Buchi GKR-50 Glass Tube Drying Oven Lab

This Buchi GKR-50 Glass Tube Drying Oven was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and has been tested with a digital thermometer (not included). We set the temperature to around 37˚c on the dial and the thermometer went up to 35˚c. We then turned it up to 100˚c, and the thermometer read 80˚c, finally, we turned it up to 200˚c and the thermometer reached 167˚c. It is in reasonably poor cosmetic condition and has lots of marks from use as well as rust.

Yamato DX-602C Natural Convection Oven 153L, 115V Temperature Range Ambient +5°C to 280°C Temperatu (more)re Distribution Accuracy ± 10°C at 280°C Chamber Volume 153L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-602C Natural Convection Oven 153L, 115V is designed for both economy and efficiency. It features a digital PID controller for straightforward operation, including options like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 280°C, maintaining a temperature control accuracy of ±1°C and distribution accuracy of ±10°C at 280°C. It takes approximately 80 minutes to reach its maximum temperature from room temperature. This oven is built with a durable stainless-steel interior and an electro-galvanized steel sheet exterior finished with melamine resin, ensuring longevity and ease of maintenance. It's insulated with glass wool and utilizes a 1.36 kW iron-chrome wire heater. Equipped with two 33 mm exhaust ports on the top, it offers microprocessor controlled PID temperature management with digital setting and LED display options, alongside a versatile timer range. Safety is a priority, with features including self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 600x510x500mm, and the external dimensions are 700x640x830mm. The oven can support a shelf plate load of 15kg and features 12 shelf rest steps with a 35mm pitch. The Yamato DX-602C is an ideal solution for those in need of a large, reliable, and user-friendly convection oven for various applications. INCLUDED: The Yamato DX-602C Natural Convection Oven 153L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF30 Forced Circulation Oven 32L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Internal volume of 32 L (1.13 cu.ft.) for flexible applications - Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF30 Forced Circulation Oven 32L, 115V is engineered for precise temperature control and uniform heat distribution, making it ideal for a wide range of laboratory and industrial applications. This model offers a spacious 32L (1.13 cu.ft.) capacity and operates within a setting temperature range from +20 to +300°C, accommodating diverse heating requirements. Its advanced ControlCOCKPIT system features an adaptive digital PID-microprocessor controller with a high-definition TFT-color display, allowing intuitive programming and monitoring. The oven includes a Pt100 temperature sensor in a 4-wire circuit, ensuring consistent readings and effective mutual monitoring. To further enhance accuracy, the adjustable parameters cover Celsius or Fahrenheit temperature settings, air flap position, program time, and even time zones, supported by SetpointWAIT technology, which starts the process time only once the set temperature is achieved. Built with durability and hygiene in mind, this unit features a fully insulated stainless steel door with inner glass, providing secure two-point locking to maintain a stable environment. The oven's stainless steel interior is not only easy to clean but reinforced with deep drawn ribbing and protected large-area heating on all four sides for reliable performance. An integrated auto-diagnostic system aids in fault analysis, and the adjustable overtemperature monitor and mechanical limiter add layers of safety to its operation. The unit comes with a works calibration certificate for +160°C, validating its performance standards. Designed with a user-friendly AtmoCONTROL software for data logging and programming, the Memmert UF30 Oven is an all-encompassing solution for precise and reliable heating tasks. INCLUDED: TheMemmert UF30 Forced Circulation Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 240200 RapidFISH Slide Hybridization Oven, 115V The Boekel Scientific 240200 Rapid (more)FISHSlide Hybridization Oven was designed to simplify Fluorescent In-SituHybridization (FISH) procedures for FFPE (formalin fixed paraffin embeddedtissue) samples, cell suspensions, and other tissue preparation procedures.Temperature control and humidity are essential for FISH probes to bind to RNAand DNA. The RapidFISH has a self-clamping slide tray design that maintains therequired humidity. Microscope slides in the RapidFISH do not require coverslipsto be glued because the removable tray of the slide incubator traps moisture inthe system. Elimination of this step decreases processing time and ensures thatthe specimens stay hydrated during processing. The system has an easy to usecontrol system for controlling temperature, time and controlled temperaturesteps. The device has a small footprint and still maintains excellenttemperature stability and uniformity because of its dual heater convectionsystem. FISH testing is used worldwide to identify biological markers in theform of DNA/RNA. Self-clamping slide tray, ideal for hybridization No coverslip glue necessary Dual heater convection system for excellent temperature control Process up to twenty (20) 3”x 1” glass microscope slides Includes slide tray and metal slide holder Easy to use control system Includes RapidFISH Slide Hybridizer, Slide Tray, Slide Holder ApplicationHighlights Histology, Pathology, FFPE sample storage, Cancer Research, Cancer Diagnosis,Genetic Research, Genetic Diagnosis Click Here to View Product Video INCLUDED: The Boekel Scientific 240200 RapidFISH Slide Hybridization Oven, 115V includes: - RapidFISH Slide Hybridizer, Slide Tray, Slide Holder - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Packard Biochip Technologies ScanArray Lite Micro Array This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has not been tested further. The lab confirmed it was working prior to removal. It is in great cosmetic condition with only minor marks. The power lead is included.