SCHMIDLIN DBS PG-H2 Hydrogen Generator, 250 mL/min

PURE AQUA SERVICE resin for replacement BINDER 6011-0077 BINDER reference: 6011-0077 For BINDER clim (more)atic chamber New material Year of manufacture: 2012

GT 3000 Ultra Zero Air Generator VICI DBS Model : N-GT 3000 The GT Ultra Zero Air generator produces (more) laboratory grade purified air for various GT-detection systems (e.g. FID, NPD, FPD) and dedicated analyzers.

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

QL-1000 Laboratory Hydrogen Generator This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Peak Scientific NM60L-ACS Nitrogen Generator This system was removed from a university lab where it  (more)was surplus to requirements. The nitrogen generator is in good cosmetic condition. It powered on, with the power light illuminating green. Specifications: - Serial No.: S3-06-54 - 60 litres per minute nitrogen generation - Three pressure gauges: Back-up, Air, and Output - External compressed air source required (no built-in compressor)

Witeg SWUF-80 compact ultra-low freezer. Capacity 82 L. Temperature range from -65 ºC to -86 ºC. Rap (more)id cooling to -80 ºC in 170 min. PT100 probe. CFC-free refrigerant. High quality insulation. Controller with touch screen connectable with wifi to mobile phone. Self-diagnosis function. Alarm reception. Data transfer via USB. Two interior doors and a shelf. Stainless steel. Dimensions (LFA): interior 485*340*520 mm; exterior 687*530*1060mm; 60 kg. User manual. The WITEG Labortechnik GmbH ultrafreezer is high-quality equipment designed for the conservation of biological samples and reagents at extremely low temperatures. With a storage capacity of up to -86°C, this freezer ensures the preservation of samples in optimal conditions for long periods of time. Additionally, it features a precise temperature control system and robust construction that ensures reliable, long-lasting performance in demanding laboratory environments. Ideal for research laboratories, hospitals and diagnostic centers that require safe and reliable storage at low temperatures.

This compact device is ideally suited as an external light source for fluorescence excitation in mic (more)roscopy. The coupling takes place via liquid light guide. The optimized internal airflow cools the lamp effectively and ensures quiet operation. A resetable operating hour counter enables the control of lamp life. The brightness of the light can be varied with a mechanical dimming unit in 5 steps (0 to 100%). Lamp type: HXP R 120W/45C VIS with focussed reflector (OSRAM) Light output: Light guide retainer Storz long, for light guide active Ø 3 mm Shutter: Electrical control via interface, max. frequency 40 Hz, switching time approx. 6 ms Dimming: Mechanically, 5 Steps 0 to 100% Dimensions (WxHxD): 210 x 130 x 290 mm Weight: 4,7 kg

Met One offers battery-operated portability, up to six size channels and a built-in printerall in on (more)e simple, compact instrument. The Met One 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The bright LED display lets you see the data easily and the printout shows cumulative and differential count data for each size range. Channel Sizes: 2 ch; 0.5 µm, 5.0 µm – 4 ch; 0.5 µm, 0.7 µm, 1.0 µm, 5.0 µm – 5 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 5.0 µm – 6 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm Flow Rate: 0.1 CFM (2.83 LPM) Coincidence Limit: 2 million/ft3 Light Source: Laser diode Data Storage: 500 samples, rotating buffer Sample and Hold Times: 1 second to 24 hours Count Alarms: 1 to 9,999,999, counts each channel Count Modes: Manual, auto, concentration, beep Concentration Mode: 1 second samples, 1 to 10 samples averaged, display updated every second; displays counts/ft3, liter or counts/1000L (m3) Battery Recharge Time: 16 hours (with unit off) Battery Operating Time: 4 hours with printing, 8 hours without printing Dimensions (WxhXD): 170 x 120 x 300 mm Weight: 3.1 kg

M1 Mass Standard - knob weights - set (1 g - 500 g), plastic box.

Motic Panthera C2 Trinocular Compound Microscope w/ Moticam BMH4000X Microscope Camera Objectives UC (more) Plan Achromatic (Pb free) 4X, 10X, 40X, 100X Fine Focus Precision Color Corrected Infinity Optical System (CCIS®) Transmitted Illumination (FPS) Koehler LED 3W and Quartz Halogen 6V/30W Features - Mechanical stage with built-in low position rackless coaxial stage control and sample holder for smoother x/y movement - Includes light memory, sleep mode (auto on-off), and nosepiece LED light intensity indicator - Coaxial coarse and fine focusing with 2μm precision and adjustable upper limit stop - Compatible with separate accessories for phase contrast, polarization and dark field to ensure compatibility with a variety of applications - 11.6" LCD screen with native 1920x1080 pixels for real-time viewing - 8MP capture resolution with outputs via HDMI, USB, and WIFI