Sorvall Legend RT Centrifuge w/ 4600rpm Swinging Arm Rotor Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This Beckman J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus  (more)to requirements. We have replaced the lid and repaired an area of cracked plastic underneath it. It is very stable. There are some cracks around the gas strut area. They do not appear to affect the operation of the unit. The unit is functional and has a comprehensive service history. The centrifuge holds a vacuum well and has been tested at: 5,000rpm10,000rpm15,000rpm20,000rpm (Max). It ran fine at all these speeds but the needle isn't totally in sync with the control knob. It has been tested at the following temperatures: 0ºC our thermometer read -15.8ºC20ºC our thermometer read 21.2ºC It appears to probably have a cooling issue. The compressor etc runs fine. It just appears to drop lower than it is set. When set to higher temps, it takes quite a while to heat up.

Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor Max. Speed 4,400 RPM Max. Capacity 4 x 100ml Max. (more) RCF 3,000 x g Features - Holds up to 4 x 100 ml samples for versatile lab applications - Temperature control range from -9°C to +40°C, suitable for temperature-sensitive samples - Compact design with a 20.7-inch height (lid open) for under-shelf placement - Quiet operation minimizes noise in lab environments - Timer range from 1 to 99 minutes with continuous run option - FastTemp for rapid pre-cooling and continuous cooling when idle - ECO switch-off activates after 8 hours of inactivity to conserve energy - Two program keys allow quick access to frequently used settings - Supports a maximum speed of 4,400 RPM and 3,000 x g (RCF) for efficient sample processing The Eppendorf 5702R centrifuge has a maximum speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. The Eppendorf 5702R Centrifuge 230V is new in the box INCLUDED: TheEppendorf 5702R Centrifuge 230V w/ A-4-38 Rotor Rotor includes: - A-4-38 Swing Bucket Rotor with Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40C

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

Eppendorf 5920R Refrigerated Centrifuge The Eppendorf 5920R Refrigerated Centrifuge is a large bench (more)top refrigerated centrifuge with exceptional performance and high capacity, making it a superior choice for high-throughput applications. The Eppendorf 5920R combines outstanding functionality with an advanced operating system. It has a menu-driven, multilingual operation menu with a large backlit display that allows the user to save up to 99 programs. The FastTemp Pro function is also featured, providing fast, automated pre-cooling using a pre-programmable time and date. The refrigeration system also utilizes Dynamic Compressor Control (DCC) technology for precise cooling performance. The Eppendorf 5920R Refrigerated Centrifuge has a wide variety of rotors, buckets, and adapters available to spin all commonly used tubes, bottles, and plates. With high centrifugation speeds of up to 13,700 RPM (21,194 x g), the 5920R is certainly capable of suiting a large multitude of different applications. This centrifuge also features automatic rotor recognition along with imbalance detection for maximum operational safety. Please Note: This centrifuge includes the S-4x1000 Swing Bucket Rotor and Round Buckets, not the buckets and adapters depicted in the photo above. The included rotor reaches a maximum speed of 3,700 RPM (3,428 x g). Click Here to View Product Video INCLUDED: The Eppendorf 5920R Refrigerated Centrifuge includes: - S-4x1000 Rotor and Round Buckets - 1 Set of 5x50ml Adapters, Cat # 5825732006, Set of 2 - 1 Set of 14x15ml Adapters, Cat # 5825734009, Set of 2 - Operator's Guide - Power Cord - Full One Year Parts and Labor Warranty Eppendorf 5920R Centrifuge SpecificationsMaximum Speed13,700 RPM (3,700 RPM with included rotor)Maximum RCF21,194 x g (3,428 x g with included rotor)Maximum Capacity4 x 1000ml (4 x 1000ml with included rotor)Temperature Range-11°C to 40°CTimer10 seconds to 99:59 hours, continuousDimensions (W x D x H)29.2 x 27.8 x 15.9 in (74 x 71 x 40 cm)Weight306 lb.Electrical Requirements120V, 50/60HzComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Benchmark LC-8 5000 Centrifuge Benchmark’s LC-8 series of laboratory centrifuges is uniquely designe (more)d to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning. The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode. To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. INCLUDED: The Benchmark LC-8 5000 Centrifuge includes: - 8 x 15ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Max. Speed: 13300 rpm Max. RCF: 17000 x g Includes: 24 x 1.5/2.0mL rotor with ClickSeal biocontainme (more)nt lid Run Time: 1 to 99 min. (1 min. increments); HOLD Dimensions (HxWxD): 230 x 240 x 350 mm Weight: 10.5 kg

Thermo Haake K10 circulating refrigerated bath. Temperature range from -10 to 100 ºC. Accuracy ± 0.0 (more)2 ºC. Capacity 3 L. Flow 12.5 L/min. PID temperature sensor. Overtemperature and low liquid level protection. Bath opening 13*10*15 cm; total dimension 19.5*36* cm. This Thermo Haake K10 circulating refrigerated bath is ideal for circulating liquids at constant temperature through external closed systems, such as rotary evaporators, photometers, refractometers, viscometers, polarimeters, and spectrophotometers, among others. Furthermore, this refrigerated bath can be used to keep samples at a constant temperature thanks to its electronic PID temperature sensor. Its handling is simple. The pump contains two speeds to reduce turbulence within the bath.

M1 Mass Standard - knob weights. Nominal value - 10 g.

Ohaus SHHSMPDG High Speed Microplate Shaker, 120V Speed Range 600 rpm to 2,500 rpm Maximum Capacity  (more)48 Microplates Orbit 3.6 mm Features - Sturdy, adjustable top plate secures up to 48 microplates, 6 deep well plates or small tubes less than 5 in. (12.7 cm) tall up to 7 lb. (3.2 kg). - For difficult to mix samples or to prevent overheating samples while shaking, the Pulse Feature can be adjusted to Pulse ON and Pulse OFF between 1 and 59 second intervals. - Independent LEDs and Touchpad Control for Speed and Time allow you to accurately reproduce the exact settings every time. High Speed Microplate Shaker provides variable high speed shaking from 600 to 2500 rpm formicroplates, deep well plates, and small diameter tubes up to 5 in. (12.7 cm) tall. Programmable pulse feature with adjustments for pulse ON and pulse OFF intervals of between 1 and 59 seconds. Program timer to count down from set time and turn off when timer reaches zero, or to run in continuous mode as timer counts accumulated time until user turns it off. INCLUDED: The Ohaus SHHSMPDG High Speed Microplate Shaker, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN840.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 34L/min  (more)(2.04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free - Self-drying system removes condensate without affecting the vacuum level The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables.

Capacity: 96 x 0.2 mL Max temperature: 100°C