BOC Edwards Model: XDS5 A724-01-903 Scroll Vacuum Pump

This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in (more) full working condition and is ready for immediate release. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requi (more)rements. The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1 The item is in good cosmetic condition but has marks and stains from use.

This Hewlett Packard Cohesive Technologies 1100 Series G1310A Isocratic Pump was removed from a univ (more)ersity lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - (more) High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Freestanding design driven by a flexible coupling with either a single-phase or three-phase (four pole) motor - Achieves excellent vacuum levels, including 1 x 10⁻³ mbar without gas purge and 1.5 x 10⁻¹ mbar with gas purge - Equipped with NW25 inlet connection and a removable 15 mm nozzle outlet, allowing flexible integration into existing systems - Operates efficiently within a temperature range of 13-40°C, accommodating different environmental conditions - Facilitates easy oil changes with a maximum oil capacity of 1.05 liters and a minimum capacity of 0.75 liters - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E2M18 Vacuum Pump The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.Click Here to View Product Video INCLUDED: The Edwards E2M18 Vacuum Pump includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

·       Triple Quad MS/MS ·       Ion Max ESI, APCI and APPI Source ·       Mass Range: m/z 30–1500  (more)·       H-SRM up to 0.2Da resolution ·       Fast positive/negative mode switching ≤ 25 ms ·       2 Edwards Rotatary vane Pumps ·       Xcalibur Data System ·       Surveyor HPLC included ·      Option: Other HPLC systems available

RAYPA IRE-160 refrigerated incubator. Capacity 160 L. Temperature range 0º C to 45 ºC. Forced air ci (more)rculation. Stability ± 1.5ºC; homogeneity ± 1.5 ºC. Digital temperature and time control. Two internal sockets for equipment connection. RS232 connection. Closing. Includes three trays. Dimensions (H*W*D): inside 73*51*43 cm; exterior 94*60*60 cm. Weight 75kg. User manual. Raypa IRE-160 refrigerated oven applications: Water analysis, B.D.O. (Biological Oxygen Demand), enzymatic reactions and bacterial cultures at low temperature, botany, conservation of samples, aging, cosmetics, etc.

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 200 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equippe (more)d with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer&#39;s device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2&times;RS232, 2xUSB type A, Ethernet, 4&times;IN, 4&times;OUT, Wi-Fi. MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

Julabo MAGIO MS-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Working T (more)emperature Range -30°C to 200°C Cooling Capacity 330W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty