Climatic chamber KK 500 FIT DS POL-EKO

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus t (more)o requirements. The unit powers up but shows the following error. M26 - LAMP COOLING BLOWER FAILURE.The manual states: 1. The blower is bad.2. The blower relay is bad.3. The airflow switch is bad. We have been advised that the system is missing some essential parts. These parts are available from the manufacturer. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs due to the error.

This Agilent 5183-2003 Nitrogen Gas Generator was removed from a university lab where it was surplus (more) to requirements. The system has not been tested at our facility. It is in good cosmetic condition with marks from use. The lab confirmed it was in good working order prior to removal.

Peak Scientific NM60L-ACS Nitrogen Generator This system was removed from a university lab where it  (more)was surplus to requirements. The nitrogen generator is in good cosmetic condition. It powered on, with the power light illuminating green. Specifications: - Serial No.: S3-06-54 - 60 litres per minute nitrogen generation - Three pressure gauges: Back-up, Air, and Output - External compressed air source required (no built-in compressor)

This listing is for a Domnick Hunter Nitrox Z UHPZN1001 Nitrogen Generator. The unit is in full wor (more)king condition and is ready for immidate realese. Supplied with box of accessories. Unlock the power of high-purity nitrogen with the Domnick Hunter Nitrox Z UHPZN1001 Nitrogen Generator. Engineered for reliability and efficiency, this nitrogen generator is the ideal solution for laboratories and industrial applications requiring a continuous supply of ultra-high-purity nitrogen. Key Features: High Purity Output: The Nitrox Z UHPZN1001 delivers nitrogen with a purity level of 99.9999%, ensuring optimal performance for sensitive applications in chromatography, pharmaceuticals, and more. Advanced Pressure Swing Adsorption Technology: Utilizing cutting-edge technology, this generator effectively removes oxygen, moisture, and other contaminants, providing a consistent and reliable nitrogen supply. Compact Design: The compact footprint allows for easy integration into laboratory or production environments, maximizing space efficiency without sacrificing performance. User-Friendly Interface: The intuitive control panel and digital display make monitoring and adjusting settings straightforward, enhancing operational efficiency. Technical Specifications: Nitrogen Output: Up to 1,000 liters per hour, catering to various application demands. Output Pressure: Adjustable pressure settings to meet specific requirements. Power Supply: Designed for low energy consumption, promoting cost-effectiveness and sustainability. Benefits: Cost-Effective Solution: Eliminate the need for high-pressure gas cylinders, reducing ongoing costs and enhancing safety in your workspace. Flexible Applications: Perfect for laboratories, manufacturing, and research institutions, the Nitrox Z is versatile enough to meet diverse nitrogen needs. Maintenance-Free Operation: With minimal maintenance requirements, this generator ensures uninterrupted nitrogen supply, allowing you to focus on your core activities. The Domnick Hunter Nitrox Z UHPZN1001 Nitrogen Generator is your go-to solution for high-purity nitrogen generation. Experience enhanced productivity, safety, and cost savings in your laboratory or production environment today!

KK - DURABLE AND HIGHLY CUSTOMIZABLE The KK 500 FIT DS allows the operator to precisely set the temp (more)erature and humidity inside the chamber, as well as control and monitor the light intensity. You can set the temperature from 0°C to 60°C (with the lights off) or from +10°C to +50°C (with the lights on) and thanks to an ultrasonic humidifier, adjust the humidity from 30% up to 90%. The wording 'DS' (Door-Side) indicates that the fluorescent lamps are installed in both the lateral walls and the door. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART PRO control panel is among the most complete you can find on the market. You can manage the instrument and day/night conditions with control of light intensity in an instant, with the large touchscreen. You will save your temperature, humidity and light programs and download the event log, for a professional and precise workflow. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Durable. Tailored. Tailored? Yes! Light panels are made to your specifications, with a range of different wavelength LED options available. As standard, for the KK 500 FIT DS, fluorescent lamps (white light 840 - continuously adjustable) are installed in the side walls and in the door. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm Presentation of the climatic chamber with LED lighting: Together with the climatic chamber you will also receive: DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System. For more information, we invite you to view our article POL-EKO Accessories, where you can find photos and characteristics of all the accessories available for Pol-Eko models. Accessories for KK climatic chambers: - Optional separate controls for each light module - Grid shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Phytotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Container for deionized water

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel wire shelf INOX - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access hole - Additional 30 mm access hole - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

Leica Leitz Labovert FS Microscope With Leica 12V/100W Power Supply Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and in working order. This microscope features the following components; Leica 12V/100W Power Supply 4 x Objectives:- Modulation optics inc HMC 20 LWD 0.4NA 160/0-2 Objective - Modulation optics inc Hoffman modulation contrast HMC EF 10x 0.25na 160/- objective - Leica 160/- EF 4/0.12 objective - Modulation optics inc HMC 40 LWD 0.5NA 160/0-2 objective 2 x Eyepiece:- Leitz Periplan GF 10x/20 M Lense

Dimensions (H x W x D): 650 x 1125 x 500 mm Internal dimensions (H x W x D): 460 x 1090 x 460 mm