BINDER BD-115 incubator / oven with natural convection 100°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

BINDER BD-115 incubator / oven with forced convection 100 ° C Model: BD115 ventilated Capacity: 115  (more)liters Temperature range: Room temperature plus 5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Year of manufacture: 2010 Tested at 37 ° C

Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 7.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 7.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V Temperature Range Ambient +5°C to (more) 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V is expertly designed for effective drying and storage of lab instruments. It operates in the temperature range of room temperature plus 5°C to 70°C, utilizing natural convection. Key features include a large observation window for monitoring, adjustable feet for stability on uneven surfaces, and a stainless-steel interior that's both easy to clean and corrosion resistant. The oven is equipped with a stainless-steel pipe heater (1.0kW) and a water receiving plate at the bottom. Temperature control is managed by a PID controller with a microprocessor, allowing precise settings via digital ▲/▼ keys. It includes a K thermocouple temperature sensor and liquid-expansion temperature controller for overheat protection. Safety and usability are enhanced with a silicon rubber-packed single door and a standard 3mm glass observation window measuring 250x300mm. The oven offers a shelf plate load capacity of 15kg and has 10 shelf rest steps with a 30mm pitch. Weighing approximately 45kg, its internal dimensions are 450×450×450 mm, and external dimensions are 504×562×788 mm. The DG-400C is an excellent choice for laboratories needing a reliable and efficient solution for drying glassware and other instruments. INCLUDED: The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37279 2x Bio-Rad model 3000XiITEM-37280 PTI Warp Drive MCS-3400ITEM-37283 LKB 2212 HeliracITEM-37284 Hanna HI 2211 pH/ORP MeterITEM-37285 Grant W6 Water BathITEM-37286 Chemlab model-N18ITEM-37287 Jenway 3505 pH MeterITEM-37288 Savant PS 250ITEM-37290 HaakeBuchler Polystatic PumpITEM-37292 Pharmacia Fine Chemicals Electrophoresis power supply eps 500/400ITEM-44595 Kern DE 300K/100N Weighing ScalesITEM-45226 16x Metal Freezer RackingITEM-45249 2x Boxes of Polysterine packagingITEM-45252 Proline Microchef Microwave ST44ITEM-45254 Stuart S150 Rolling IncubatorITEM-45403 Delta Sonic BathITEM-45404 Roto-Shake GenieITEM-45405 UVP Dual Intensity Ultraviolet TransilluminatorITEM-45406 kodak gbx-2 safelight filterITEM-45407 Thermo Fisher Scientific Clamp For Test Tube 4-1027-CMCITEM-45408 1XPT100 ProbeITEM-45409 Techne Tempette Junior TE-8J Heated Circulating Water BathITEM-45410 TOYO MS-I6B Mini StirrerITEM-45411 Ilford Darkroom Safelight Photo Processing LightITEM-45412 2 x Helis Bio BottlesITEM-45419 Olympus 10.4/ 4x SliderITEM-45420 5 x small centrifugal tube holdersITEM-45421 CAPP CRP-412X Lab Plate ShakerITEM-45425 Vacuubrand Membran-Vakuumpumpe ME2

Pure water requires a storage system to prevent the degradation of your water quality. Merck Millipo (more)re’s 30 liter polyethylene (PE) storage tank is designed to maintain consistent purity of stored water and provide effective protection against airborne contaminants.

Weighing capacity: 1500/3000/6200 g Readability (0 – 1500 g): 0.01 g Readability (1500 – 3000 g): 0. (more)02 g Readability (3000 – 6200 g): 0.05 g Repeatability (0 – 1500 g): ≤ ±0.01 g Repeatability (1500 – 3000 g): ≤ ±0.01 g Repeatability (3000 – 6200 g): ≤ ±0.03 g Linearity (0 – 1500 g):  ≤ ±0.02 g Linearity (1500 – 3000 g):  ≤ ±0.02 g Linearity (3000 – 6200 g):  ≤ ±0.05 g Response time (average): ≤ 1.5 s Weighing pan: 190 x 204 mm Dimensions (WxDxH): 213 x 342 x 88 mm Weight: 4.7 kg

The dishwasher of the brand Miele type G7836CD is ideal for cleaning and disinfecting a wirange of m (more)edical and laboratory products. In addition, this dishwasher comes with two dishwasher baskets. Technical specifications Voltage: 400V, 50Hz Power: 10.2kW External dimensions (W) x (D) x (H): 90 x 74 x 117 cm

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.