Eppendorf S-4-104 Adapter 20x 9mL Round Bottom Tubes Rundbodengefäße 5825743008

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lot of Thermo Scientific Rotor Bucket Adapters & Lids All items look to be new and unused, but a (more) lot of the packaging has been opened so we cannot confirm this. We removed the packaging for the photos. Included are the following: Thermo Scientific TX-750 Round Bucket Adapters x 2Part#: 75003638 Thermo Scientific Adapters for T-25 Nunc Easy Flask x 2Part#: 75008384 Thermo Scientific Adapters for T-75 Nunc Easy Flask x 2Part#: 75008383 Thermo Scientific Centrifuge Rotor Bucket Adapters 21x15mL x 4Part#: 75003719 Thermo Scientific TX-750 Swinging Bucket Rotor Lid x 2Part#: 75003609 Thermo Scientific Carriers for microplates and T-75 Flasks for TX-750 rotor x 4Part#: 75003617

This Beckman Coulter SW 32 Ti Swinging Bucket Rotor was removed from a university lab where it was s (more)urplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 6 x 100ml Max RPM: 32,000

Eppendorf A-2-DWP-AT Microplate Rotor & Buckets The Eppendorf A-2-DWP-AT Microplate Rotor &  (more)Buckets features two deepwell-plate buckets, which can each hold up to two plates for simultaneous processing of up to 192 samples. Reaches speeds of 4,500 RPM with a max RCF of 3,486 x g. This rotor can accommodate MTP, DWP, or filtration plate kits. The A-2-DWP-AT can only be used with Eppendorf centrifuge models 5810, or 5810R. INCLUDED: The Eppendorf Swing Bucket A-4-38 Rotor includes: - 2 Deep Well Plate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP-AT Microplate Rotor & Buckets SpecificationsMax Rotational Speed4,500 rpmMax RCF3,486 x gMax Capacity2 x 6 MTP; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5810, and 5810R

Rednal Pneumatics UK Welded Pressure Vessel - 87/404 EEC This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27384 Box of Small Mixed Glassware ITEM-30071 Mixed lab glassware ITEM-30073 Mixed lab glassITEM-30072 Mixed nutritional science toolsITEM-30082 Miscellaneous lab toolsITEM-30076 IBM Pro PrinterITEM-30067 DJM. Cryo Research LCO2/LN2ITEM-30080 Isometric transducerITEM-30084 Sony Video Graphic Printer ITEM-30069 Glass tubes ITEM-30070 Glass tubes (bagged) ITEM-30059 50ml vol flasks ITEM-30065 Fisher Scientific Power 608ITEM-30079 500 VA isolating transformer ITEM-30056 Hoefer DC Power Supply PS 3000 ITEM-26105 Magnetic Stirrer Hotplate ITEM-30068 Mixed lab glassITEM-30050 Lab glasswareITEM-30049 Seperating funnelsITEM-30066 Bio Rad Model 200/2.0 Power SupplyITEM-30053 Grant BT1-E ITEM-30055 Microcomputer Electrophoresis Power Supply ITEM-30054 Instech Automated Blood Sampler ITEM-30083 Polar Vantage Heart Rate Monitor ITEM-30074 Mixed glass filters ITEM-30048 Unknown Plastic Item ITEM-30062 Sample Holder RackITEM-30063 Sample Holder Rack ITEM-30064 Sample Holder Rack ITEM-30061 ZipPette 30mlITEM-30060 Amersham Bioscience columnITEM-30057 Miscellaneous wires/cables ITEM-30058 Omni TH220P ITEM-30052 Amersham Pharmacia Biotech Column C 16/40 ITEM-30051 Waring Commercial Blender ITEM-30075 Wacom Intuos Pen TabletITEM-30045 MWG AG Biotech Primus 96+ ITEM-30047 Centrifuge Rotors ITEM-30046 Listing PaperITEM-28319 Micro Techniques magnetic apparatus ITEM-27661 Magnifying Glass ITEM-25679 Varian Oil Mist Eliminator ITEM-27663 Norgren Pressure GaugeITEM-25694 2x Boxes of Columbia INT Ribbon Type BO OMEF 9 ITEM-25705 Denley Aluminium Tray ITEM-27381 Tube of glassware ITEM-28322 VT Video Monitor ITEM-28301 FisherBrand Shaker Flask Clamps, mixed sizes ITEM-26085 Photochemical Reactor ITEM-26091 Freezer rackingITEM-26092 DNA Engine Tetrad ITEM-26065 Sony AC Adaptor/Charger AC0V700ITEM-26024 Kramer Tools VP-211DS Automatic VGA/Audio SwitcherITEM-26016 iOmega Zip 250ITEM-30041 Unbranded Microscope ITEM-30031 Philip Harris MicroscopeITEM-30043 Unbranded Microscope ITEM-30034 Harding Scientific Microscope ITEM-28324 Seca Scale ITEM-28306 Conical Flasks ITEM-28325 Hybaid Microgel-PSU equipment ITEM-28323 Miscellaneous toolsITEM-28307 Leading Edge® PC Laptop & PSU ITEM-30032 Harding Scientific Microscope

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 5 g.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Eppendorf F-45-72-8 Rotor for Vacufuge Plus The Eppendorf F-45-72-8 is a fixed angle rotor. This ro (more)tor can accommodate 72 x 0.5 mL (8 x 31mm) tubes and is for use with the Eppendorf Vacufuge Plus. INCLUDED: The Eppendorf F-45-72-8 Rotor includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-72-8 Rotor SpecificationsRotor TypeFixed angle, non-aerosol-tightCapacity72 x 0.5 mL (8 x 31 mm)

Benchmark BioClave 28 Research Autoclave, 28 liter, 120V Despite the space-saving exterior dimensio (more)ns of the Bioclaves, the stainless steel chambers are surprisingly large, accommodating a variety of liquids, media, instruments, glassware, plasticware and other common research laboratory items. Available in 8L, 18L and 28L chamber volumes, these benchtop models include a mechanical and electrical safety interlock that prevents the door from being opened until the pressure has reached zero PSI.With a large digital LCD display and fully automatic operation, all segments of the cycle (fill, sterilize, exhaust and dry) commence and run to completion by simply pressing the start button. An optional thermal mini-printer is also available for providing a record of sterilization parameters and a USB drive can be used to record settings and transfer them to a PC.The 8 liter BioClave Mini is preprogrammed to meet basic sterilization needs. Temperature can be selected at either 121°C or 134°C, and the sterilization time is fully adjustable. The economical BioClave Mini is the ideal choice wherever benchtop sterilization is required and space is limited. BioClave 18L and 28L Models offer preset cycle options (standard programs), for use with liquids, wrapped research instruments or unwrapped instruments/plasticware. An additional option “Dry Only” is also available for additional drying time to be added to the end of a cycle. For special applications, requiring variations in cycle parameters, all settings are fully adjustable. The Bioclave 28L features an increased chamber size with a diameter of 32cm. With this larger internal chamber, the BioClave 28 is our only model capable of sterilizing 1 and 2 liters flasks (and bottles). Despite the increased chamber size, the unit is still relatively compact, suitable for benchtop use.INCLUDED: The Benchmark BioClave 28 Research Autoclave, 28 liter, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty