Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

This DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox was removed from (more) a university lab where it was surplus to requirements. The unit has not been used in some years and will need a full service before it is used again. The gloves will also all need replacing. All the parts of the unit are in very good condition. and they all powered on with no issues. It's in good working order. The door lock system on the glove ports all works correctly. The heating function works and was tested with a digital thermometerIt was set to 37˚C, our thermometer measured 36.7˚C ad the display was showing 36.9˚C. The temperature did fluctuate slightly but was never above the set value. The gas system was not tested. The glove box's internal dimensions are 185cm(L) x 69cm (W) x 79cm (H).The airlock unit's internal dimensions are 30cm (L) x 35cm (W) x 30cm (H).The system is mounted on a substantial metal frame with wheels that stands at 94cm to platform height.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where i (more)t was surplus to requirements. The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm. It is in reasonable cosmetic condition but has some fairly heavy usage marks. Internal dimensions - L54 W52 H36cmShaker Platform - 45.5 x 45.5cm Tube stand inside holds 20 x 50ml tubes

Excella E25 Incubator Shaker Series Lab This item was removed from a university where it was surplus (more) to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Memmert IF55 Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 53 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF55 Forced Circulation Incubator 53L, 115V offers precise temperature control and efficient forced air circulation, making it ideal for a variety of laboratory applications. With a setting temperature range of +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures consistent performance for temperature-sensitive processes. The spacious 53L (1.1 cu.ft.) interior is made from reinforced stainless steel, designed for easy cleaning and long-lasting durability. Its ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, complete with a high-definition TFT-color display, allows for accurate adjustments of parameters such as temperature, fan speed, air flap position, and program time. In addition to its advanced functionality, the IF55 includes several safety features, such as an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meet protection class 1 standards according to DIN 12880. The forced air circulation system, powered by a quiet air turbine adjustable in 10% steps, includes the option for pre-heated fresh air admixture to further enhance control over the incubation environment. With a maximum chamber load of 176 lbs and each shelf supporting up to 44 lbs, the IF55 is built for reliability and precision, offering advanced AtmoCONTROL software for programming and data management via Ethernet or USB. INCLUDED: TheMemmert IF55 Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This listing is for a Brand New Harvest Right Large Pharmaceutical PRO Freeze Dryer sold through ULM (more)freezedryers.comWe are stock holders in UKPrice Before VAT - £5,950Harvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh.Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency.What’s IncludedLarge Pharma Freeze DryerPremier Vacuum PumpVacuum Pump OilOil FilterStainless Steel Trays (set of 8)Guide to Freeze Drying  Key Features & Benefits - The freeze dryer has built in intelligence. It automatically and perfectly manages the freeze drying process - The ideal vacuum pressure and drying temperature is maintained for each material—preserves freshness and potency - 10.25 square feet of tray space—nearly twice the capacity of Harvest Right’s standard Large freeze dryer - Shelf Unit Has shelves for 8 trays (each tray 228.6mm W x 520.7mm D x 19mm H) - 6 liters of ice capacity - Weight: 68KG  Warranty1 Year international warranty provided by Harvest Right.  Dimensions Overall product dimensions: 514.3mm W x 603.2mm D x 781mm H Perfect for a counter top, cart or table.  Power A dedicated 20 amp circuit is required.  Shipping Info - The large freeze dryer ships in one package with a total weight of 177KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA)- One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H - If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Simply filter and replace oil. Takes one or two minutes.  Vacuum Pump Each vacuum pump has been factory tested to guarantee 25 microns (25,400 Microns = 1 Inch of Hg) or better, and listed CFM performance.  Vacuum Pump Technical Specifications Oil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil or JB Industries Black Gold Vacuum Pump Oil Only DC Motor Energy Efficient Voltage: Standard, 230v Dimensions: 414mm x 152.4 x 307.3 Weight: 14.5KG Noise: 52 decibels  Product Comparison Industrial Oil Pump vs Standard Oil Pump Oil Changes This new Industrial Pump rarely needs to have the oil changed or filtered. The pump has a gas ballast feature that makes it so water does not stay in the oil. Because of this, the oil in the pump will be pristine and clear, even after 30 or more batches. You simply won’t need to change the oil until you have run 25 to 40 batches. Whereas, the oil in the standard vacuum pump needs to be changed and filtered every 4 or 5 batches (when using the new 3/8 inch vacuum hose). Vacuum Pressure Under cold and hot conditions the Industrial Pump will pull a deeper vacuum than the Standard Pump. Under cold conditions the difference is .05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump. Whereas, under warm conditions the difference is much greater: .05 Pascal for the Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especially not affected by warm, ambient conditions. When temperatures rise, it will pull a vacuum far better than the Standard Pump. The Industrial Pump is just not affected by outside heat. It pulls the same deep vacuum even when it is in a warm environment. Noise The Industrial Pump is substantially quieter than the Standard Pump, 52 decibels versus 64 decibels. The Industrial Pump at 52 decibels is about the same as a refrigerator. Oil Mist Filter Both pumps come with an oil mist filter. However, the Industrial Pump’s oil mist filter allows for no oil spray at all and it will last much longer. Power Use The Industrial Pump uses less power than the Standard Pump (187 watts versus 218 watts). Amperage Under hot conditions at ultimate vacuum pressure the Standard Pump pulls 2.1 amps while the Industrial Pump only pulls 1.7 amps. Hence, the Industrial Pump is more efficient. Weight The Industrial Pump is easier to move around as it weighs 5 pounds less than the Standard Pump (32 lbs. versus 37 lbs.) Life The Industrial Pump is more durable and will last longer than the Standard Pump.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Hermle 10 x 50ml Conical Rotor The Hermle 10 x 50ml Conical Rotor is a high-capacity centrifuge roto (more)r designed for use with Hermle Z32-HK, Z36-HK, Z327, Z366, Z446, and Z496 Series centrifuges. With a maximum speed of 10,500 RPM and a maximum RCF of 16,022 x g, this rotor is capable of efficiently and effectively separating biological samples. Its 38° angle allows for optimal separation, while its maximum capacity of 10 x 50ml provides ample space for larger samples. It is important to note that the maximum speed may vary depending on the centrifuge model used with the rotor. Overall, the Hermle 10 x 50ml Conical Rotor is a reliable and high-performing centrifuge accessory that can help researchers achieve their separation goals. INCLUDED: The Hermle 10 x 50ml Conical Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Promax 1020 Reciprocating Platform Shaker The temperature-controlled model with load capaci (more)ties of 5kg. The 1000 series reciprocating shaker can be easilyintegrated into the modular incubator system. This makes it possible tosuccessfully run temperature controlled applications. The Promax 1020 can alsobe used to purify proteins at 4°C. With a platform size of 290 x 258 mm, thereis enough space for the vessels used. With a stroke of 32 mm and a speed of 30 — 250 rpm, a properseparation of the samples is guaranteed. The integrated timer function enablesunattended operation so that you can concentrate on other tasks withoutworries. After the set time has elapsed, the acoustic signal signals the end ofthe shaking process. Supplemented with the appropriate holder for separatory funnels,a maximum of four pieces between 50 and 100 ml can be securely attached to thePromax 1020. Click Here to View Product Video INCLUDED: The Heidolph Promax 1020 Reciprocating Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty