Easily list your scientific equipment
Top suppliers for laboratory & industry
New and used instruments
Memmert UF30 Forced Circulation Oven 32L, 115V
Description from the supplier
- Internal volume of 32 L (1.13 cu.ft.) for flexible applications
- Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C
- Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
- Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture
- Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety
- Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides
- AtmoCONTROL software for managing and transferring data via USB or Ethernet interface
- Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days
- Fully insulated stainless steel doors with 2-point locking and inner glass doors
The Memmert UF30 Forced Circulation Oven 32L, 115V is engineered for precise temperature control and uniform heat distribution, making it ideal for a wide range of laboratory and industrial applications. This model offers a spacious 32L (1.13 cu.ft.) capacity and operates within a setting temperature range from +20 to +300°C, accommodating diverse heating requirements. Its advanced ControlCOCKPIT system features an adaptive digital PID-microprocessor controller with a high-definition TFT-color display, allowing intuitive programming and monitoring. The oven includes a Pt100 temperature sensor in a 4-wire circuit, ensuring consistent readings and effective mutual monitoring. To further enhance accuracy, the adjustable parameters cover Celsius or Fahrenheit temperature settings, air flap position, program time, and even time zones, supported by SetpointWAIT technology, which starts the process time only once the set temperature is achieved.
Built with durability and hygiene in mind, this unit features a fully insulated stainless steel door with inner glass, providing secure two-point locking to maintain a stable environment. The oven's stainless steel interior is not only easy to clean but reinforced with deep drawn ribbing and protected large-area heating on all four sides for reliable performance. An integrated auto-diagnostic system aids in fault analysis, and the adjustable overtemperature monitor and mechanical limiter add layers of safety to its operation. The unit comes with a works calibration certificate for +160°C, validating its performance standards. Designed with a user-friendly AtmoCONTROL software for data logging and programming, the Memmert UF30 Oven is an all-encompassing solution for precise and reliable heating tasks.
- 1 Stainless Steel Grid
- Tilt Protection Wall Bracket
- Calibration Certificate
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 3 Year Manufacturer's Warranty
Product details
| Setting Temperature Range | +20 to +300°C |
| Working Temperature Range | Min. 10°C above ambient up to +300°C |
| Volume | 32 L (1.13 cu.ft.) |
| Setting Resolution (temperature) | 0.1°C up to 99.9°C, 0.5°C from 100°C and actual values 0.1°C (LED) |
| Temperature Sensor | 1 Pt100 sensor DIN class A in 4-wire-circuit |
| Control Panel | ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function SetpointWAIT | The process time does not start until the set temperature is reached |
| Calibration | Three freely selectable temperature values |
| Adjustable Parameters | Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time |
| Fan | Forced air circulation by quiet air turbine, adjustable in 10 % steps |
| Fresh Air | Adjustment of pre-heated fresh air admixture by air flap control in 10 % steps |
| Vent | Vent connection with restrictor flap |
| Data Logging | AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port |
| Temperature Control | Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
| Door | Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors |
| Works Calibration Certificate | Includes works calibration certificate for +160°C |
| Interior | Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides |
| Max. Number of Shelves | 3 |
| Max. Loading of Chamber | 132 lbs |
| Max. Loading per Shelf | 44 lbs |
| Interior Dimensions (WxHxD) | 15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm) |
| Exterior Dimensions (WxHxD) | 23” x 27.8” x 17.1” (58.4 x 70.5 x 43.4 cm) |
| Net Weight | Approx. 100 lbs |
| Electrical Data | 115 V, 50/60 Hz, approx. 1600 W |
QuestPair is a platform to find and acquire laboratory equipment by connecting research organisations, universities, and companies with high-quality, affordable instruments. The platform facilitates multiple sales daily worldwide and works with partners around the globe to provide trusted, vetted products for a wide variety of scientific needs. Our in-house developed AI algorithms collect data on the usage and availability of scientific instruments, enabling us to provide tailor-made assistance in sourcing suitable laboratory equipment. With a focus on cost-effectiveness and sustainability, QuestPair has an excellent track record in streamlining acquisitions for laboratories to further scientific research and development.
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.