Lamps

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7 is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). AREC 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Lot of 29 Hollow Cathode Lamps - Perkin Elmer - Unicam - S&J Juniper Lab These were removed from (more) a university lab where they were surplus to requirements. The units have not been tested but have been used previously. Included are; 1 x Perkin-Elmer Hollow Cathode Lamp - Element: K-Na1 x Cobalt Hollow Cathode Lamp - Element: IRON.Fe.1 x Pye Unicam Hollow Cathode Lamp - Element: D21 x Activion Hollow Cathode Lamp - Element: Palladium Pd1 x Unicam Hollow Cathode Lamp - Element: Pb1 x Unicam Hollow Cathode Lamp - Element: Zn1 x Unicam Hollow Cathode Lamp - Element: Fe1 x Unicam Hollow Cathode Lamp - Element: Cu1 x Unicam Hollow Cathode Lamp - Element: Ni1 x Unicam Hollow Cathode Lamp - Element: B1 x Unicam Hollow Cathode Lamp - Element: Mn1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: VANADIUM V Wavelength: 318.51 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: COPPER Cu Wavelength: 324.81 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: CADMIUM Cd Wavelength: 228.81 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: ALUMINIUM AL. Wavelength: 396.2/309.31 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: PALLADIUM.Pd. Wavelength: 247.6 nm2 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: LEAD.Pb. Wavelength: 217.0 nm1 x  S&J JUNIPER & CO Hollow Cathode Lamp - Element: ZIRCONIUM.2r. Wavelength: 360.1 nm1 x  S&J JUNIPER & CO Hollow Cathode Lamp - Element: PLATINUM Pt. Wavelength: 265.91 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: CALCIUM.Ca. Wavelength: 422.71 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TITANIUM Ti. Wavelength: 364.3 nm1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: SILVER Ag Wavelength: 328.11 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: MAGANESE.Mn. Wavelength: 279.5 nm.1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TELLURIUM Te. Wavelength: 214.31 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: RHODIUM.Rh. Wavelength: 343.5 nm.1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: ZINC Zn Wavelength: 213.91 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: Na/K. Wavelength: 589.0/766.51 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TUNGSTEN W Wavelength: 255.1

Zeiss Axioplan 2 Imaging Fluorescence Microscope w/ Lamp PSU, HBO/HAL Lab This system was removed fr (more)om a university where it was surplus to requirement. The system is in good cosmetic condition with all included units powering on without any issues. The motorized stage and filter turret, are functioning as intended. The lamp PSU works but does not show lamp hours. We would recommend setting this up with a new mercury lamp system. Modules included: Eyepieces:- 2x Zeiss Pl 10x 25 (P/N: 44 40 34) Nosepiece:- 1x 6-position nosepiece, fitted with the following 2 objectives: - Zeiss CP-ACHROMAT 5x/0.12 ∞/- (P/N: 44 09 20) - Zeiss EC Plan-NEOFLUAR 100x/1.30 oil ∞/0.17 (P/N: 1018-595, 1066-987) Additional items:- 1x Carl Zeiss HBO 100 lamp house (P/N: 1007-980) - 1x Carl Zeiss HAL 100 12v 100w lamp house (P/N: 1039-685) - 1x LEJ ebq 100 lamp power supply (P/N: 1003-928, 426-784) S/N: N40418608 - 1x Zeiss Condenser Achromatic-Aplanatic Swing Out (P/N: 1035-632) - 1x Zeiss Mechanical Stage (P/N: 1067-325) - 1x Zeiss Reflector Turret 322 Synchroflex T 2.5 5/500 with the following filters/cubes: - Filter Set 20, BP 546/12, FT560, BP 575-640 - 02, G365, FT395, LP 420 - Filter Set 10, BP 450/490, FT510, BP 515-565 - 41007, HQ - P/N: 424931 - 30, 150020, Aqua - 2x Iris Stop Slider (P/N: 1062-360) - 1x Filter Slide (P/N: 45 21 74) - 1x VGA type connection cable

Job Lot of Hollow Cathode Lamps These were removed from a university lab where they were surplus to  (more)requirements. There are 46 boxes of various brands, and it is uncertain if they are in working condition except for one box that has been labelled 'Not working.' Job lot includes:- S&J Juniper & CO Palladium 247.6 nm Cat#: 4140S&J Juniper & CO Cobalt 240.7nm Cat#: N/AS&J Juniper & CO Europium 459.4nm Cat#: 4117S&J Juniper & CO Lead 217.0nm Cat#: 3129S&J Juniper & CO Gold 242.8nm Cat#: 4121S&J Juniper & CO Cobalt 240.7nm Cat#: 4113S&J Juniper & CO Tin 233.5nm Cat#: 4162S&J Juniper & CO Gadolinium 368.4nm Cat#: 4118S&J Juniper & CO Chromium 357.9nm Cat#: 5112PES&J Juniper & CO Tellurium 214.3nm Cat#: 4157S&J Juniper & CO Cadmium 228.8nm Cat#: 4108S&J Juniper & CO Selenium 196.0nm Cat#: 4151S&J Juniper & CO Ruthenium 349.9nm Cat#: 4148S&J Juniper & CO Silicon 251.6nm Cat#: 4152S&J Juniper & CO Titanium 364.3nm Cat#: 5163S&J Juniper & CO Rhodium 343.5nm Cat#: 4146S&J Juniper & CO Indium 303.9nm Cat#: 4125S&J Juniper & CO Magnesium 279.5nm Cat#: N/AS&J Juniper & CO Mercury 253.7nm Cat#: 4134S&J Juniper & CO Bismuth Serial#: 73940Baird Atomic LTD Neon 224.6nm Cat#: C832 SNPerkin Elmer Lumina Lamp Part#: N305-0187Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Sb Part#: N066-1284Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Cu Part#: N305-0121Perkin Elmer Intensitron Lamp Part#: N305-0146Enbeeco Hallow Cathode Lamp Ar Type: C831/SrThermo Scientific Hallow Cathode Lamp Palladium Part#: B 89748Hitachi Hallow Cathode Lamp 343.5 Ne Part#: 207-2017S&J Juniper & CO Antimony Part#: 4892dS&J Juniper & CO Molybdenum 313.3nm Part#: 4746S&J Juniper & CO Cadmium 228.8nm Part#: 4101Rank Hilger Pt Cat#: FL2164Varian Fe/Co/Ni/Mn/Cu/Cr Part#: 56-100076-00Hilger & Watts Co/Mn/Fe/Cu Cat#: FL1210Hilger & Watts Ti Cat#: FL1169Pye Unicam Silver Part#: 611472Varian Techtron Pb Cat#: 4R1352Varian Techtron Cd Cat#: 4N934Pye Unicam A1 309.3nm Part#: 9423Baird Ne 249.8nm Cat#: C832-BCathodeon Ltd Ne Cat#: 3QNY/FeS&J Juniper & CO Ca/Mg 422.6/285.2 Cat#: 3621Phillips Cu Part#: 9423 390 30291Activion Ni 232/341 Serial#: 27387

stainless steel clamp / clamp for stirring platform - 50 ml Erlenmeyer For orbital / back and forth  (more)laboratory shaker New material

set of 6 stainless steel pliers / clamps for stirring platform - 300 ml Erlenmeyer For orbital/recip (more)rocating laboratory shaker New equipment in its original packaging

set of 5 stainless steel pliers / clamps for stirring platform - 100 ml bottle For orbital/reciproca (more)ting laboratory shaker New equipment in its original packaging

Haake DC1 Clamp-On Immersion Heater Circulator For laboratory Operating temperature (The working tem (more)perature range is dependant on the cooling selected) : -30°C ... 100°C Température accuracy : 0.02 K 1000W 300 Mbar 17l/Min Immersion Depth 85 to 140mm 220V

HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS Diganostic Instruments For Micros (more)cope The ZN Clamp is compatible with the following Zeiss microscope models: Axiophot Zxioplan Axioskop

HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS Diganostic Instruments For Micros (more)cope The ZN Clamp is compatible with the following Zeiss microscope models: Axiophot Zxioplan Axioskop

HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS Diganostic Instruments For Micros (more)cope The ZN Clamp is compatible with the following Zeiss microscope models: Axiophot Zxioplan Axioskop

set of 2 stainless steel pliers / clamps for stirring platform - 2000 ml / 2 liter bottle For orbita (more)l/reciprocating laboratory shaker New equipment in its original packaging

HR070-CMT 0.70X High Resolution C-Mount Adapter with ZN clamp ZEISS Diganostic Instruments For Micro (more)scope The ZN Clamp is compatible with the following Zeiss microscope models: Axiolab Axioplan-2 Axiophot-2 Axiotech Axioskop-2 Axiostar Axioskop-40 with Zeiss Standard trinocular tube Axiovert models 100, 135, 135M, 200 IM series when used with Zeiss Standard trinocular tube (45 29 02)

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display