Edwards ELD500 DRY, 100-120V, 60Hz Helium Leak Detector

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting1 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ELD500 Max. Measurement <5x10-12 mbar ls-1 Inlet Connection NW25 Helium Pumping Speed 3.1 ls-1 Fe (more)atures - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY - 200-240V 50/60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 200-240V 50/60Hz EU Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector Max. Measurement <5x10-12 mbar ls-1 Inlet  (more)Connection NW25 Helium Pumping Speed 3.1 ls-1 Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.The ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Applied Biosystems/MDS SCIEX Pro ID Software V1.1 This was removed from a university lab where it w (more)as surplus to requirements. The item is in reasonable cosmetic condition. There are some minor marks on the disc. The case has some signs of wear. Also included are the following:1x Pro ID Software 1.1 Release Notes1x Validation Certificate, dated 05/01/2005

Picarro Cavity Ringdown Isotopic CO2 Spectrophotometer G1101-i & GSP-1000 PSU This was removed f (more)rom a university lab where it was surplus to requirements. This System includes;1x Picarro Cavity Ringdown Isotopic CO2 Spectrophotometer G1101-iMod No. ESP-1000 DASThe unit powers on and is in good cosmetic condition. 1 x Power Supply/PCMod No. ESP-1000The unit powers on, it communicates with the CO2 Spectrophotometer and is in good cosmetic condition. Accessories included1x Keyboard1x Mouse1x Communication cable We connected up a monitor (not included) and launched the program with success. The system was not tested further. The software is for Isotropic Carbon Dioxide Monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Edwards T-Station 300 Dry Turbo Station ISO100 mXDS3s, 115V Ultimate Pressure 6.000 × 10⁻⁸ Pumping  (more)Speed for H2 280 ls-1 Inlet Connection DN 63 ISO-K Features - Compact, powerful and reliable performance… wherever you need it - NOW also with the latest mXDS3s scroll pumps providing the best efficiency and best performance of the turbomolecular pump. - Push button vacuum stations ready to go - Designed to be used straight from the box our T-Station's do not require systemisation or complex configuration. - User servicable - The nEXT85 and nEXT300 turbomolecular pumps, mXDS3 dry scroll pump, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Inlet flange options - Available with either an NW40, ISO63 or CF63 for T-Station 85 and ISO100 and CF100 for T-Station 300 inlet flange to suit your application The Edwards Turbomolecular Pumping Stations are meticulously designed to provide a comprehensive and user-friendly vacuum solution, incorporating the latest technological advances for seamless installation and operation. These pumping stations are versatile, catering to a wide range of applications. Choose from a range of turbomolecular pumping stations, including the entry-level T-Station 85 and the higher capacity T-Station 300.Experience top-tier vacuum solutions with High Vacuum Pump Systems. Edwards offers cutting-edge technology and versatility to enhance your operations. Upgrade your vacuum system today and enjoy seamless performance in a variety of applications.The T-Station 300 builds on the existing popular T-Station 85 platform, by replacing the nEXT85H with the nEXT300 turbomolecular pump providing a solution for customers and applications that require a higher pumping speed up to 300 ls-1. Click Here to View Product Video INCLUDED: The Edwards T-Station 300 Dry Turbo Station ISO100 mXDS3s, 115V includes: - T-Station Pumping Station Base - Edwards mXDS3s Dry Scroll Pump - nEXT300 Turbomolecular Pump with ISO100 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson CPX1800H Digital Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wav (more)es and creates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer and continuous ultrasonic operation. - Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius. - Last stored parameters are recalled when unit is turned back on. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPXH heated ultrasonic baths are the most technologically advanced ultrasonic baths available. With programmable features, digital operation with power tracking capabilities to adjust for light or heavy loads, high/low power control, and degassing, the CPXH is the most versatile system available. The CPXH degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. Constant activity/power tracking automatically maintains the same ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Consult with your Branson representative about the Bransonic accessories and solution best suited for your application needs. The CPXH Series is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results – every time. When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing. When cleaning delicate parts, the CPXH allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPX1800H Digital Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty