Benchmark H1000-MR-3000 MAGic Clamp magnetic clamp, 3000ml Erlenmeyer

Axon Instruments Axopatch 200B Integrating Patch Clamp Amplifier Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to conduct further testing at our facility.

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Lot of 29 Hollow Cathode Lamps - Perkin Elmer - Unicam - S&J Juniper Lab These were removed from (more) a university lab where they were surplus to requirements. The units have not been tested but have been used previously. Included are; 1 x Perkin-Elmer Hollow Cathode Lamp - Element: K-Na1 x Cobalt Hollow Cathode Lamp - Element: IRON.Fe.1 x Pye Unicam Hollow Cathode Lamp - Element: D21 x Activion Hollow Cathode Lamp - Element: Palladium Pd1 x Unicam Hollow Cathode Lamp - Element: Pb1 x Unicam Hollow Cathode Lamp - Element: Zn1 x Unicam Hollow Cathode Lamp - Element: Fe1 x Unicam Hollow Cathode Lamp - Element: Cu1 x Unicam Hollow Cathode Lamp - Element: Ni1 x Unicam Hollow Cathode Lamp - Element: B1 x Unicam Hollow Cathode Lamp - Element: Mn1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: VANADIUM V Wavelength: 318.51 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: COPPER Cu Wavelength: 324.81 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: CADMIUM Cd Wavelength: 228.81 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: ALUMINIUM AL. Wavelength: 396.2/309.31 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: PALLADIUM.Pd. Wavelength: 247.6 nm2 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: LEAD.Pb. Wavelength: 217.0 nm1 x  S&J JUNIPER & CO Hollow Cathode Lamp - Element: ZIRCONIUM.2r. Wavelength: 360.1 nm1 x  S&J JUNIPER & CO Hollow Cathode Lamp - Element: PLATINUM Pt. Wavelength: 265.91 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: CALCIUM.Ca. Wavelength: 422.71 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TITANIUM Ti. Wavelength: 364.3 nm1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: SILVER Ag Wavelength: 328.11 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: MAGANESE.Mn. Wavelength: 279.5 nm.1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TELLURIUM Te. Wavelength: 214.31 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: RHODIUM.Rh. Wavelength: 343.5 nm.1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: ZINC Zn Wavelength: 213.91 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: Na/K. Wavelength: 589.0/766.51 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TUNGSTEN W Wavelength: 255.1

Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps GENIE Temp-Shaker 300 with Un (more)iversal Ratcheting Clamps provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 305 x 305mm (12 x 12in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE

Labconco Ampule Pod, with (15) 1/4" ID tubing ports, 15 plugs, 2 clamps and (1) 7547200 Adapter Allo (more)ws for simultaneous freeze drying of up to 15 ampules Polypropylene base has (15) 1/4 in. ID tubing ports each with silicone tubing for attachment of ampules Includes 15 plugs, 2 each clamps and 1 straight stainless steel adapter Adapter attaches to a single valve port on freeze dryer Ampules not included INCLUDED: The Labconco Ampule Pod, with (15) 1/4" ID tubing ports, 15 plugs, 2 clamps and (1) 7547200 Adapter includes: - Plugs x 15 - Clamps x 2 - 7547200 Stainless Steel Adapter - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

JLA-10.500. Fixed-Angle Rotor, Aluminum. Includes 6 Biosafety Liquid Canisters with secondary liquid (more) closures. Major applications: Large-volume for initial processing of bacteria or other cells from fermentors, clearing cell debris from homogenates, or pelleting subcellular organelles and protein precipitates. For use in Avanti J Series and J2 Series centrifuges (except J-21 series). Maximum speed: 10000 rpm Max g-Force: 18600 k-Factor: 2850 Nominal Capacity: 3000 mL

Closed, rectangular tunnel equipped with integrated electronic system. To be installed on band conve (more)yors. Industry: - Food; - Cosmetic; - Chemical and pharmaceutical; - Others. Use: - Quality control; - Customer protection; - Machine protection. Main advantages: - Compact look; - Easy and comfortable to use menu; - Touch panel. Optional equipment: • Test cards - ball (balls) melted in plastic, used for sensitivity checking (numerous types and diameters – with certificates, if needed); • Signalling device – sound and light signals; • Printer: - with RS 232 port (maximal cable length 100 meters); - with RS 485 port (maximal cable length 1200 meters); • Integrated IT solutions: - mesuset (detector operation via laptop); - mesunet (web integration and remote operating); - others; • Voltage control system: - magnetic stabilizer; - electronic stabilizer; • Remote deleting switch-key; • Transmission and mechanical separation systems solutions; • Recoil system: - lateral actuator system; - trigger flap system; - tape stranding device; - others; • Markers: - pressure paint nozzle marking system; - sack marker; - others; • Belt conveyor flight operating: -“maneuverable” belt conveyor flight; - others.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.