Radwag XA 200.5Y.KO Mass Comparator

An accessory for the ELLIPSIS laboratory balances, designed to read fingerprints in order to log int (more)o the balance. Simply touch the reader to log in. The fingerprint reader is connected to the ELLIPSIS balance via the USB port.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 10 μg for loads ranging from 2 g to 50 kg.

Self-centering weighing pan of a floating nature is intended for APP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the APP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass. The pan surface is covered with cork featuring marks that determine position of particular weights.

The new RMC 20000.5Y robotic mass comparator guarantees the utmost repeatability within 1 kg - 20 kg (more) range with the readability of 100 µg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 20000.5Y mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The new RMC 20000.5Y mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 10 positions. The RMC 20000.5Y enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 20000.5Y mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Ejectable mass standards magazine For the user's convenience, the magazine slides out of the robot's footprint at the time of arming and allows weights to be applied very easily, then positions itself automatically when retracted. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.

RMCM-100 robotic mass comparator guarantees the utmost repeatability within 1 g - 100 g range with t (more)he readability of 0.1 µg. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The RMCM-100 mass comparator comes standard with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in three locations. The characteristic feature of the RMCM-100 is high readability of pressure, 0.001 hPa, humidity, 0.01 %, and temperature, 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. A Mass Comparator and a Robotic Transport System in One Compact Device This combination results with: reduction of air drafts and vibrations from a robotic system in the course of comparison, minimised risk of human error, easier maintaining of stable environmental conditions inside the weighing chamber (thanks to a compact device dimensions). Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process. Remote, real-time preview of comparison process in real time is possible thanks to a video camera. Universal magazine insert shape Mass standard magazine features 120 positions. The RMCM-100 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert.

Ohaus multi-tube vortex shakers These vortexes are ideal for processing a large amount of samples at (more) the same time. They consist of interchangeable foam racks for mixing tubes with a diameter of 10 to 29 mm. Feet with powerful suction cups reduce movement and prevent the device from slipping on the work surface, for safe operation in your laboratory. High speed and small orbit make these mixers perfect for mixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Easily process up to 50 samples simultaneously - Custom multi-tube mixer with six different tube racks and an extension kit - Easy-to-clean monobloc stainless steel chassis, perfect for a variety of environments, especially cleanrooms - For demanding samples, mixing can be improved by making it more vigorous thanks to the programmable pulse mode (digital models only). In addition, it is possible to adjust the interval of the pulse times and customize its operation The product includes: Foam rack for 12 mm tubes (code 30400239) Applications High throughput suspensions, genotyping, DNA and RNA testing in clinical laboratories Display Independent LED displays with speed and time information allow the operator to view both settings simultaneously (digital models) Operation Detachable three-wire cable and plug (included) Structure Foam and stainless steel rack for (50) 12mm diameter tubes (included). Interchangeable with foam rack for mixing tubes with diameter from 10 to 29mm

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Julabo CORIO CD-BC26 Heating Circulator, 115V/60Hz (NRTL Certified) Working Temperature Range 20°C - (more) 150°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CD Heating Circulator combinations with stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation.CORIO™ CD immersion circulator provides temperatures from +20 to +150 °C. Integrated pump enables temperature incubation for internal or external bath applications. A lever below the display enables simple adjustment between internal and external flow. Pump capacity: 15 L/min; 5.1 PSI. The integrated USB port provide external PC communication for control / monitoring and data logging.The CORIO™ CD has M16x1 male pump connections and comes with sets of 8 and 12 mm hose barbs. Stainless steel tanks include drain port.For internal and external temperature applications. High quality stainless steel bath tanks with bath lid, drain tap and integrated cooling coil.INCLUDED: The Julabo CORIO CD-BC26 Heating Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Simultaneously perform dewaxing and antigen retrieval on slides prior to immunohistochemical stainin (more)g. Module offers consistent antigen retrieval for high quality immunohistochemistry. Using gentle heat, the retrieval device quickly produces outstanding results while maintaining the integrity of delicate tissue. In addition, most users can streamline testing practices by consolidating various antigen retrieval methods into only one or two PT Module antigen retrieval device procedures that can be run simultaneously. Precise temperature control without the damaging effects of temperature variations, microwaves or pressure delivers a level of consistency unmatched by any other instrument available. Easy to use, one-touch operation via built-in touchscreen Operator defined, preprogrammed time and temperature settings Dual reaction baths, each with 24-slide capacity, for simultaneous operation of two independent procedures Proprietary epitope recovery solutions for safe, nontoxic, solvent-free and environmentally improved dewaxing Provides for rapid, gentle heating, eliminating microwave and pressure cooker variability Maintains excellent tissue/cellular morphology Efficient, time-saving transfer of fully compatible slide racks directly to any Autostainer after treatment to avoid slide manipulation Fully programmable for overnight operation or delayed-start, early-morning pre-heating Can be connected to a remote computer to monitor and log antigen retrieval reports for regulatory compliance. The PT Module is fully automated and includes PT Monitor software for printing/maintenance of regulatory compliant procedural reports. Slide Capacity: 48 Glass slides (2 tanks of 24 slides) Reagent Capacity: 1.5 L Including PC

The Qubit fluorometer uses the very latest in illumination and detection technology for the highest  (more)sensitivity, you can use as little as 1 µL of sample and still get great results, even with very dilute samples. Dynamic range: 5 orders of magnitude Light sources: Blue LED (max ~460 nm), Red LED (max ~635 nm) Excitation filters: Blue 400 – 490 nm, Red 570 – 645 nm Emission filters: Green 510 – 580 nm, Red 655 – 725 nm Photodiode detectors: 300 – 1000 nm Calibration: 2 or 3 point standard Tube type: 500 µL clear tubes Warm up time: 2 sec Dimensions: 114 x 166 x 46 mm Weight: 219 g