Wild Heerbrugg M420 Zoom Stereo Macroscope Mikroskop Makroskop 10x/21B 0.5x Lens

Motic AE21 Series Trinocular Inverted Microscope w/ 3x Objectives This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.5 1x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.3 1x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Leitz Diaplan Microscope with Multi-Head Bridge Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and working order. This microscope features the following: 1 x Leica Diaplan Microscope Body. 1 x Leitz 513578 Multi-Head Bridge Fitted With:1 x Leitz Trinocular Head. 2 x Leitz 519817 Periplan GF 10x/20M Eyepieces. 1 x Leitz 512740/20 Ergonomic Tilting Binocular Head Fitted With:2 x Leitz Periplan 10x/18M Eyepieces. 1 x Leitz 513703 Polarized Light Slider. 1 x Leitz Mechanical Stage and Slide Holder. 1 x Leitz 513594 Universal Condenser With ACHR 0.90 S1.1 1 x Leitz 514686 12v 100watt Halogen Lamp. The Microscope is fitted with 4 x Objectives: 1 x 79696Leitz170/0.17PL Apo Oel100/1.32 1 x 519737Leitz160/0.17NPL FLUOTAR40/0.70 1 x 519872Leitz160/-PL FLUOTAR10/0.30 1 x 519759Leitz160/-EF 4/0.12

This was removed from a university lab where it was surplus to requirements The unit powers up and h (more)as been tested. It is in full working order. It is in good cosmetic condition with some marks from use. The left hand stage dial is missing but still operates. 2 x Eyepieces WH10X-18MM 4 x Objectives:-Kyowa A4 0.10 160Kyowa A10 0.25 160/-Kyowa A100 1.25 OiL 160/0.17Kyowa A40 0.65 160/0.17

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A These units were remov (more)ed from a university lab where they were surplus to requirements. Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads. They are in good cosmetic condition with minor marks from use. 1x Anritsu Error Detector MP1764AModel. M06340 1x Anritsu Pulse Pattern Generator MP1763BModel. M06940

Crest Ultrasonics Mesh Basket for P1200 Ultrasonic Cleaner The Crest Ultrasonics Mesh Basket for P12 (more)00 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Mesh Basket for P1200 Ultrasonic Cleaner is 19" in length x 5" in width x 5" in depth and is for use with the P1200 Ultrasonic Cleaners. The Crest Ultrasonics Mesh Basket for P1200 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump (more), 120V, 60Hz3D Visualization of the Polyscience Recirculating CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. This Liquid-to-Air Recirculator continuously pumps near-ambient temperature water from a reservoir to an external heat source, through a cooling radiator, and then returns cooled water to the reservoir. By blowing ambient air over the radiator, water flowing inside is cooled and the heat is exhausted into the atmosphere.Features An economical solution for applications where cooling fluid temperature is higher than ambient and temperature control is not required NOTE: No compressor. Uses fan cooling of cooling fluid Quiet liquid-to-air cooling Positive displacement or turbine pump Built-in low liquid level indicator INCLUDED: The Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).