Heraeus Nobelight D2 Deuterium Lamp Deuteriumlampe DO 405J Shimadzu UV 120-3100

set of 6 stainless steel pliers / clamps for stirring platform - 300 ml Erlenmeyer For orbital/recip (more)rocating laboratory shaker New equipment in its original packaging

Job Lot of 34 Hollow Cathode Lamps This was removed from a university lab where it was surplus to re (more)quirements. These have all been tested by a manufacturer trained engineer using a Varian SpectrAA Atomic Absorption Spectrometer  Model - 220FS)) and these are the results for that (no further test have been done): Photron Hollow Cathode Lamp - Element: Na, Sodium (PN-P852) SN-4589.  Working Visimax I Hollow Cathode Lamp - Element: Zn (Cat no-62311). WorkingVisimax I Hollow Cathode Lamp - Element: Yb (Cat no-062983-00). Working Instrument Laboratory Hollow Cathode Lamp - Element: Chromium Cr. (Cat no-89211). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Cobalt, Co (Cat no-89212).   WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Selenium, Se (Cat no-89249). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-89230). not WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Maganese, Mn (Cat no-89231). Working Philips Data Coded Hollow Cathode Lamp - Element: Sn (PN-9423 390 30501) SN - 37957.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Ca-Mg (PN-9423 393 31011) SN - 38083.   Not testedPhilips Data Coded Hollow Cathode Lamp - Element: Hg (PN-9423 390 30801) SN - 37374.    WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Na (PN-9423 390 30111) SN - 28829.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Pb (PN-9423 390 30821) SN - 37759.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Cd (PN-9423 390 30481) SN - 37280.   WorkingPhilips Data Coded Hollow Cathode Lamp - Element: D2 (PN-9423 390 30011) SN - 35732.   not tested Activon Hollow Cathode Lamp - Element: Calcium, Ca (SN-27775).       not WorkingActivon Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-6603).  WorkingActivon Hollow Cathode Lamp - Element: Titanium, Ti (SN-5998).  not tested Cathodeon Hollow Cathode Lamp - Element: Cr (PN-3UNX/Cr) SN - 39998.  WorkingCathodeon Hollow Cathode Lamp - Element: Ca (PN-3UNX/Ca) SN - 70591.  WorkingCathodeon Hollow Cathode Lamp - Element: Fe (PN-3QNY/Fe) SN - 40895.  Working SIP Analytical Hollow Cathode Lamp - Element: Cd (Cat no-FL2176) Lamp no.20065 NOT WORKINGSIP Analytical Hollow Cathode Lamp - Element: Pb (Cat no-FL2172) Lamp no.20008 WorkingSIP Analytical Hollow Cathode Lamp - Element: Ni (Cat no-FL2155) Lamp no.20081.  WorkingSIP Analytical Hollow Cathode Lamp - Element: H2 (Cat no-FL2159) Lamp no.20098. not tested S&J Juniper Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-4132) SN-517009. WorkingS&J Juniper Hollow Cathode Lamp - Element: Boron, B (SN-88541).   WorkingS&J Juniper Hollow Cathode Lamp - Element: Cadium, Cd (Cat no-4108) SN-514357.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Lead, Pb (Cat no-4129V) SN-2936V. WorkingS&J Juniper Hollow Cathode Lamp - Element: Aluminium (SN-88765).  WorkingS&J Juniper Hollow Cathode Lamp - Element: Copper, Cu (Cat no-4114V) SN-3325.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Cu/Zn (Cat no-4289V) SN-3144V.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (Cat no-4135) SN-513155.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-88612).  Working

Yamato WC-301UVB Auto Pure Benchtop Type 1 Water Purification System with UV Oxidation Lamp, 120V Co (more)nfiguration Benchtop Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V with UV oxidation lamp that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WC-301UVB Auto Pure Benchtop Type 1 Water Purification System with UV Oxidation Lamp, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark H1000-MR-CMB MAGic Clamp COMBO, for 125ml, 250ml, 500ml flasks Benchmark Scientific MAGic  (more)Clamp COMBO, for 125ml, 250ml, 500ml flasksClick Here to View Product Video INCLUDED: The Benchmark BactiZapper Infrared MicroSterilizer includes: - 1 Year Manufacturer's Warranty

The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetti (more)ng system, and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin-column kits.  The QIAcube is preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded free of charge. In addition, customized protocols tailored to meet your specific application demands can also be requested.  The QIAcube is highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as: Sequencing/sequencing analysis Gene expression analysis Genotyping Proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (noncondensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28°C Pipetting system: Syringe size 1 ml, pipetting range 5-900 µl Samples per run: 1–12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range of room temperature to 70°C, ramp-up time of <5 min from room temperature to 55°C (± 3°C) Software: QIAGEN protocols are preinstalled on the QIAcube or can be downloaded at www.qiagen.com/MyQIAcube Weight: 70.5 kg

This Perkin Elmer Fluorescence Spectrometer&nbsp;Model - LS 45 was removed from a university lab whe (more)re it was surplus to requirements. The system has been serviced and recertified and is in full working order. We have a full report available on request. There is no software included It is in excellent cosmetic condition and is supplied with the following; 1 x LS50B S/W Upgrade to LS 55 Issue B - some items are missing.1 x Box labelled L225-8000

Stirring rod with propeller ideal for very low/medium viscosity range at medium/high speed range. Co (more)mpatible for use with ES, LS, DLS, LH, DLH, PW, OHS series pole stirrers. It is a standard stirring rod which generates an axial flow in the container with the suction of the substance from the bottom upwards. All VELP stirring rods are made of stainless steel. When choosing the correct stirring rod it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

HX7 H scale&rsquo;s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today &ndash; that&rsquo;s the multifunctionality. That&rsquo;s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices &ndash; thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7&rsquo;s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Crest P230HT-45 Digital Ultrasonic CleanerFeatures - Ceramically enhanced transducer technology with (more) industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P230HT-45 Digital Ultrasonic Cleaner is an efficient and versatile cleaning device, featuring ceramically enhanced transducer technology with industrial bonded assembly for superior performance. Operating at a frequency of 45 kHz, it ensures a homogenous sound field and even energy distribution through frequency sweeping, preventing standing waves. The cleaner has a tank capacity of 0.75 gallons (2.8 liters) with dimensions of 9.5 x 5.25 x 4 inches (237 x 134 x 100 cm) and an overall size of 11.5 x 6.37 x 9.25 inches (265 x 162 x 295 cm). It offers an adjustable bath temperature between 20°C and 80°C, with an average ultrasonic power of 80 watts. The digital heater can be set from 0 to 99 minutes or for continuous operation, reaching temperatures up to 175°F (80°C). The deep-drawn stainless steel tank with rounded corners allows for easy cleaning, and the intrinsically safe heater includes dry-run protection, ensuring safe and reliable use. INCLUDED: The Crest P230HT-45 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty