Scilogex D2012 Personal Mini-Centrifuge w/ 12 Position 1.5/2.0ml Micro-Tube Rotor

This listing is for 1 of 2 MSE Micro Centaur Centrifuge. The unit is in full working condition and  (more)is ready for immediate release. The Micro Centaur is a bench top machine designed specifically for centrifuging small capacity tubes. Its small size and light weight make it ideal for transporting by hand, and using in laboratories where space is at a premium.   The Micro Centaur is ideal for hospital and research laboratories, and for applications such as amino acid analyses, enzymatic, biochemical and immune assays, and for the separation of physiological fluids.   Technical specifications: Voltage: 220-240 V Power: 250 W Centrifuge speed: 6,500 rpm or 13,000 rpm Timer: up to 8 minutes Rotor: fixed angle with 12 x 1.5 / 2.0 ml Outer dimensions (W) x (D) x (H): 200 x200 x 190 mm

This Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use. It has 6 x 1000ML Buckets. P/N 44040 The rotor is rated for 5000rpm Max. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810 This item was removed from a unive (more)rsity where it was surplus to requirement. It is in good, used cosmetic condition. Specifications: - Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor - Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket) - Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket - Angle: 45° Fixed, 12 to 87° Swinging Bucket - Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket) - Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

Hermle Z446 Centrifuge w/ Microplate Rotor The Z446 universal centrifuge series offers the highest c (more)apacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Digital Display, Total Control of Operations AREX Digital PRO is the evolution of our best-seller, t (more)he most advanced tool available to date. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). The SpeedServo ™ system ensures a constant speed even when the viscosity varies (counter-reaction). AREX Digital PRO offers the most advanced technology, being equipped with digital displays to set and monitor both stirring speed and temperature constantly and with absolute precision. Temperature regulation of the liquid being processed with an external probe The AREX Digital PRO package includes the external Pt100 probe, capable of reaching 250°C, with an accuracy of ±1.0°C, providing a ready-to-use system capable of directly thermoregulating the sample being processed. Previous model video: Maximum Temperature Homogeneity The particular CerAlTop™ plate, in aluminum alloy coated with a ceramic layer, ensures a formidable homogeneity of the temperature over the entire surface of the plate itself, up to 370°C and at the same time an excellent resistance to chemical agents and ease of cleaning. Maximum Protection, IP 42 AREX Digital PRO magnetic stirrers guarantee a high level of safety and protection for the user. The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. AREX Digital PRO can be programmed with a maximum safety temperature, for some particular applications that require specific temperatures and in order to prevent unpleasant situations. In addition, the electronic board activates a high temperature warning ('Hot Plate Warning') which remains active even with the instrument off, when the plate temperature is above 50°C. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design AREX Digital PRO offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use and make it clear that the digital displays indicating speed and temperature can be read. Greater Versatility with the new MonoAlublock™ and MultiAlublock™ The MultiAlublock™ and the new MonoAlublock™ made of aluminum are ideal for carrying out numerous agitation and heating analyzes, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, you can choose the mix that best suits your needs. Technical features: Pt100 connection: provided. Vertex connection: provided. Counter-reaction: constant speed. Electronic temperature regulation: from room temp. to 370°C. Maximum safety temperature digitally settable: temperature limit can be set between 50 and 370 °C. "Hot Plate Warning"  whenever the top plate temperature is over 50 °C. Sample thermoregulation: ± 0.5 °C by using the Vertex thermoregulator (AREX Digital PRO); ± 1.0 °C by using Pt100. Stirring system: high-power driving magnet type ''PCM'' operated by a mono-phase motor for continuous operation.

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab This system was removed from a university whe (more)re it was surplus to requirement. It is in very good cosmetic condition and powers on. The previous owner has notified us that this system is in full working order. This system includes the following: - Pharmacia LKB VacuGene Pump - ProXPRESS 2D User's Guide - ProXpress Test Sheets - 2950-2017 Gell Cassette Assy - 2950-2019 UV Gel Adaptor (Sealed) - 2950-2048 Calibration Sample Assy - PX2950-2006 - 2950-2049 Standard Wet Gel Cassette Assy - Phoretix Software - Proteome 1D Analyser Software and manual

IKA RV 8 Rotary Evaporator w/ Dry Ice Condenser Speed Range 5 to 300 RPM Temperature Range Ambient (more) to 180°C Maximum Flask Size 3L Features - Manual lift with integrated safety “lift-out-function“ - Water/oil heating bath with integrated ergonomic carryinghandles - Key-button with locking function for the heating bathtemperature - Adjustable immersion angle - Digital displays for rotation speed and heating bathtemperature - Single-hand operation; ambidextrous design - Speed range 5 - 300 rpm - Additional user safety through reduced 24 V powerrequirements within the unit - Compatible with the complete range of IKA RV 10 glassware - New clamp mechanism The IKA Rotary Evaporator range gets a new family member -the RV 8. This new distilling system completes the existing series by adding afunctional basic model. The manual lift, with ambidextrous design, allows forprecise positioning of the glassware. Digital displays for rotation speed andheating bath temperature allow for optimal control of all distilling processes.New clamp mechanism to simplify the changing of evaporation flasks. INCLUDED The IKA RV 8 Rotary Evaporator w/ Dry Ice Condenser includes: - RV 8 S099 - HB digital S099 Heating Bath - RV 10.4 Dry Ice Condenser - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 8 Rotary Evaporator w/ Dry Ice Condenser Specifications Type of coolingverticalCooling surface620 cm2Motor principle DCSpeed range 5 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke120 mmHeating temperature rangeroom temp. - 180 °CHeat output1300 WSet temperature resolution1 ±KFilling volume max.3 lDimensions (W x H x D)510 x 490 x 345 mmWeight15.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WDC Voltage24 VComparison of ModelsSpecificationsRV 10 Digital w/ Dry Ice CondenserRV 3 w/ Dry Ice CondenserRV 8 w/ Dry Ice CondenserType of coolingVerticalVerticalVerticalCooling surface620 cm²1500 cm²620 cm²Speed range5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorManualManualStroke140 mm150 mm120 mmHeating temperature rangeRoom temp. - 180 °CRoom temp. - 99 °CRoom temp. - 180 °CFilling volume max.3 L3 L3 LTimerYesYesYesDimensions (W x H x D)500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmRS 232 interfaceYesYesYesVoltage220 - 240 / 115 / 100 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }Request a Formal Quote

KNF UN820.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 20L/min (1.2 m3/ (more)h) Protection Class IP44 Features - 100% oil free transfer - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically-resistant PTFE/FFPM flowpath - Suitable for aggressive or corrosive gases and vapors - Maintenance-free - Environmentally friendly - Compact, quiet and reliable TheKNF UN820.3FTP IP44 Diaphragm Pump isa dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN820.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone Bulk Tray Dryer with 6-Port Manifold and IsolationValve 115V,50/60Hz FreeZone Bulk (more) Tray Dryers lyophilize moderate to large bulksample loads or numerous small batches of vials or serum bottles. The Bulk TrayDryers have three large, 12.7” x 16.6” shelves that heat up to +60C. Optionsinclude a 6-port manifold, isolation valve, additional heated shelves andsample trays. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen.Features Provides precise control and program flexibility for consistent performance Three 12.7 x 16.6 in. heated shelves with sensors for monitoring sample temperature provide 632 sq. inches of shelf space Microprocessor maintains system temperature within 3C of set point Clear acrylic viewing door provides complete visibility of shelves Lyo-Works™ OS provides flexible programming and control with real time display of freeze dryer and tray dryer parameters on 5 in. full color touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) One-touch data logging and display provides information to maximize sample quality and minimize run time INCLUDED: The Labconco 780601300 FreeZone Bulk Tray Dryer with 6-Port Manifold and IsolationValve 115V,50/60Hz includes: - Communication Cable - Hardware (Screws x 8, Nuts x 4, Washers x 8) - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) Ne (more)w equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths