powerful basic pump for a complete family of well established and reliable chemistry vacuum systems and pumping units.INCLUDED: The VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA CBC ROTAVISC me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range 0.0 (more)1 to 200 rpm Working Temperature -100 to 300°C Features - A second beaker (600 ml) can be pre-tempered during the measurement - Optimized water flow management in the insulated bath for fast and precise temperature control - Equipped with the environmentally friendly natural refrigerant R290 - CBC VISC lite can also be used for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakers - The easily removable and cleanable air filter guarantees optimum performance - ROTAVISC and CBC VISC lite are compatible with the labworldsoft® laboratory software, enabling easy automation, control and documentation of measurement results The viscosity of most liquids depends on the temperature. To obtain reliable measurement results, accurate temperature control is crucial. The CBC IKA CBC ROTAVISC me-vi Viscometer Package is the perfect solution for precise viscosity measurement of temperature-dependent samples in the laboratory. The ready-to-connect package combines the IKA CBC ROTAVISC me-vi Viscometer Package rotational viscometer with the CBC VISC lite heating and cooling bath circulator. The sample is measured directly in the heating bath under controlled conditions. IKA CBC ROTAVISC me-vi Viscometer Package is a high-performance rotational viscometer for applications in a measuring range from 100 - 40,000,000 mPas. The CBC VISC lite heating and cooling bath circulator was specially developed for use with IKA viscometers. It covers a temperature range from -25 °C to 125 °C and offers space for two standard beakers (600 ml). This allows a second sample to be pre-tempered during the measurement. Equipped with natural refrigerant R290, the CBC VISC lite is a sustainable and environmentally friendly alternative.INCLUDED: The IKA CBC ROTAVISC me-vi Viscometer Package includes: - ROTAVISC me-vi control S000 - ROTASTAND - CBC VISC lite - SP set-1 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty