Radwag C315.60.C3.K Load Cell Platform Scale

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

ARE 6 VELP - Simple, safe and easy to use The central key activates the heating of the plate only af (more)ter pressing it, avoiding accidental switch-ons. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated as long as the temperature is below 50°C. The knobs allow precise adjustment of speed and temperature with greater sensitivity. Unprecedented performance The brushless motor allows stirring up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo ™ system, the speed is kept constant even when the viscosity changes. The Alnico magnet guarantees homogeneous stirring, even in the peripheral areas of the plate and a powerful magnetic coupling between the motor and the stir bar. Maximum Instrument Protection ARE-6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. ARE-6 is guaranteed for 3 years (the warranty extension is obtained by registering the product) The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical features: Motor: Brushless Heating Plate: Aluminum with special protection Feedback System: SpeedServo ™ Temperature Adjustment: Ambient Temperature...+370°C Heating Activation Button: Yes

A homogenizer is a laboratory or industrial instrument used for the homogenization of various types  (more)of materials, such as fabrics, plants, food, soil and many others. The OV 625 Digital laboratory disperser guarantees the highest level of reproducibility for a wide range of laboratory applications. Cutting-edge technology and engineering, like all Velp scientific products, guarantee precision and high shear force for rapid homogenization, emulsification, suspensions and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products. Excellent mechanical properties and high chemical resistance make it suitable for even the most demanding laboratory challenges. DISPLAY AND CONTROL Bright, intuitive LED display and rotary knobs allow you to fine-tune the speed between 3,000 and 25,000 rpm. Clear speed information on a black background aids visibility in all conditions. SAFE AND RESISTANT Safety features ensure maximum operator protection. For example, once the set point speed has been set, the OV 625 Digital will reach it gradually. In addition, various alarms warn the user in case of overload and overtemperature. The resistant and hermetic structure allows correct operation even in the most difficult conditions. Warranty up to 3 years. For maximum comfort, choose the model with the double pole stand. CHOOSE THE SUITABLE ACCESSORY Choosing the right dispersing tool is essential to achieve maximum performance and high reproducibility. VELP dispersion tools are made of stainless steel (316L) and equipped with a PTFE seal, to be compatible with different types of samples and reagents. To handle different fluids, different dispersion tools are required. In some applications it is necessary to use two dispersing tools in order to achieve a final fineness level from coarse to fine. Thanks to a knob and a quick fastening system, inserting and changing the dispersion tool is simple and fast: in seconds you can switch from one application to the next. FOCUS ON THE PRODUCT What is a disperser? The disperser can be called in several different ways: homogenizer; Cell Lysor, High Shear Mixer, Polytron, Stator Rotor Homogenizer, Sonicizer or Tissue Tear. The various nomenclatures are due to the various uses of this tool and you have different results that can be obtained through the accessories. Essentially, a disperser is used to create a uniform mixture by forcing the sample through a narrow, confined space. Blade homogenizers, such as Velp's OV 625 Digital, use the blades as a rotor for dispersing. How does it work? The dispersing tool consists of a rotor rotating at high speed inside a stationary stator. The area between the rotor tip and the stator slot is called the shear gap. Thanks to the high circumferential velocity, the fluid is drawn axially into the dispersion head and forced radially through the cutting gap, breaking up the particles.

Labconco CentriVap Complete Acid-ResistantVacuum ConcentratorTheall-in-one CentriVap Complete Vacuum (more) Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315021 CentriVap Complete Acid-ResistantVacuum Concentrator, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 50 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 15 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.