Foster + Freeman Foram 685-2 Forensic Raman Spectrometer w/ PC & Software

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use. The lab reported that it was in good working order prior to removal, but we were unable to test it further at our facility.

Finnigan MAT GCQ Mass Spectrometer Gas Chromograph GC-MS System This was removed from a university l (more)ab where it was surplus to requirements. The Mass Spectrometer powered on with the cooling fan operating and lights illuminating on the front panel. It is in good cosmetic condition with minor marks from use. Finnigan MAT GCQ Mass SpectrometerSerial No. 200295

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Labcold RSBG1030MD Blood Bank RefrigeratorLabcold RSBG1030MD Blood Bank Refrig (more)eratorThe RSBG1030MD Blood Bank refrigerator is the smallest in the Labcold range, this stainless steel lined blood bank is ideal for storing small quantities of red blood cells safely and securely.Adjustable shelves behind clear inner doors ensure stable storage temperatures during door openings, whilst allowing rapid checking of stocks through glass door. Supplied with a key pad lockable door.Although the most compact unit in the Labcold Blood Bank range, this model is a certified Medical Device in accordance with Directive 93/42/EEC and is compliant with BS4376: Part 1:1991.LABCOLD’S UNIQUE ALARM AND CONTROL SYSTEM is fitted providing a constant check of all important performance parameters with clear symbol displays of normal operation or alarm status.A touch panel display constantly shows both chamber and liquid load simulator temperatures. A mutable, audible alarm is standard and remote alarm contacts are provided to integrate with compatible external systems.Features:• Benchtop style.• Stainless steel interior.• 2 Adjustable shelves.• Labcold Alarm and Control System.• 7-day chart recorder.• Dual temperature display with load simulator.• Blood audit interface.• Core temperature action alarm.• Certified Medical Device in accordance with EU Directive 93/42/EEC and is compliant with BS4376: Part 1:1991.Specifications:• Operating temperaute: +4°C.• Capacity (ltr): 88ltr.• Capacity (250ml bags): 30 (approx).• Interior construction: Stainless steel.• Exterior construction: Powder coated steel.• Shelves: 2.• Weight: 42kg.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Accessories S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. RIPF60VL: perforated metal shelf (1 max). CFNUBL: activated carbon electric fan. For more information on the products and safety systems available, we invite you to our dedicated post 'LITHIUMSAFE'.

Stainless steel 4-load-cell ramp platforms, equipped with LD4N platform lifting system useful for ma (more)intenance purposes. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination Objectives S-AP (more)O 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities minimize fatigue during extended periods of operation. - Innovative Module Design - The compact size of the PA53-MET minimizes required installation space. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET is a trinocular metallurgical microscope featuring a reflected intermediate illumination system suitable for bright field observation. It comes equipped with a 100W halogen lamp house and widefield eyepieces offering 10X magnification and a 25mm field of view. The device includes a coded quintuple revolving nosepiece for BF with a DIC slot, and Plan S-APO objectives at 5X, 10X, 20X, and 50X magnification. Additionally, the PA53 MET's design is highly modular, allowing for future upgrades with motorized components. Motic's PA53 MET series microscopes are tailored for industrial quality control and the analysis of opaque materials. They feature semi-apochromatic objectives that deliver sharp, clear images. The microscope's incident illumination supports various contrast methods, including Brightfield, Darkfield, Polarization, and DIC, revealing defects not visible under standard lighting conditions. INCLUDED: The Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination includes: - S-APO S-APO 5X, 10X, 20X, 50X Objectives - Widefield (FN25) eyepiece 10X/25mm - 4x4 inch right hand stage with metal stage plate - PA-25ND6 neutral density filter and PA-25LB LBD filter - Widefield (FN25) eyepiece 10X/25mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level – a (more)nd thus the suction force – is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used (included). The smooth surfaces allow an easy cleaning of the systems. Max. pumping speed: 0.7 m³/h Ultimate vacuum: 150 mbar Vacuum controller: Touchpanel Control range: 150 – 850 mbar (adjustable) Collection bottle: 4l Polypropylene Max. back pressure: 1.1 bar Dimensions (LxWxH): 408 x 194 x 500 mm Weight: 7.7 kg