Clifton Unstirred Water Bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

MEMMERT WNE 14 laboratory water bath Model: WNE 14 Temperature range: approx. 5 ° C above ambient te (more)mperature to +95 ° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 14 litres Internal dimensions (WxDxH): 350 x 140 x 290 mm External dimensions (WxDxH): 578 x 347 x 436 mm Mains: 230 V / 50 ... 60 Hz / 1800 W Weight: approx.: 16.0 kg Filling level at least 97 mm Filling level max. 120 mm Timer digital timer 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "hold time guarantee" Tested at 37°C and 70°C Alarm OK

IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator Working temperature Room Temp. to 100°C Capacit (more)y 18 L Temperature Stability DIN 12876 ±0.05 K Features - High-quality compact immersion circulator for efficient operation - PID temperature control for precise and reliable performance - LED displays for both working and safety temperature readings - Optical and acoustic warning functions for added safety - Adjustable safety circuit for secure temperature control - Sub-level protection ensures dependable operation - Lightweight design with compact dimensions for easy storage - Ready-to-connect packages simplify setup and use The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator is a high-quality, compact solution for achieving precise temperature control in laboratory environments. With advanced PID temperature control, it delivers stability to ±0.05 K, ensuring reliable performance across a working range from room temperature to 100°C. The dual LED displays provide clear and convenient monitoring of both working and safety temperatures, while integrated optical and acoustic warnings enhance operational safety. The adjustable safety circuit, with a range up to 110°C, and sub-level protection ensure secure and dependable operation. Designed for efficiency and ease of use, the ICC 100 Lite Eco is compatible with 18 L baths, making it suitable for a wide range of laboratory applications. Its lightweight and compact design, with dimensions of 5.3 x 11.9 x 7.1 inches and a weight of 9.3 pounds, allows for easy integration into any setup. Built to comply with DIN 12876 standards, this circulator combines precision, safety, and reliability, making it a valuable addition to any laboratory workflow. INCLUDED: The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator includes: - ICC 100 lite Compact Immersion Circulator - IB 18 eco Plastic Bath - BL.ICC Large Bridge - Screwdriver for Safety Circuit - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

This New Brunswick Scientific Innova 3100 Shaking Water Bath was removed from a university lab where (more) it was surplus to requirements. The unit has been fully tested by a service engineer. It is in full working order. It is in reasonably good cosmetic condition with some marks from use. Interior dimensions:L45cm x W35cm x D15cm

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab This item was removed from a university wher (more)e it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).

Thermo Scientific Haake A28 Chiller Lab This item was removed from a university where it was surplus (more) to requirement. It is in good cosmetic condition and holds water with no leak, however, as there is no controller included so we are unable to conduct further testing.

This listing is for a Genlab MINI/50 Incubator. The unit is in full working condition and is ready  (more)for immidate realese. Enhance your laboratory's capabilities with the Genlab MINI/50 Incubator, a compact and efficient solution designed for a variety of applications in biological research, quality control, and education. This incubator ensures optimal temperature control and reliability, making it an essential tool for any laboratory setting. Key Features: Temperature Range: The MINI/50 offers a temperature range from 5°C to 70°C, allowing for precise environmental control suitable for diverse applications. Accurate Temperature Control: With a fluctuation of only ±0.25°C at 37°C, this incubator guarantees stable conditions for sensitive experiments and sample storage. User-Friendly Design: The intuitive control panel and clear digital display make it easy to set and monitor the desired temperature, ensuring hassle-free operation. Durable Construction: Built with a robust stainless steel chamber and a solid outer casing, the MINI/50 is designed for longevity and resistance to corrosion. Technical Specifications: Capacity: 50 liters, providing ample space for various samples. Dimensions: Internal height: 330mm Internal width: 490mm Internal depth: 330mm External height: 590mm External width: 610mm External depth: 470mm Power Supply: Operates efficiently with standard electrical requirements, ensuring energy savings. Benefits: Versatile Applications: Ideal for cell culture, microbiological studies, and enzyme reactions, the MINI/50 accommodates a wide range of laboratory needs. Enhanced Safety Features: Equipped with an over-temperature safety cut-out, ensuring the protection of your samples and experiments. Easy Maintenance: The smooth interior surfaces facilitate quick cleaning, helping maintain a sterile environment. The Genlab MINI/50 Incubator is the perfect choice for laboratories seeking a reliable, compact, and efficient incubator. Experience superior temperature control and enhance your research outcomes with this essential laboratory tool today!

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Labcaire HLF18 Laminar Flow Cabinet This was removed from a laboratory where it was surplus to requi (more)rements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx50 Wx183 Hx72cm

Thermo Scientific Sorvall Legend XFR Centrifuge This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition both internally and externally. The item powers on and works as intended, it has been temperature-tested. (Thermometer not included) Also includes the following: Thermo Scientific 75003607 TX-750 Rotor & 75003608 750mL Round Buckets (set of 4)Max Speed: 4700 rpmMax RCF:4816 x g

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz