Radwag MAS.1.82/220.Y Weighing Module

Bartington MS2WF Magnetic Susceptibility System This system was removed from a university laboratory (more) where it was surplus to requirements. The units power on and are in good condition with minimal wear. The pumps function correctly, but an alarm sounds on the MS2WFP PSU. Additionally, the system is missing the MS2 meter and probe.Therefore, this system is listed as Spares/Repair. Specifications: - MS2WFP Power Supply Unit - Model: MS2WFP - Serial No.: 134 - MS2WF Furnace - Model: MS2WF - Serial No.: 134 - MS2W Sensor - Model: MS2W - Serial No.: 150

Grant Instruments BTA Dry Block Heating System for 24 tubes Easy and precise temperature setting Hea (more)ting range ambient + 5degC to 100degC, with rapid heat-up time Stability and uniformity +/- 0.1degC Capacity : 24 tubes of 15ml Compact, sturdy design

Termoreactor for analysis of COD Bioblock Scientific 1074. Capacity for 8 tubes of 16 mm diameter an (more)d 1 tube of 22 mm diameter. Operation to 100 or 145 ºC. Continuous operation or timer up to 120 min. Specifications: 230 V; 50 Hz; 270 W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)has not been tested further. It is in good cosmetic condition with minor marks from use. The system also includes: 1 x Logitech Wireless Keyboard & Mouse.8 x Used MiSeq Flow Cells in containers.1 x 96 Well Plate.1 x Spare FSE Fluidics Kit 15013841S.7 x HiSeq Flowcell Gaskets 15011631.1 x Ultra-Low Universal Lid.1 x Illumina GenomeStudio v1.7 Software disc.

Corepoint Scientific PRF122WWW-0A Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Fr (more)eezer Temperature Setpoint Range Refrigerator: 1°C to 10°C / Freezer: -15°C to -25°C Capacity Refrigerator: 10.5 cu. ft. / Freezer: 1.3 cu. ft. Defrost Method Refrigerator: Cycle / Freezer: Auto Features - Compact, space-saving design with freestanding refrigerator and auto defrost freezer combo - Separate microprocessor temperature controllers and digital displays for precise temperature management - Six adjustable refrigerator shelves and two adjustable freezer shelves with guard rails - Auto defrost cycle for the freezer every 6 hours for optimal temperature maintenance - Audible and visual high/low temperature alarms with remote alarm contacts - Keyed door locks, magnetic door gaskets, and integrated door handles for enhanced security - Environmentally friendly HFC-free refrigerant (R600a) and foam insulation - Stacking kit and leveling legs included for flexible placement and stability - Forced draft circulation in the refrigerator for consistent cooling The Corepoint Scientific PRF122WWW-0A Solid Door Laboratory Combo features a versatile 1°C to 10°C refrigerator and -15°C to -25°C auto defrost freezer in a compact, space-saving design. This freestanding unit has separate microprocessor temperature controllers and digital displays for precise temperature management. With a 12 cu. ft. capacity (10.5 cu. ft. refrigerator, 1.3 cu. ft. freezer), it includes six adjustable shelves in the refrigerator and two in the freezer, all equipped with guard rails to prevent items from being pushed against the back wall. The unit is equipped with audible and visual alarms, remote alarm contacts, and a sample-simulated temperature probe. The auto defrost cycle occurs every 6 hours, ensuring optimal temperature maintenance. Additional features include keyed door locks, magnetic door gaskets, integrated door handles, leveling legs, stacking kit, two probe access ports, and environmentally friendly HFC-free refrigerant (R600a). This combo unit maximizes facility floor space while reducing long-term maintenance costs. INCLUDED: The Corepoint Scientific PRF122WWW-0A Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - Keys for Door Locks - 6 x Adjustable Shelves for Refrigerator - 2 x Adjustable Shelves for Freezer - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Heidolph 036110235 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 135mm Plate Temperature Range (more) 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 135 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110235 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 135mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (135 mm diameter) - Pt1000 Temperature Sensor - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Used in Beckman Coulter J2, J6, and Avanti J Series Centrifuges Maximum speed: 10000 rpm Maximum sol (more)ution density: 1.2 g/mL Maximum allowable imbalance of opposing loads: 10 grams Capacity: 6x 500 mL Rotor material: aluminum Weight: 19 kg

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.