Parker Balston UHPN2-1100 Nitrogen Generator

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

KK - DURABLE AND HIGHLY CUSTOMIZABLE The KK 500 FIT DS allows the operator to precisely set the temp (more)erature and humidity inside the chamber, as well as control and monitor the light intensity. You can set the temperature from 0°C to 60°C (with the lights off) or from +10°C to +50°C (with the lights on) and thanks to an ultrasonic humidifier, adjust the humidity from 30% up to 90%. The wording 'DS' (Door-Side) indicates that the fluorescent lamps are installed in both the lateral walls and the door. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART PRO control panel is among the most complete you can find on the market. You can manage the instrument and day/night conditions with control of light intensity in an instant, with the large touchscreen. You will save your temperature, humidity and light programs and download the event log, for a professional and precise workflow. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Durable. Tailored. Tailored? Yes! Light panels are made to your specifications, with a range of different wavelength LED options available. As standard, for the KK 500 FIT DS, fluorescent lamps (white light 840 - continuously adjustable) are installed in the side walls and in the door. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm Presentation of the climatic chamber with LED lighting: Together with the climatic chamber you will also receive: DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System. For more information, we invite you to view our article POL-EKO Accessories, where you can find photos and characteristics of all the accessories available for Pol-Eko models. Accessories for KK climatic chambers: - Optional separate controls for each light module - Grid shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Phytotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Container for deionized water

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel wire shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access hole - Additional 30 mm access hole - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

SCHMIDLIN DBS PG-H2 Hydrogen Generator, 250 mL/min Model : PGH2 250 Recommended for GC chromatograph (more) detector gas applications and GC, GC/MS carrier gas applications. Designed with automatic cascading capability.

GT 3000 Ultra Zero Air Generator VICI DBS Model : N-GT 3000 The GT Ultra Zero Air generator produces (more) laboratory grade purified air for various GT-detection systems (e.g. FID, NPD, FPD) and dedicated analyzers.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 200 g for F2 class and lower. The comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator XA 5Y.KO series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The comparator features an aesthetic, large weighing chamber and a glass draft shield in one. Its asset is an automatic door opening system. The XA 5Y.KO series features an intuitive menu supporting a user in instrument operation.

IKA R 1352 Centrifugal Stirrer Two-bladed, blades open with increasing speed. For stirring in round (more) vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.Stirrer Ø: 60 / 15 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1352 Centrifugal Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Digital block heater for two aluminum blocks provides precise temperature control in small vessels.  (more)Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations. Stepless adjustable temperature up to 120°C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test Number of blocks: 2 Heat output: 250 W Heating temperature range: Ambient +5°C to 120°C Temperature display: yes Adjustment and display resolution: 1 K Connection for ext. temperature sensor: CT (DIN12878) PT 1000 variation;DIN EN 60751 Kl. A: ≤ ± (0.15 +0.002xITI) K Temperature stability within the blocks at 37°C: ±0.2°C Temperature stability within the blocks at 60°C: ±0.4°C Temperature Homogenity at 37°C: 0.2 K Temperature Homogenity at 60°C: 0.4 K Heatingrate / Heat up time with external sensor: 4.5 K/min Set-up plate material: Aluminium alloy Set-up plate dimensions: 96 x 152 mm Fixed safety circuit: 150°C Timer: yes Time setting range: 1 – 5999 min Dimensions (WxHxD): 151 x 73 x 304 mm Weight: 1.724 kg Blocks included: 1x DB 1.2: Used for Eppendorf microtubes (1.5 ml) Pore size: Ø 11.5 mm No. of holes: 20 Hole depth: 36.9 mm Dimensions (WxDxH): 95 x 76 x 51 mm 2x DB 5.1: Used for 12 mm vials Pore size: Ø 12.7 mm No. of holes: 20 Hole depth: 30.0 mm Dimensions (WxDxH): 95 x 76 x 51 mm 1x 13.9: Used for round bottom tubes (12/13 mm) Pore size: Ø 13.7 mm No. of holes: 16 Hole depth: 48.4 mm Dimensions (WxDxH): 95 x 74 x 51 mm

Small sample volume from 50ml -120ml. Continuously variable single shaft pump and stirrer with digit (more)al readout. Manual fill, drain and cleaning. Chemically compatible as standard. Particle size:Up to 600µm – sample dependent Stirrer speed: 350 – 3,500rpm Dimentions: 140mm x 175mm x 390mm Weight: 6.75kg 100-240V / 50-60Hz / 20W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW