Thermo Scientific Sorvall Legend XFR Centrifuge With 4700rpm Rotor ab

This Beckman JA-20 20,000 RPM  Centrifuge Rotor was removed from a university lab where it was  (more)surplus to requirements. It is in reasonably good cosmetic condition but does have marks from use. It has not been tested and will need to be inspected for safety by a qualified technician before it can be used again. It fits 20ml sample tubes.

6 x ALC Centrifuge Buckets For Rotor Lab This item was removed from a university where it was surplu (more)s to requirements. The buckets are in fair cosmetic condition and consist of the following: - 2 x ALC R2017 buckets designed to hold 7 x 15ml tubes - 2 x ALC R2012 buckets designed to hold 5 x 25ml tubes - 2 x ALC buckets designed to hold 2 x 50ml tubes

Centurion Scientific Centrifuge 4050 Series Cell-Prep This item was removed from a university labora (more)tory where it was surplus to requirements. The centrifuge is in reasonable cosmetic condition, with visible signs of wear and some rust. It powers on without issue and has been tested to operate at 50 RPM, 100 RPM, and its top speed of 200 RPM. Included Components: - 12-bay centrifuge rotor - 1x balance weight Specifications. - Model: 4050 Series Cell-Prep - Serial No.: 98042157

Hermle Z446 Centrifuge The Z446 universal centrifuge series offers the highest capacity of any bench (more)top Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus FC5718R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 18,0 (more)00 RPM Maximum Capacity 4 x 100ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5718R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5718R Frontier Multi-Pro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

Benchmark H3565-45-LCI IncuView Integrated Microscop Shelf, 45L (For H3565-45 Only) The Benchmark In (more)cuView Live Cell Imaging system is an expansion to the capabilities of the SureTherm CO2 incubators. A compact microscope integrated with an additional incubator shelf connects to the large, external display, and allows cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on a large, integrated display or viewed locally or remotely with a Wi-Fi enabled phone, tablet, or computer. Additional features include a time-lapse mode for capturing images at user-set intervals for up to 99 days, an enhanced optical system for sharper, crisper images, as well as a fully programmable illuminator for darkfield, brightfield, and high contrast. INCLUDED: The Benchmark H3565-45-LCI IncuView Integrated Microscop Shelf, 45L (For H3565-45 Only) includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IF450plus Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 449 L (15.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF450plus Forced Circulation Incubator 449L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, making it an ideal solution for sensitive laboratory applications. With a large 449 L (15.9 cu.ft.) stainless steel chamber, this incubator offers ample space and is designed for durability and easy cleaning. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller features dual high-definition TFT-color displays, enabling precise adjustments of temperature, fan speed, and other critical parameters. Equipped with AutoSAFETY features, the IF450plus offers over- and undertemperature monitoring along with a mechanical temperature limiter TB for enhanced safety. The forced air circulation system allows for fan speed adjustments in 10% increments and includes a pre-heated fresh air admixture for consistent performance. The Function SetpointWAIT ensures that the process only begins when the set temperature is reached, ensuring reliable outcomes. Additionally, the fixed sterilization program provides thorough chamber cleaning at 160°C for 4 hours, ensuring a hygienic environment for sensitive experiments. INCLUDED: The Memmert IF450plus Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Equipped with: 1x MSE Mistral swing out rotor

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé