Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT Lab

Raith Elphy Plus Pattern Generator System, LaserInterferometer, Elphy Plus, 6514 This system was rem (more)oved from a university lab where it was surplus to requirement. All included units are in good cosmetic condition and power on, we are unable to conduct further testing at our facility. The previous client has stated the system was in working order when last used, however when removing the stage from the SEM chamber they has found the fibre optic cable had become brittle and cracked. This system comprises the following; - PC Set-Up  Software Installed: ELPHY Plus Raith protocol - Elphy Plus Advanced SEM/FIB Nanolithography system - Precision Stage Controller - LaserInterferometer Source - Raith Motor control unit - Keithley 6514 System Electrometer

Corepoint Scientific NSWDUF251JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 2 (more)30V Temperature Setpoint Range -50°C to -86°C Capacity 25 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF251JWJ-1 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 230V, is designed for demanding cold storage applications, ensuring safe sample and reagent storage. This 25 cu. ft. capacity freezer features high efficiency and low noise operation with two compressors maintaining a 300 BTUh reserve capacity. The interior boasts a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. The unit is equipped with a microprocessor controller with touch pad keys, a large LED temperature readout, and audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The freezer has a cam action handle with key lock, door switch for alarms, four heavy-duty swivel casters with locks, and a CFC-free refrigerant. Made in the USA, this unit is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF251JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 230V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Corepoint Scientific FF201WWW-0MHC -15C to -25C Flammable Material Storage Freezer Temperature Setpo (more)int Range -15°C to -25°C Capacity 20 cu. ft. Defrost Method Manual Features - Microprocessor temperature controller - Digital temperature display with sample simulated probe - Audible and visual high and low temperature alarms - Six fixed shelves - Magnetic door gasket for positive seal - High density urethane foam cabinet and door insulation The Corepoint Scientific FF201WWW-0MHC Flammable Material Storage Freezer is expertly designed to provide secure and reliable cold storage for flammable materials, adhering to stringent safety protocols necessary for laboratory environments. With a 20 cu. ft. capacity, this freezer ensures ample space for safe storage of volatile substances, enclosed within a solid, right-hinged door with a robust magnetic gasket that ensures a positive seal.The freezer's exterior is made from powder-coat steel, offering durability and resistance to corrosion, while high-density urethane foam insulation within the cabinet enhances thermal stability and efficiency. It operates within a temperature range of -15°C to -25°C, controlled precisely by a microprocessor temperature controller with a digital display that is switchable between Celsius and Fahrenheit, providing flexible and accurate monitoring. INCLUDED: The Corepoint Scientific FF201WWW-0MHC -15C to -25C Flammable Material Storage Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Edwards nXR60i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW40 Peak Pumping Speed 60 m 3h-1 Features - Delivers a peak pumping speed of 60 m³/h, ensuring efficient vacuum operations - Maintains a leak tightness of < 1x10⁻⁶ mbar l/s, ensuring reliable vacuum integrity - Weighs only 29 kg (64 lbs), facilitating easy transport and installation - Designed to fit under benchtops, optimizing laboratory space - Ensures a clean, oil-free operation, reducing contamination risks - Keeps the vacuum chamber free from dust, maintaining a clean environment - Offers design flexibility for R&D and industrial applications - Provides reliable vacuum performance over long periods, ensuring operational stability - Simple setup and operation make it accessible for users at all skill levels Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR60i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

IKA Matrix Delta Plus Thermoshaker Heating Temperature Max 110 °C Temperature Setting Range Min -1 (more)0 °C Temperature Stability 0.5 °C Features - Large and clear display with a convenient menu structure allows for an intuitive operation - Reduced waiting time through fast heating and cooling rates of up to 5.5 °C/min (heating) or 2 °C/min (cooling, at set-point temperature between ambient temperature and 30 °C below ambient temperature) - Firm quick-release fastener for quick and easy changing of the inserts/attachments as well as an automatic attachment detection - Automatic performance of heating and cooling tasks through programmable ramps - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness Matrix Delta plus heats and cools reliably with variableinserts. Whether blood samples, pharmaceutical agents, DNA/RNA samples or ELISAassays - reaction vials and plates with even the smallest volumes are reliablytempered in all laboratory applications. In addition, Matrix Delta plus comes with numerous user-friendly features:- Tempering of samples - Synthesis of cDNA - Enzyme-catalysed linking of RNA or DNA (ligation) - Gentle thawing of sample material - Structural change of DNA, RNA and proteins (denaturation) - ELISA assays Click Here to View Product Video INCLUDED: The IKA Matrix Delta Plus Thermoshaker includes: - MATRIX Delta Plus - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Delta Plus Thermoshaker Specifications Maximum load0.3 kgPermissible ON time100 %TimeryesTimer displayTFTTime setting min.1 sTime setting max.6000 minOperating modetimer, continuous and program operationWorking with microtiter platesyesWorking temperature min.room temp. -30 °CTemperature setting range min.-10 °CHeating temperature max. 110 °CHeat output 100 WHeat control TFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 ±°CHeating rate5.5 °C/minTemperature displayyesCooling Rate2 °C/minCooling Power72 Wembedded cooling unityesNumber of exchangable attachments10Fixed safety circuit145 °CDimensions (W x H x D)216 x 127 x 351 mmWeight9.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input230 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

IKA RV 10 Auto Pro Flex Rotary Evaporator Features - 4L heating bath optimized for rapid achievement (more) of working temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided. INCLUDED The IKA RV 10 Auto Pro Flex Rotary Evaporator includes: - RV10 control - HB digital S099 Heating Bath - IKA VACSTAR digital Vacuum Pump - RV 05.10 Balljoint clamp - RV 10.89 Clamp NS 24 - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto Pro Flex Rotary Evaporator SpecificationsType of coolingwithout condenserCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lVacuum controller integratedyesTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight18.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interface yes USB interface yes Analog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationIKA RV 10 Auto Pro FlexIKA RV 10 Digital FlexIKA RV 3 FlexIKA RV 8 FlexType of CoolingWithout CondenserVerticalN/AVerticalCooling Surface1500 cm²0 cm²N/A1500 cm²Speed Range5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorManualManualStroke140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight18.6 kg18.5 kg12 kg22.366 kgRS 232 InterfaceYesYesN/AN/AUSB InterfaceYesYesN/AN/AVoltage100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote

VortaMix Mini Vortexer blue V1000 Argos Technologies New equipment in its original packaging Mini bl (more)ue vortex reference V1000B Speed: 3,000 rpm Weight: 0.55 kg Dimensions: 96 x 85 mm Ambient temperature range: 5...40 °C

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 200 g), wooden box Number of pi (more)eces in the set: 11 weights 1 g i 2 g – solid masses without adjusting chamber