Facilities & equipment

Gas chromatograph Hewlett Packard 6890 Series. Detectors mounted FID and ECD. Injection system "spli (more)t/splitless". Suitable for the detection of cannabinoids, terpenes, pesticides, solvents, aromatic components, among others. Detection times are very stable. Software ChemStation or Clarity to comply with CFR21 Part 11 (+ € 1,500), required for IQ / OQ. PC. Includes user manuals. Agilent Technologies - 6890 opt. 211 Flame Ionization Detector (FID) Manual (click here)

GC/MS Perkin Elmer that includes a GC Perkin Elmer Autosystem XL with FID, autosampler 82 positions  (more)and 2 injectors split/splitless, mass spectrometer detector Perkin Elmer Turbomass Upgrade single quadrupole and vacuum pump rotary Edwards RV3. Includes full PC, software-Turbomass 5.1 version, a library of compounds in the Nist and user manuals. Specifications: Large-volume injection. Controlled by a microprocessor. Able to accept a wide selection of capillary columns of phase states. Able to accept a series of detectors, universal and selective.

Gardner Denver Welch Cold Trap. Cold trap for suction and vacuum lines or Schlenk lines. It reaches  (more)−79 °C by using a mixture of dry ice and isopropanol or liquid nitrogen. Maintains temperature for 12 hours if dry ice/isopropanol is used or 2 hours if liquid nitrogen is used. 2.8 L internal glass. Transparent lid for visual inspection. Easy cleaning. The Gardner Denver Welch cold trap is used to process samples with low eutectic points. The trap is connected in series with a freeze-drying system or vacuum evaporation system and a vacuum pump to prevent contaminants from migrating to the vacuum pump.

Galileo GAHW-50 small Ultra-low freezer. Capacity 50 L. Temperature range from - 40 ℃ to - 86 ℃. Rap (more)id cooling. Danfoss compressor. 110 mm foam insulation. Microprocessor based temperature controller. LCD digital display. USB port. Password protected parameter settings. Audible and visual alarms of: high / low temperature, power failure, low battery, door open, and system failure. Stainless steel interior. Bolt. Double silicone gasket. Wheels. Low noise. Low consumption. CE marking. Optional: Chart Recorder, CO2 back up system, printer, RS232, RS485, remote alarm.

Galileo GAHL-S Series Ultra-low Freezers. Capacities of 398 L (model GAHL398S), 528 L (GAHL528S), 67 (more)8 L (GAHL678S), 778 L (GAHL778S), 858 L (GAHL858S) and 1008 L (GAHL1008S). Temperature range from - 40 ℃ to - 86 ℃. Rapid cooling. Compressors of European origin. 130mm double foam insulation. Microprocessor based temperature controller. Digital display with touch screen. Password protected parameter settings. Audible and visual alarms of: high / low temperature, power failure, low battery, door open, and system failure. Stainless steel interior. Magnetic system to ensure the closing of the door. Bolt. Double silicone gasket. Double interior door. Four shelves. Low noise. Low consumption. USB port for recording operational data. CE marking. Optional: Chart Recorder, CO2, back up system, storage racks / boxes, remote alarm. Price for 398L model shown (HL398S model). For other capacities select with the dropdown.

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Fungilab Thermovisc 100-F8 Refrigerated Re-Circulation Thermostat. Working volume 8 L. Range -10 to  (more)+ 100 ° C. Integrated cooling unit for measurement at 20 ° C without external cooling by circulating water. Stability ± 0.05 ° C to 100 ° C and ± 0.1 ° C to -10 ° C. Construction adapted to the rotary viscometer Fungilab: the measuring head fits perfectly on the sample holder. Integrated support for 2 beakers 600 mL. Opening 94 mm with locking device. Used to thermostate a second sample while measuring on the first. User manual.

Fisher Topmix vortex with adjustable speed, continuous or contact. Up to 3000 rpm. Orbital diameter  (more)4.5 cm. 4 anti-slip feet. From 10 to 40 Hertz. 230V 1,00 A 150 hz 45 W

Filtra FT97 vibrotamizer. Includes lid and five 200 mm stainless steel metal mesh sieves. Diameter o (more)f sieves 0.25, 0.5, 1.5, 2 and 7 mm, respectively.  Three-dimensional movement. Digital control of power, time and intermittent screening.

Filter 570 nm for microplate reader Asys.

Filter 492 nm suitable for readers microplate mark Asys.

Termobloque Fibertron 9560. Temperature max. of 120 ºC. Block for 24 tubes. Analog Control. Specific (more)ations: 220-240 V; 50-60 Hz

Filter 405 nm suitable for readers microplate mark Asys.

Growth chambers Faithful FPG Series. Capacities: 250 L (FPG-250), 350 L (FPG-350) and 450 L (FPG-450 (more)). Programmable 4-sided full spectrum LED lighting. Power from 0 to 30000 LX depending on the model. Forced ventilation. Temperature ranges: 10 to 65ºC (lighting); 0 to 65ºC (without lighting). Resolution 0.1ºC. Stability ± 1ºC. Uniformity ± 1ºC. Humidity range 40% - 95%. Humidity stability ± 5% RH. Stainless steel. Anti-frost. 7 "touch screen. Curves display. Automatic control of humidity / temperature during the photoperiod programmable by cycles. Timer 0-99.9 h / cycle. Overtemperature control. Includes 4 shelves. CE marking. Opcional: Light barrier, USB, printer, wireless SMS alarm, CO2 concentration control The price shown corresponds to the 250 L model (FPG-250). For other volumes use the dropdown. Labinstruments FPG Series Plant Growth Chambers are more accurate thanks to their adjustable four-sided LED lighting, forced ventilation for greater temperature stability, and a separate humidity generation system for more precision. Programmable cycles.

Faithful WGLL drying oven Series. Temperature range RT+5 ºC to 300 ºC. Stability ± 1 ºC. Uniformity (more) ± 2,5 ºC. Horizontal movement of air high efficiency and high uniformity thanks to air ducts double. Switch fan 3 speeds, adjustable according to needs. Temperature controller LCD with set to 0.1 ºC. Limiter temperature independent. SSR to ensure safety. System overheating protection. Digital LED display. Optional: RS485 interface, printer, remote control, SMS alarm Wireless, USB data storage. The price shown is for the model 30 L (WGLL30BE). For larger volumes, select model drop-down.

Conductivity meter pocket Eutech WPLOW-10. Measurement range of 0 to 1990 µS/cm, Waterproof. Resolut (more)ion 10 µS/cm and cell/CAT. Includes box and instruction manual. Specifications: Accuracy: +- 1% Full scale Calibration standard Range: 200 to 1990 µS/cm Calibration: 1 point ATC: 0 to 50 ° C Temperature coefficient: 2% per ° C Normalization Temperature: 25 ° C Auto off: 8,5 mins. after last keypress Operating temperature: 0 to 50 ° C Power battery: 4X 1.5 V LCD display (21x27 mm) Dimensions (WxD cm): 3,8x16,5 Weight: 90 gr

Eutech Instruments pH 510. pH meter with NEW electrode. pH measurement from 0 to 14. Internal memory (more). User manual. Eutech Instruments pH 510 is a high quality pH meter that comes with a brand new electrode, ensuring accurate and reliable measurements in a wide range of applications. This meter is ideal for use in laboratories, water treatment plants, aquaculture, fish farming, agriculture and more. With its ergonomic design and easy-to-read LCD display, the Eutech Instruments pH 510 is easy to use and provides fast, accurate results. Additionally, this meter features a waterproof housing making it ideal for use in wet or outdoor environments.

Euromex MicroBlue MB.1152 binocular microscope for education with achromatic 4/10/S40/S100x oil DIN  (more)35 mm objectives, mechanical stage and LED illumination. Designed with input from teachers and students with both intermediate and advanced science practice sessions in mind. Euromex MicroBlue MB.1052 binocular microscope for education with secured wide field eyepieces WF 10x/18 mm. Binocular 45° inclined tube, 360° rotation. Nosepiece for 4 objectives with achromatic 4x N.A. 0.10, 10x N.A. 0.25, S40x N.A. 0.65 and S100x oil N.A. 1.25 DIN 35 mm parfocal objectives. Square stage 115 x 100 mm with 55 x 22 mm X-Y translation stage. 1 W LED illumination with intensity control, rechargeable batteries with external power supply/charger. Paint with Antibacterial Protection Layer. Supplied with manual and dust cover in styrofoam case.

Euromex bScope binocular digital microscope with built-in 5 MP camera, HWF 10x / 20 mm eyepieces and (more) quintuple turret with IOS objectives with infinite oil correction plan PLi 4/10 / S40 / S100x, stage 131 x 152/197 mm with XY stage integrated mechanical 75 x 36 mm without rack. 3W NeoLED ™ Köhler lighting and integrated power supply. Optional phase contrast. BScope microscopes are designed for intensive research use in high schools, universities, small laboratories, and veterinary applications. Euromex bScope DIGITAL BS.1157-PLi_B binocular digital microscope • Binocular model • Head with two observation heights • Integrated color CMOS camera 5,1Mp USB.2 • 2592 x 1944 pixels • 7 frames per second (2592 x 1944 pixels) • 27 frames per second (1280 x 960 pixels) • ImageFocus Alpha software CAMERA BScope digital microscopes are equipped with a 5.1 MP 1 / 2.5-inch USB-2.0 CMOS camera, 24-bit color depth, 7 frames per second (2592 x 1944 pixels) or 27 frames per second (1280 x 960 pixels). The dynamic range is 76 db and signal-to-noise ratio 41 db. Supplied with ImageFocus Alpha software, USB-2.0 cable, and 1mm / 100 part calibration pattern SOFTWARE ImageFocus Alpha capture and analysis software allows you to save images in .jpg, .tif, .bmp, or .dicom formats, as well as videos in .avi format. Measurements and annotations can be made on live or captured images. Compatible with Windows 7, 8 and 10, 32 and 64 bit configurations. Mac OS version available. Free updates can be downloaded

Erlab Captair Filtair 606C fume hood. Pre-filter. Carbon filter NOT included. Front air velocity: 0. (more)4 to 0.6 m/s. Analogue air velocity flowmeter. Electrogalvanised steel structure and front and side panels made of chemically resistant acrylic. White light. Wall feedthrough. External dimensions: 600*970*600 mm. User manual not available. Filters must be ordered separately depending on the application. Available filters: AS for organic vapours (+350 €); BE+ for organic vapours and acid vapours (+530 €); F for formaldehyde vapours (+485 €); and, K for ammonia vapours (+570 €). The Erlab Filtair 606 fume hood is a device designed to protect the user from toxic and hazardous fumes during chemical experiments. With its advanced filtration system, this hood ensures efficient gas extraction, maintaining a safe and clean working environment in the laboratory. In addition, its compact and ergonomic design makes it ideal for small spaces, offering comfort and functionality to the user.

EPRUS VLF vertical laminar flow cabinet. G4 pre-filter and H14 absolute HEPA main filter (99.999% ef (more)ficiency). Intuitive four-language keyboard with LCD screen. Fan with air regulation from 10 to 100%. LED lighting. Programmable bactericidal UV lamp. Built-in plug. Easy maintenance, easy installation without tools. Work space dimensions: 975*400*600 mm. User manual. Optional: front panel. Attention: the price shown corresponds to the model without front panel, to find out the price of the model with front panel, use the dropdown below. The EPRUS VLF vertical laminar flow cabinet guarantees a completely sterile working environment. Provides protection to the product in pharmacies and in all types of laboratories. All hoods are equipped with a G4 air intake pre-filter and an H14 HEPA filter offering 99.999% efficiency. They have been designed for years of uninterrupted service and are built with the best materials available. The device can display menus and dialog text in four European languages. EPRUS VLF is extremely cost effective and very easy to install. See assambling instructions HERE

Eppendorf MasterCycler Nexus SX1 thermal cycler with fast silver block. Flexlid Concept capable of a (more)ccommodate all kind of PCR tubes and plates with a sample capacity of 96 × 0.2 mL PCR tubes, strips or 1 PCR plate (96 wells). Heating and cooling technology by Peltier elements. Temperature Range from 4 to 99 °C, with an accuracy of ± 0.2 °C and uniformity of ± 0.3 °C. Heating and cooling rate of max. 3°C/s. No gradient capacity. Heated lid 37 – 110 °C with Output USB, Ethernet, CAN in, CAN out. Dimensions (HWD): 320*410*250 mm; 11,2 kg. User manual. The Eppendorf MasterCycler Nexus SX1 thermal cycler provides scientists with flexibility with a silver block for increased speed that can accomodate several standard tube types from 0.2 mL tubes to 96 well plates, there is no need to buy additional blocks. It also provides robust thermal cycling in a compact footprint with intuitive graphic control.

Eppendorf Thermomixer Comfort with block MTP for microplates. Digital display. Programable. Mixing f (more)requency from 300 to 1.400 rpm. Orbit 0.3 cm. Temperature Range from ambient -13°C to 99°C. Heating rate 5 ºC/min. Cooling rate 3 ºC/min. Accuracy ±0.5 from 20 to 45, ±2 below 20 and above 45°C. Timer from 1 min to 9:59 hours or continuous operation. It shows some signs of heavy use. User manual. The Eppendorf Thermomixer Comfort with MTP block for microplates can mix and temper microplates at the same time. Applications include enzymatic reactions, transformation, DNA, RNA, and protein manipulation, bacterial cultures, immunoprecipitation, and hybridization, among others.

Thermal cycler gradient Eppendorf 5331 Mastercycler Gradient. Block universal for 96 tubes of 0.2 m (more)L or 77 tubes of 0.5 mL. Control of the temperature of the block of 4 to 99°C.  Temperature-control speeds: Heating rate: approx. 3°C/s; cooling rate: approx. 2°C/s, measured on the block.Temperature Accuracy: ± 0.2°C. Storage of 100 programs. RS232 output. Includes manual. The Eppendorf 5331 Gradient MasterCycler is ideal for quantitative PCR applications and offers extremely fast temperature rise, a 1° to 20°C gradient function, short detection times and intuitive programming. The gradient block can hold 0.2 mL (capacity of 96) and 0.5 mL (capacity of 77) tubes or a microtiter plate (capacity of one), without the need to change blocks. Specifications: 230 V; 50-60 Hz; 500W Dimensions AnchxFxAlt cm: 26X41X27 Weight: 12 kg

Locked-Rotor Eppendorf F 45-48-11. A capacity of 48 tubes of 1,5-2 mL. Speed 1,400 rpm. Valid for us (more)e in concentrator Eppendorf Vacufuge Plus.

Racks for Eppendorf CryoCube F440/ F570 ultra low freezer. Stainless steel. Four trays per rack. Rac (more)k dimensions (height*width*depth): 230*145*560 mm. For freezer boxes with a base of up to 136 x 136 mm. Up to 16 boxes per rack. Suitable for U410 ULT freezer that can hold up to 15 racks.

Eppendorf 5333 MasterCycler.  Block universal for 96 tubes of 0.2 mL or 77 tubes of 0.5 mL. Control  (more)of the temperature of the block of 4 to 99°C. Temperature-control speeds: Heating rate: approx. 3°C/s; cooling rate: approx. 2°C/s, measured on the block. Temperature Accuracy: ± 0.2°C. Storage of 100 programs. RS232 output. Includes manual. The EEppendorf 5333 MasterCycler is ideal for quantitative PCR applications and offers extremely fast temperature rise, short detection times and intuitive programming. The gradient block can hold 0.2 mL (capacity of 96) and 0.5 mL (capacity of 77) tubes or a microtiter plate (capacity of one), without the need to change blocks. Specifications: 230 V; 50-60 Hz; 500W Dimensions AnchxFxAlt cm: 26X41X27 Weight: 12 kg

Elmi DTS4 Microplate Shaker Incubator. Capacity for 4 microplates. It can be used for incubation or  (more)shaking only if necessary. Temperature range: ambient + 5 ° C to 60 ° C. Heating above and below the plates. Stirring speed: 100-1300 rpm. Eccentricity: 1.5 mm. Timer: 1 999 minutes or continuous. Standard dimensions of supported microplates: 86 x 128 x 15 mm. Digital display of temperature, stirring speed and timer. The ELMI DTS-4 Digital Thermal Microplate Shaker can accommodate 4 standard microplates simultaneously, offering a significant increase in productivity. A bi-directional heating system ensures uniformity and eliminates condensation. The DTS-4 is easy to use with a control panel that displays the temperature, RPM and timer settings separately. An anti-vibration system coupled with a durable design allows for consistent use and long life.

Reconditioned Elcold chest freezer at -40 ºC. Internal dimensions 650x450x520 / 320 mm (H x D x W).

Turbomolecular vacuum pump Edwards EXT255H 24V. Pumping speed: 220 lit/sec. Inlet flange: ISO100. Ba (more)cking connection: KF25 Minimum size backing pump: 10CMH. Cooling: Water or Air. Edwards EXC 100 or EXC 120 Turbo Pump Controller is needed to operate the pump (excluded).