Yamato DX-602C Natural Convection Oven 153L, 115V

Carbolite GLM 1 Muffle Furnace This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order (Max temp 1200˚C). It is in reasonably good cosmetic condition with minor marks.

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF260plus Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambi (more)ent up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 256 L (9.04 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF260plus Forced Circulation Oven 256L, 115V provides a large working chamber with a capacity of 256L (9.04 cu.ft.), making it ideal for a wide range of applications that require precise thermal processing. With a working temperature range from 10°C above ambient up to +300°C, and high-resolution displays for monitoring, this oven ensures accuracy and flexibility in temperature settings. Equipped with the advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays and a multifunctional PID-microprocessor controller, users can easily control parameters such as fan speed, air flap position, and program time. The Function SetpointWAIT ensures that the process only begins once the desired temperature is reached, enhancing operational efficiency. Safety is a top priority in the UF260plus, with features like an overtemperature monitor (TWW), adjustable temperature limiter (TWB), and a mechanical temperature limiter (TB), all designed to prevent overheating. The AutoSAFETY system includes integrated over- and undertemperature monitoring "ASF," which adjusts automatically and provides alarms in case of temperature deviations. This oven's stainless steel interior, reinforced with deep-drawn ribbing and integrated heating on four sides, ensures even heat distribution and easy cleaning. Advanced AtmoCONTROL software allows for seamless programming and data management via USB or Ethernet, making the UF260plus an excellent choice for professionals requiring reliability and precision in thermal processing. INCLUDED: TheMemmert UF260plus Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN55plus Natural Convection Oven 53L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 53L Features - 53-liter chamber volume accommodates various sample sizes, enhancing lab versatility - Precise temperature control from +5°C above ambient to 300°C for sensitive applications - Ergonomic PID controller with high-definition TFT display for intuitive adjustments - Durable stainless steel interior and exterior, corrosion-resistant for rigorous use - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with adjustable air flap for temperature uniformity - Adaptive settings include programmable temperature, timer, and setpoint wait for workflow optimization - AtmoCONTROL software for data logging and remote monitoring via Ethernet - Easy-to-clean stainless steel interior with reinforced ribbing, ideal for frequent use The Memmert UN55plus Natural Convection Oven 53L, 115V offers exceptional precision and control for a wide range of laboratory applications. With a working temperature range from +20°C to +300°C, this oven ensures stable and uniform heating, ideal for sensitive sample preparation and material testing. Equipped with TwinDISPLAY, a state-of-the-art dual high-definition TFT-color display, the oven provides intuitive control of temperature, time, and air flap settings. The natural convection system guarantees gentle airflow and uniform heat distribution, making it perfect for delicate samples that require a stable environment. The oven’s interior, crafted from easy-to-clean stainless steel, is reinforced with deep ribbing for durability and even heat distribution. Safety and efficiency are core features of the Memmert UN55plus. It comes with 2 Pt100 sensors for precise temperature monitoring and dual overtemperature protection through an integrated mechanical and electronic system. The oven's AutoSAFETY feature adjusts the heating performance to maintain accuracy, while its SetpointWAIT function ensures that processes only begin once the desired temperature is achieved. Additionally, its programmable digital timer, with adjustable settings ranging from 1 minute to 99 days, offers workflow flexibility. With a 53L capacity, robust design, and advanced programming options, this oven is a reliable choice for laboratories focused on consistent, safe, and high-quality results.INCLUDED: TheMemmert UN55plus Natural Convection Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 108 L (3.8 cu. ft.) Features - Internal volume of 108 L (3.8 cu. ft.) - Temperature range from +20°C to +80°C, with working range at least 5°C above ambient - Precise temperature accuracy of 0.1 °C using dual Pt100 sensors - Control panel includes TwinDISPLAY with two high-definition TFT-color displays - Programmable with AtmoCONTROL software via USB or Ethernet interface - AutoSAFETY system with integrated over- and under-temperature monitor and alarm - Easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing and large-area heating on four sides - Maximum chamber load of 386 lbs. (175 kg) with five shelves The Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V is crafted for precision in heating and reliability, ideal for laboratories requiring consistent temperature control for paraffin-based applications. With a spacious 108 L (3.8 cu. ft.) capacity, this oven provides ample room for versatile lab applications. Its advanced natural convection system delivers even heat distribution within a temperature range of +20°C to +80°C, and the dual Pt100 sensors in a 4-wire circuit offer an impressive 0.1°C temperature accuracy, ensuring reliable sample integrity and uniform heating across the chamber. This oven features Memmert's TwinDISPLAY control panel, equipped with two high-definition TFT color displays that allow users to easily monitor and adjust settings. AtmoCONTROL software provides additional functionality, enabling precise programming, management, and data transfer via USB or Ethernet. Integrated safety functions include AutoSAFETY, with over- and under-temperature monitoring, and visual and acoustic alarms, offering reliable performance and protection. The oven’s nearly gas-tight, stainless steel interior is reinforced and easy to clean, making it an efficient, durable choice for labs focused on maintaining high standards of accuracy and safety. INCLUDED: TheMemmert UN110PA Natural Convection Paraffin Oven 108L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN260 Natural Convection Oven 256L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) stainless steel chamber for diverse sample sizes - Temperature range from +5°C above ambient to +300°C for various applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature control - SingleDISPLAY digital PID-microprocessor with high-definition TFT color display - Natural convection system provides uniform heating throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air - Supports up to 9 stainless steel grids, with a max load of 263 lbs - Auto diagnostic system and overtemperature monitor for enhanced safety The Memmert UN260 Natural Convection Oven 256L, 115V offers versatile laboratory heating with a spacious 256 L (9 cu.ft.) stainless steel chamber, ideal for a range of sample sizes. Its temperature range from +5°C above ambient to 300°C and precise control, enabled by a Pt100 sensor DIN class A in a 4-wire circuit, ensure optimal accuracy. Equipped with a SingleDISPLAY digital PID-microprocessor and high-definition TFT color display, this oven makes temperature adjustments intuitive and precise. The natural convection system promotes uniform heating, and the electronically adjustable air flap allows controlled pre-heated fresh air intake. Built to support up to 9 stainless steel grids with a maximum load of 263 lbs, the UN260 also includes an auto diagnostic system and overtemperature monitor for safe, reliable operation in demanding environments. INCLUDED: The Memmert UN260 Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. MODELS AVAILABLE InCal= internal calibration. ExCal= external calibration *CE approved models STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

Labtech LT-4000 Microplate Reader This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks.

This was removed from a laboratory where it was surplus to requirements. The system powers up and is (more) in reasonably good cosmetic condition with marks from use, though there is a plate/tray missing from the front of the XT-2000i Included are; 1 x Sysmex XT-2000i Automated Hematology Analyzer 1 x Pneumatic Unit Model - PU-17 Software discs:-Sysmex XT-2000iV Version 00-10Sysmex SUIT Software Version 2.4.0.0 + USB Back up toolSysmex Recovery DVD-ROM XE XT XS IPU DC8000Sysmex Sybase iAnywhere 5.5.04Sysmex XT-2000i System Program Type 3XT21 Ver. 15979 (Floppy disk)

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

F1 Mass Standard - knob weights, wooden box. Nominal value - 100 kg.