New Brunswick Innova U535 Ultra-Low Temp Freezer

Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT It is in good cosmetic condition and powers on, w (more)e are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heidolph Hei-VAP Ultimate HL/G5 Non Coated Hand Lift w/ G5 Dry Ice CondenserThe Hei-VAP Series of ro (more)tary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 7" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Ultimate HL/G5 Non Coated Hand Lift w/ G5 Dry Ice Condenser includes: - Heating Bath - Control Panel - G5 Dry Ice Condenser - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

IKA RV 3 V-C Rotary Evaporator Features - Locking mechanism: red indicator shows unlocked position o (more)f vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The new RV 3 Rotary Evaporator is the ideal entry-level model of the IKA rotary evaporator portfolio. It finds a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing and quality assurance, in laboratories, and in plant construction. Thanks to specially designed glass guides, the transparent vertical coated condenser makes extremely efficient use of the 1500 cm² cooling surface. INCLUDED The IKA RV 3 V-C Rotary Evaporator includes: - RV 3 ECO - RV 3 eco drive - HB eco S099 Heating Bath - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 10.910 coated glassware set - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 V-C Rotary Evaporator SpecificationsType of cooling verticalCooling surface 1500 cm2 Motor principleDCSpeed range20 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight22.31 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V-CRV 10 Auto V-CRV 10 Digital V-CRV 3 V-CRV 8 V-CType of CoolingVertical CondenserVertical Condenser CoatedVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CVacuum Controller IntegratedYesYesN/AN/AN/ATimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.65 kg31.56 kg32.67 kg22.31 kg26.07 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Julabo MAGIO MS-BC4 Heating Circulator, 115V/50-60Hz Working Temperature Range 20°C to 300°C Heatin (more)g Capacity 1000W Fluid Type Water, Silicone Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in cooling coil and drain tap The Julabo MAGIO MS-BC4 Heating Circulator with 4L bath tank and lid with 1 or 2 kW heating power to +300°C. Large, color touchscreen UI with built-in help functions. For internal and external temperature applications. Includes Intelligent Cascade Control, self-optimizing for optimum results with settings for band limit, limit setting, co-speed factor and control dynamics. A variable speed pressure / suction pump provides strong circulation for internal or external applications. A built-in cooling coil enables counter cooling with tap water. Barbed fittings for 8 and 12 mm ID tubing are included (pump connections M16x1 male). Includes Pt100 connection for external monitoring and control, electronically adjustable pressure/suction pump, RS232/RS285, USB and Ethernet ports with optional slot for analog communication (requires module 9900100). Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-BC4 Heating Circulator, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic PA53 BIO Trinocular Upright Biomedical Microscope, 100W Halogen Transmitted Illumination Objec (more)tives S-APO Fluor 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Transmitted, Full Kohler 100W Halogen Illumination - Standard PA53 BIO and PA53 FS6 configurations are equipped with transmitted, full Kohler 100W halogen illumination. - Intelligent heat-reduction engineering ensures you can use our 100w halogen illumination for long periods without worrying about injury due to overheating. - In order to reduce operator eyestrain, the standard PA53 BIO and PA53 FS6 configurations are equipped with super wide-field FN23, diopter adjustable eyepieces. - The 30-degree, Siedentopf type observation tube offer light distribution of 100:0, 20:80, and 0:100 and ensures a comfortable viewing angle during extended use. - Equipped with a multifunctional illumination control knob The PA53 BIOMED Compound laboratory microscope series is designed with the user in mind. In keeping with Motic’s mission statement of providing technologies for people at affordable prices, we are proud to offer our new entry-level high-end microscope series for clinical and life science applications with quality research performance at an affordable price. Our PA53 BIO and PA53 FS6 models have an ergonomic design helping to reduce user fatigue during extended periods of use and also feature an intuitive control layout for optimized and efficient workflow. INCLUDED: The Motic PA53 BIO Trinocular Upright Biomedical Microscope, 100W Halogen Transmitted Illumination includes: - HPlan S-APO (Fluor) 4X, 10X, 40X, 100X Objectives - Wide-field eyepiece 10X/25mm - Dust Cover - Allen Key - Immersion Oil (5ml) - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW