Defender 3000 Ohaus

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Additional WD-4/3 LCD display has been designed to connect with scales operated via PUE H315, MW-01- (more)Ax, PUE HX7, PUE HY10, PUE5 indicator. It is to be purchased with a scale in a set exclusively. The display is equipped with a stainless steel housing and a cable with 8-pin connector (IP67). Features: Automatic baud rate recognition Screen saver LCD backlight Power supply source: the terminal (scale)

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

VWR CompactStar CS4 Benchtop Centrifuge In excellent working condition Part number: Compact Star CS4 (more) Technical specifications: Voltage: 230V Frequency: 50 - 60 Hz Speed: 0 - 6500 rpm Dimensions (H x W x D): 230 x 210 x 190 mm Weight: approx. 23 kg max. rcf: 4000×g Timer: 0.5 to 30 minutes or continuous Weight: 4.75kg With fixed angle rotor Max. capacity: ×15 ml conical / 6×15 ml standard / 6×10 ml blood tube Year of manufacture: 2010

Sorvall Legend RT Centrifuge This system was removed from a university lab where it was surplus to r (more)equirements. The unit powers on, but it shows Error 21 when attempting to spin, causing the unit to cut out. The refrigeration system functions well, and the unit is in good cosmetic condition with minor marks. Due to the error, this item is listed as Spares/Repair. The unit is fitted with the following rotor: - Sorvall Rotor - P/N: 75006445 - S/N: 004061 Includes:- 4 x Sorvall Swinging Buckets - P/N: 75015679

Agilent 2100 Bioanalyzer System with Software & Accessories This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and passes all diagnostic tests when connected to the laptop. The unit does require a service as it has exceeded 1000 hours since the last one. The included software has the licences for 2100 Electrophoresis & 2100 Instrument control. The included IKA mixer is specific for the chips this system uses. Includes: -HP ProBook 6560b Laptop With Power Cable -Agilent Bayonet Electrode CartridgePart no- 5065-4413 -Agilent test Chip Kit (Expired on 11/5/14)Part no- G2938-68300 -Safe lock tubes -14 RNA Nano Chips (Expired on 3/5/13) -Electrode Cleaner -STD Accessory Kit Series C -All relevant guides, manuals and information booklets -Agilent 2100 Expert Software -Agilent Chip Priming Station With Syringes -Agilent IKA MS 3 VortexerModel- MS 3 B S36

Selecta DIGIT-COOL circulation ultrathermostat. Digital. Adjustable temperature from ambient to 100  (more)ºC. Stability ±0.01 °C. Pt100 sensor. Circulation pump 150 mbar. Adjustable flow rate up to 12 l/min. Safety thermostat and fluid level buoy. Selectable maximum and minimum alarm and working temperatures. (HWD): 450*210*510mm; 22 kg. Consumption: 1.4600 W. User manual. The DIGIT-COOL Selecta Circulation Ultrathermostat is high quality equipment designed to precisely control temperature in laboratory applications and industrial processes. With its easy-to-read digital display and intuitive controls, this thermostat ensures precise and stable temperature control, making it ideal for a wide range of applications. This ultrathermostat features efficient internal circulation that ensures uniform heat distribution, resulting in a homogeneous temperature throughout the system. Additionally, its compact and robust design makes it easy to install and operate, making it an excellent choice for laboratories and industrial plants. With a wide range of temperature settings and exceptional accuracy, the DIGIT-COOL Selecta Circulation Ultra Thermostat is a reliable and versatile tool for any work environment requiring precise temperature control. Its advanced technology and exceptional performance make it an ideal choice for applications requiring precise temperature control. The DIGIT-COOL immersion thermostat allows you to regulate the temperature of the liquid from 0ºC to 100ºC with a stability of 0.1ºC. The thermostats are equipped with: - Pt100 resistance thermometer temperature sensor. - Circulation pump with adjustable flow for agitation. - Cooling coil to regulate room temperature by connecting to mains water. - Safety thermostat and fluid level buoy. - Selectable upper and lower alarm temperature. - Selectable maximum and minimum working temperature. - Selectable reading correction. - RS232 connection. - Reading in degrees Fahrenheit or Celsius. Accessory not included with the possibility of supply: stainless steel bucket, lid with canopy or with reducing discs, frame and racks.

MAS.1 Y device is an electromagnetic weighing module of high resolution, equipped with Y touch panel (more) featuring 5.7" display. The device can be integrated into a weighing system of the customer. Solid construction and advanced electronics ensure great adaptability both when fitting the module into the technological line and building it into the customer device. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2×USB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY, 100-120V, 60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty