Sciex Pulser Module PN 025195 for Mass Spectrometer System Lab

Bruker MicrOTOF II Time-Of-Flight Mass Spectrometer This item was removed from a university laborato (more)ry where it was surplus to requirements. The spectrometer powers on and is in good cosmetic condition, with a few very small marks on the outer casing. A loss of MS signal was reported to Bruker in August 2022. After replacing the glass capillary, the issue was temporarily resolved but re-occurred in October 2022. Bruker advised replacing the MS source door and the roughing pump. Due to the required MS source door and roughing pump, this system is not functional and is listed as Spares/Repair. Includes: - 1 x new Bruker 8236619 maintenance kit (air filter, hydrocarbon trap, oil backing pump oil, exhaust filter cartridge, and filter mat) - 4 x data cables - 4 x U-bend stainless steel 1/2" pipes - 1 x air 90˚ elbow connector 1" Serial No.: 823175010435

Waters Source Ion Guide A Part Number 700004952 This was removed from a university lab where it was  (more)surplus to requirements. The unit is boxed but not sealed. We are unsure if it has been used. It comes boxed with a Certificate of Conformity

Bruker MicrOTOF Q Mass Spectrometer This item was removed from a university laboratory where it was  (more)surplus to requirements. The mass spectrometer powers on and is in great condition with minimal wear. No further testing has been conducted. Specifications:- Model: micrOTOF-Q - Serial No.: 228888.00074 Included Software:- I/O and Security Software and Documentation - Version: 1.16 - HP / Hewlett-Packard REV.B - CD Kit: 443200-404

Bruker  MicrOTOF-Q ll Mass Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. This Bruker Spectrometer is for spares or repairs. The previous owner has had an engineer report that states a new turbo pump, communications board for the pump and other PCBs are required. It is in excellent cosmetic condition with only minor marks but is sold for spares/repairs. Model QT 0201 G 003Serial No. 228888.10222Year 2009 The unit powered on with the cooling fan operational and a red light showing on the STATUS indicator.No other testing carried out.

ThermoFinnigan DELTAplus XL System w/ PC & Various Software This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was in good working order prior to removal. Included are; Dell Optiplex GX240 PC w/ Dell Keyboard & MouseModel#: DHMSerial#: 528K90J Software;Isodat 2.0Eager 300 for EA1112Decom ALO Manuals included: Isodat 2.0 Operating ManualIsodat NT Operating Manual Upgrade to Version 2.0Isodat NT Operating ManualIsodat NT Fiberline Driver Istallation GuideBoc Edwards Instruction ManualDeltaPlus XL Operating ManualDeltaPlus XL Service Handbook Service Manual Also included are various replacement parts as follows: Finnigan MatPart#: 202640Serial#: X00520372 Finnigan Mat Power SupplyPart#: 2010851-00Serial#: X05111789 Finnigan Mat Power SupplyPart#: 2010861-00Serial#: X00121805 Thermo Electron (Bremen)Plug and Measure AdaptSerial#: 2052660 Finnigan MatPart#: 1038081Serial#: X05110203 Finnigan MatPart#: 1038402Serial#: X04510120 Finnigan MatPart#: 0243312Serial#: X04210254

Thermo Scientific LTQ Orbitrap Velos with ETD Mass Spectrometer This was removed from a university  (more)lab where it was surplus to requirements. The university said it hadn't worked properly for some time, and on inspection, it had been slightly stripped for parts. We did not power it up to avoid damage to the unit. It is in otherwise good cosmetic condition with marks from use.

New generation of Ohaus portable scales These balances are ideal for laboratory and industrial appli (more)cations. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

Beckman Coulter Z1 Particle Counter with Controller This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. it is in good cosmetic condition with minor marks.

Dimensions (WxDxH): 140 x 135 x 635 mm Compartment dimensions (WxDxH): 135 x 135 x 55 (x11) mm

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in working order. It will need to be calibrated upon installation. It is in good cosmetic condition with minor marks from use. Item has 4 shelves. Internal dimensions are L49cm x W48cm x H66cm.

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 100-1000ul Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 0.60/0.70/2.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station NW40, 100-120V Ultimate vacuum <5 x 10-8mbar Pumping Spee (more)d for N2 47 ls-1 Back Pump Speed 1.6 m3h-1 at 50 Hz Features - Base plate includes rubber feet and cut-outs in the sides for manual handling, giving a compact low profile but stable design that can’t be knocked over - All metal frame means rugged design that can take abuse without cracking or breaking - E2M1.5 or XDD1 high capacity backing pumps giving the choice between an oil sealed pump or a totally dry diaphragm pump - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - Customer integrated control features: - Single dedicated button to start/stop - Easy to read accuracy display - Ability to select vent mode where a TAV5 vent valve is fitted for automated venting with no user intervention - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application. - User serviceable nEXT85H turbomolecular pump T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines the nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1. The T-Station 85 comes with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. This is combined with the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, making the T-Station 85 is ideal for general laboratory needs. INCLUDED: The Edwards T-Station 85H Wet Turbo Station NW40, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT85H Turbomolecular Pump with NW40 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty