Thermo Spectronic Genesys 10 vis Lab Spectrometer

A stylish, desktop unit with an integrated touchscreen makes the Beacon perfect for those with limit (more)ed space or as a great point of sale companion inside dispensary environments. Lightweight, portable and user-friendly, the Beacon offers real-time, laboratory grade potency data to any sector within the cannabis ecosystem. Now you can get highly accurate, repeatable results in a flash, at a fraction of the cost. Cannabinoid Measurements: Total potential THC, THC-A, Delta 9 THC Total potential CBD and CBD-A Wavelength Ranges: 1550 – 1985 nm Lamp Type: Tungsten Halogen Dimensions (DxWxH): 220 x 160 x 210 mm Weight: 1.9 kg

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

Perkin Elmer Clarus 500 Mass Spectrometer This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on. When powered on to test, the item began to emit an unpleasant odour. It is listed as Spares/Repairs.

Waters Micromass Q-Tof micro Mass Spectrometer This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used. It is in good cosmetic condition with minor marks.

Varian SpectrAA 220Z Atomic Absorption Spectrometer & Accessories This was removed from a univer (more)sity lab where it was surplus to requirements. Included are; Varian SpectrAA 220Z Atomic Absorption SpectrometerSN - EL01065204 Varian Graphite Tube AtomizerModel - GTA 110Z (100 Series)SN - EL0106407 Varian UltrAA Lamps 1 & 2 Control ModuleSN - EL97063260Powers on Varian VGA 77SN - EL01114913Powers on Electrothermal Temperature Controller & Cell Heater MK2Model - ETC060SN - 94029227Powers on and appears to be in working order with cell heater getting hot. Varian Sample DispenserSN - EL01064640 Applied Thermal Control ChillerPart no. KTD2000SN - 010385Powers on Hollow Cathode Lamps by brand:-Varian SpectAA Lamps:-MercuryArsenicCalcium/Magnesium/AluminiumCobalt/Chromium/Copper/Iron/Manganese/Nickel Varian UltrAA Lamps:-LeadSeleniumArsenicCobalt/Chromium/Copper/Iron/Manganese/NickelSilver/Cadmium/Lead/Zinc 12 x S&J Juniper:-2 x Copper1 x Nickel1 x Tellurium1 x Maganese1 x Potassium1 x Lead1 x Zirconium1 x Cadmium1 x Zinc1 x Iron1 x Sodium 4 x Corning:-1 x Zinc1 x Cobalt1 x Potassium1 x Molybdenum 3 x Activion:-1 x Iron1 x Aluminium1 x Sodium 3 x Southern Spectral Sources:-2 x Neon1 x Argon ASL11 X Neon 6 x Varian Techtron:-MolybdenumTinCopperLeadNickelCadmium 1 x Southern Shandon Neon1 x Baird Atomic Neon2 x Neon Cathodeon1 x Rank Hilger Neon Box full of various small parts including tubing, cables and:-Varian Kit Mixer Paddles MK7 Qty 5Varian UV Lamp3 x Varian Kit MK7 Aqueous Spray Chamber O ringVarian Kit Neb Capillary for MK72 x Boxes of Glassware (99-1000400-00)Box of Kit spares & tools (98-100239-00)Box of 2 Glass Parts (66-100082-00)Box of spares (02-101494-00)Yellow Cell Heater Temperature Sensor PN - 01-106549-90 Software/Discs:-SpectrAA Help & VideosVarian PatchesVarian Atomic Spectroscopy PublicationsVarian Windows UpdateVarian SpectrAA Software BaseVarian SpectrAA Software ProVarian Basic Atomic Absorption Theory Manuals:-Varian SpectrAA Operation ManualVarian OSI Optical Spectroscopy Instruments Log BookVarian Atomic Absorption Maintenance GuideVarian Atomic Absorption Technical PresentationVarian Analytical MethodsVarian Techniques of Graphite Furnace AA Spectroscopy Course ManualVarian Analytical Methods for Graphite Tube AtomizersVarian AA Introducing Atomic Absorption AnalysisApplied Thermal Control Manual

Agilent / HP 1100 Series System With Spiderling Oven, 1100, Degasser, MSD This system was removed fr (more)om a university where it was surplus to requirement. All units are in good cosmetic condition and power on independently, we are unable to conduct further testing at our facility. The lab confirmed the system was working when last used in 2022. This system comprises the following: 1 x Spiderling oven -CS4000 1 x Agilent 1100 Automatic Liquid Sampler -G1313A 1 x HP 1100 Series Diode Array Detector -G1315A 1 x Agilent 1100 Pump -G1312A 1 x HP 1100 series Degasser -G1322A 1 x Agilent MSD -G1956B 1 x HP 1100 Series Solvent Tray-G1322A

CLIMATE CHAMBERS KKP SMART PRO POL-EKO KKP - STABILITY AND NO VIBRATION WITH PELTIER TECHNOLOGY The  (more)Peltier technology of the KKP series offers stable, silent and vibration-free climate conditions, maintaining exceptional temperature and humidity variations and fluctuations. They are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 70°C (max 20°C below room temperature; without humidity) and thanks to a steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKP Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Temperature range without humidity 0…+70°C (max 20°C below room temperature) - Temperature range with humidity +5…+70°C (max 20°C below ambient temperature) - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and - Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKP SMART PRO SERIES POL-EKO offers 2 models of climatic chamber with Peltier cell: KKP 240 of 245 liters and KKP 750 of 749 litres. Reliable. For peace of mind. The Peltier cell-based cooling system features excellent temperature variation and fluctuation. It improves the temperature recovery time (for example after opening the door) and the humidity inside the chamber is extremely stable. In the images below, the temperature/humidity diagram with the test points displayed according to the ICH Q1 A (R2) guidelines and the recording of temperature and humidity over time. STEAM HUMIDIFIER KKP climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Furthermore, thanks to their wide temperature and humidity range they can be used for testing electronic components, plastics or building materials. ENERGY SAVING Thanks to latest generation technology, the KKP series humidifier heats very quickly, using only the water necessary. LOW WATER CONSUMPTION Water consumption is only 90 ml per day for KKP 240 and 290 ml per day for KKP 750 (at 40°C, 75% RH). Water consumption is so low that the tank will only need to be refilled every two months. Furthermore, thanks to a heater in the waste water tank, no maintenance is required and the climatic chamber can be installed anywhere. PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the structure and accessories of the KKP models. 1 - touch control panel 2 - USB port 3 - open door sensor 4 - ø30mm access port for external sensor 5 - room fan 6 - door handle with key lock 7 - shelf 8 - internal glass door 9 - main power socket 10 - fan for electronic compartment 11 - LAN 12 - cooling system based on Peltier modules 13 - humidifier module 14 - drying module 15 - demineralised water tank Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Stainless steel wire shelf - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition. The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 100 g.

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.