Hewlett Packard Cohesive Technologies 1100 Series G1310A Isocratic Pump Lab

Technical features Flow rate 0.5–3.0 l/min Suction (max.) 3 mWg Operating pressure (max.) 1 bar (rel (more).) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head This was removed from a lab (more)oratory where it was surplus to requirements. The unit powers up but is missing its control interface, but it is operable. Included are; KrosFlo Research II Pump:Model No. 900-1612 MasterFlex Pump Head:Model No 900-1613 Tubing Sizes:L/S 13, 14, 16, 25, 17, 18 Accessories: 1x RS232 to Male DIN Cable: 2x Pairs of GripsMaterial: Plastic 2x ArmsMaterial: Metal The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary. 1x Misc GripMaterial: Aluminium The unit is in good cosmetic condition. 2x Arm Grips:Material Plastic The units are in good cosmetic condition. They hold position well against the metal upright arms. 

Hoefer VP200 Diaphragm Vacuum Pump for GD2000 Vacuum Gel Dryer Ultimate Pressure 9 mbar Max. Pumpin (more)g Speed(60 Hz) 1.2 cfm Rated Motor Speed at 50/60 Hz 1500/1800 rpm Features - Optimized for use with the Hoefer GD2000 Vacuum Gel Dryer - High resistance to water vapor, acid, and gel staining solution vapors - Dual vapor trap flasks to capture condensate at pump inlet and outlet - Easy-to-remove flasks with single clamp design for quick cleaning - Robust, user-friendly design requiring minimal maintenance - 180 W motor with overload cutout for motor protection - Quiet operation with sound pressure level of 41 dBA - IP 54 protection rating for enhanced durability in lab environments The Hoefer VP200 Diaphragm Vacuum Pump is designed for efficient, reliable gel drying on the Hoefer GD2000 Vacuum Gel Dryer. Engineered to withstand exposure to water vapor, acidic solutions, and gel staining vapors, the VP200 is both robust and highly resistant to corrosive conditions. This vacuum pump includes dual vapor trap flasks at both the inlet and outlet to capture condensate, which can be quickly removed for cleaning thanks to a single-clamp design. With a powerful 180 W motor and a quiet 41 dBA operation, the VP200 operates smoothly with minimal maintenance required. Its IP 54 protection rating and durable construction make it a dependable choice for rigorous lab environments. INCLUDED: The Hoefer GD2001 Vacuum Gel Dryer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND MD 4C VARIO Select Chemistry Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum  (more)Pumping Speed 2.7 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Meets high vacuum requirements for most high boiling solvents The MD 4C VARIO select pump is an excellent solution for labs working with most high boiling point solvents. The pump's three stage configuration gives it an ultimate vacuum rating of 1.5 mbar. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU-SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary. VARIO's on-demand motor speed control results in whisper-quiet operation and unparalleled length of service intervals for wear parts. Typical applications are all evaporation processes. They can be run fully automatically and with shorter process times and extra sensitivity even for challenging mixtures at the same time. The VARIO® control ensures high process reliability through prevention of boiling retardation or foaming. It detects boiling pressures automatically and self-adapts to changing process parameters at any time. This is all without any need for parameter input or the use of a solvent library. Also, in many other applications and in laboratory vacuum networks the VARIO control brings significant advantages as it always provides the appropriate pumping speed. The VACUU-BUS interface facilitates a user-friendly configuration of even complex vacuum installations. INCLUDED: The VACUUBRAND MD 4C VARIO Select Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN816.3KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 20 mbar (abs.) Maximum Flow Rate 16L/min (1 (more).8 m3/h) Protection Class IP20 Features - Small footprint - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.3KT.45P IP20-T Diaphragm Pump isa single-head, dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN816.3KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm Features: - Recommended for standard  (more)applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 1.6-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm includes: - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Genetix Qpix2 Benchtop Colony Picker was removed from a university lab where it was surplus to  (more)requirements. The lab said it was fully working prior to removal but unfortunately it seems like the dongle for the software has been misplaced. Included are; 1 x Genetix Qpix2 Benchtop Colony PickerInside dims - D67 W100 H35cmWe powered up the unit but were unable to test if further. Inside side panel of bottom unit - Jun-Air Model 400 Oil-Less Compressor - It powers on and works 1 x PC, Monitor, Keyboard & Mouse - All power on and work, the pc has the software listed below. The item is in a reasonable, used cosmetic condition. Manuals/Software:-QPix2 User ManualReplicating Application GuideGridding Application GuidePicking Application GuideQSoft Data Tracking Application GuideQFill2 User ManualQScan User GuideaQuire User GuideDiscs:-QSoft xp Build 6400.16QSoft xp Build 6100.11QSoft xp Build 6300.01QScan beta 1QP2231 (Floppy Disk) Boxed Accessories/Consumables include:-Metrologic Scanner6 x Master PL-L 840/4P Light bulbsLots of various Slides inc. brands Genetix & EZ-RaysGenetix Micro Spotting PinsGenetix Microarray Spotting SolutionVarious Packs of Glass Beads2 x Plastibrand Tip-RacksVarious other spare bits/parts16 x New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)1 x Box of ISS 10ml Specimen Collection Tubes (QTY 500)

IKA M20 Universal Mill Useable Volume Max. 250 ml Speed Max. 20000 rpm Feed Grain Size Max. 7 mm  (more)Features - Double-walled grinding chamber with water cooling for precise temperature control. - Removable grinding chamber for easy cleaning. - Dual operation capability with two grinding chambers using one drive unit. - Includes M 21 blade for efficient grinding of hard and brittle substances. - Robust stainless steel construction for durability and reliability. The IKA M20 Universal Mill is a robust batch mill designed for dry grinding of hard and brittle substances up to 250 ml at a fixed speed of 20,000 rpm. Featuring a double-walled grinding chamber with water cooling capabilities through two hose adapters, it ensures precise temperature management during operations. The removable grinding chamber simplifies cleaning and maintenance, while its dual-chamber operation with a single drive unit enhances versatility. This mill includes the M 21 blade, crafted from stainless steel, to effectively handle challenging milling tasks in laboratory settings.INCLUDED: The IKA M20 Universal Mill includes: - M20 Mill - M 21 Blade - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA M20 Universal Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input450 WMotor rating output225 WSpeed max.20000 rpmCircumferential speed max.72 m/sUseable volume max.250 mlFeed hardness max.5 MohsFeed grain size max.7 mmMaterial beater/cutterstainless steel 1.4034Material milling chamberstainless steel 1.4301Power-ON time7 min Power-OFF time10 min Milling chamber, can be cooled with wateryesMill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)170 x 350 x 170 mmWeight6.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 115 / 100 VFrequency50/60 HzPower input550 W Request a Formal Quote

Hermle Z600-500-P 500ml, Centrifugal Basket, Non-Perforated Benchmark Hermle, Z600-500-P, 500ml, Cen (more)trifugal Basket, Non-PerforatedINCLUDED: The Hermle Z600-500-P 500ml, Centrifugal Basket, Non-Perforated includes: - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z327-K Centrifuge Tissue Culture Bundle w/ swing out rotor for 15ml and 50ml tubes, 115V Spee (more)d Range 200 to 18,000 RPM Max Capacity 4 x 200ml Max. RCF 23,542 x g Features - 120 V / 50-60Hz - Speed Range: 200 to 18,000 rpm - Max. RCF: 23,542 xg - Max. Capacity: 4 x 200 ml - Timer: up to 99 hr., 59min and continuous - Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml) - Swing out plate rotor accepts deepwell plates - Extremely versatile, 17 rotor options - High speed rotors (up to 23,542 xg) Introducing the Hermle Z327-K-BND - Refrigerated Centrifuge (120V) with Tissue Culture Package, the ultimate solution for all your centrifugation needs. This bundle includes a Refrigerated Centrifuge, Swing Out Rotor, Round Bucket, and more, making it an all-in-one package for your laboratory.With a speed range of 200 to 18,000 rpm and a maximum RCF of 23,542 xg, this centrifuge is capable of handling even the toughest samples. Its high speed rotors allow for quick and efficient separation, ensuring accurate and reliable results every time.The Hermle Z327-K-BND also boasts an impressive maximum capacity of 4 x 200 ml, making it suitable for a wide range of applications. The swing out rotors can accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml), while the swing out plate rotor accepts deepwell plates, providing flexibility in sample preparation.With its timer that can be set up to 99 hr., 59min and continuous operation, this refrigerated centrifuge offers enhanced control and precision during operation. Additionally, it is extremely versatile, with 17 rotor options to choose from, making it suitable for various laboratory settings and applications.The Hermle Z327-K-BND - Refrigerated Centrifuge (120V) with Tissue Culture Package is an essential tool for any laboratory that demands high-quality and reliable results. With its advanced features and comprehensive package, this refrigerated centrifuge provides unmatched efficiency, precision, and convenience in sample preparation and separation.INCLUDED: The Hermle Z327-K Centrifuge Tissue Culture Bundle w/ swing out rotor for 15ml and 50ml tubes, 115V includes: - Refrigerated Centrifuge (120V) - 4 x 200 ml swing out rotor (no buckets) - 200ml round bucket for Z327-200-AC - (2 Pack) 2 x 50ml conical bucket Z327-200-AC - (2 Pack) 4 x 15ml conical insert for Z327-200-BUK - 5 Year Manufacturer's Warranty