Semiconductors

HANNA HI97733 Ammonia Photometer, up to 100.0 mg/L New equipment in its original packaging HI97733 c (more)omes with 2 measuring cuvettes, plastic stoppers and caps and batteries. Range: 1.0 to 100.0 mg/L (NH4+) Resolution: 0.1 mg/L Accuracy at 25°C: ±0.5 mg/L ±5% of reading Method: Adaptation of the “ASTM Manual of Water and Environmental Technology, D1426-92” method, Nessler method Light source: LED with 420 nm narrow bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm / 380 g

Base adjustable in height by THERMO SCIENTIFIC electrical control, width 120cm New equipment in its  (more)original packaging For use with the Heraguard ECO 1.2 model (1.2m wide hood) Description: ECO working height from 760 mm to 960 mm with three heights stored in memory Product type: Base adjustable in height by electrical control Total height (metric): 680 to 880 mm Colors: Black and White/Gray Delivered disassembled, to be assembled

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Retsch Modell: 25ml Mahlbecher Edelstahl P/N: 02.462.0119   Kernmerkmale:  - Mit Abdeck (more)ung  - Die ungefähre Zusammensetzung ist 84.5 % Fe, 13 % Cr.  - Die ungefähre Dichte beträgt 7700 kg/m3  - Kann ein Probenvolumen von 4 bis 10 ml enthalten  - Die maximale Partikelgröße im Behälter beträgt 6 mm  - Die empfohlene Kugelladung für den Behälter beträgt ein Stück, 20 mm; oder zwei Stück, 12 mm   Lieferumfang:  - Edelstahl Mahlbecher 25ml - Edelstahl Deckel   Der Mahlbecher befindet sich in einem sehr guten Zustand und wurde 100% auf Funktion geprüft.

Nikon Ne10 Digital Theodelite This item was removed from a university where it was surplus to requir (more)ement. It is in very good cosmetic condition and includes the original carry case shown in the image. We are unable to test the item at our facility.

Amersham Biosciences TE 77 PWR This item was removed from a university lab where it was surplus to r (more)equirements. It is in good cosmetic condition and powers on. The power supply is included. Model: TE 77 PWRSerial No.: 20137585

Pair of Horizon Collators MC-8 MC-8a and MC-8m These were removed from a university lab where they w (more)ere surplus to requirements. Bot units are in reasonably good cosmetic condition and power on, but due to sustained damage, they are not fully operable and therefore, listed as Spares/Repair. The damage sustained is as follows: Part 1:The front intake has completely broken off, with the back tray significantly buckled. Part 2:The rear of the device has sustained severe damage or deformation as a result of mishandling or being dropped. The plugs have since been removed after testing the 32AMP.

Wild Heerbrugg Tachymat TC1000 Digital Theodolite This item was removed from a university where it w (more)as surplus to requirement. It is in very good cosmetic condition and includes the original carry case shown in the image. We are unable to test the item at our facility.

This unit came out of an engineering university. This unit had been in storage for a while but we we (more)re informed that it did operate correctly the last time it was used. Item is in a good used condition with only minor marks. It is supplied with four additional circuit boards. Details:IMS open/custom interface board, 110-0337-003 REV A.IMS LBV DIB board, 120-0577-000 REV A.Force Autocal, US2/97 03080, MSTS1 FT.Charles Water CP304 zip-stat, A11117DD. The PSU unit has a castor missing. Item has not been powered on or tested in any way. Integrated Measurement Systems Test Station. Model: MSTS1 Blazer.Serial No: 001036.Circuit board fitted: IMS mixed signal quad demo board, 100-0478-000. Supplied with:ONEAC Power supply.Model: CSD31150SPL.Serial No: 9723-3726.

This Struers LaboPol-1 Polishing Machine was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order. It is in reasonable cosmetic condition but is well used.

Plasmaquest Magnetron Sputter Coating System This was removed from a university lab where it was sur (more)plus to requirements. The system has not been tested and we were advised by the lab that it was in unknown working condition and that parts may have been removed. Included are; 1 x Plasmaquest ECR Power Supply.1 x Plasmaquest AX2115 1500W Microwave Power Generator.1 x VAT Adaptive Pressure Controller PM4.1 x Model ACG- 5DC.1 x Astex Model No. LS.1 x Astex Model No. SXRH.1 x Universal Flow Rate Indicator Model No. WVS5GM-2-A1ND-PM-1D.1 x Warner Electric Linear Actuator Control. We anticipate a level or refurbishment will be needed to get this system back into working order, so it is sold for spares/repairs.

Nanometrics Nanospec/AFT Microarea Gauge 010-0180 Lab This system was removed from a university engi (more)neering department as surplus to requirements. This system powers on and is in a reasonably good cosmetic condition, unable to test it further at our facility. System includes: Nanometrics CTS-102 Film Thickness Computer/power supplyM/N: CTS 102-7200-0536-01S/N: 1282-2-00549 1x Nanometrics PrinterM/N: 6420-19107S/N: 53892536 1x Olympus BH Base 1x Olympus BHM Stage 2x American Optical 10xWF Eyepiece 1x Olympus 5 Piece Nose Piece with 3 Objective Lenses: - 1x Olympus M10 0.25P/N: 412650 1x Olympus MPlan 100 0.90P/N: 402546 1x Olympus MPlan 40 0.63P/N: 405434

Taylor Hobson Talyrond 300 Motorized Radial Arm This system was removed from a university where it w (more)as surplus to requirement. It is in reasonably good cosmetic condition. When powered up, the item emitted smoke, therefore we did not conduct further testing. Due to the item being damaged, it is listed as Spares/Repairs.

This DEA Swift Coordinate Measuring Machine was removed from a university where it was surplus to re (more)quirement. This item is in reasonably good cosmetic condition but has not been tested at our facility. The previous client has deemed it faulty, so it is listed as Spares/Repairs. Table dimensions: 90 x 90cm Thickness 10cm

Veeco Dektak 3 Surface Profilmeter This was removed from a university lab where it was surplus to re (more)quirements. It is in good cosmetic condition. It is untested as it needs a direct connection to a PC with software for power, therefore, no tests can be performed. It also includes a Panasonic GP-KR222 Camera, which cannot be powered on without a direct connection to the Dektak 3.

Buehler Delta Abrasimet Abrasive Cutter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and in good working order. The workshop has fitted a plug for testing, it will be removed before the sale and will need one fitting or hard wiring on arrival. Clamp dimensions: 8cm x 4cm.Disc dimensions: 9.5in/23.5cm.Disc expiry date: 05/2019.

Taylor Hobson Form Talysurf -120L Surface Measuring Machine This system was removed from a universit (more)y where it was surplus to requirement. It is in reasonably good cosmetic condition. This item has not been powered on or tested further, therefore it is listed as Spares/Repairs. The lab informed us that it was faulty prior to removal. Includes the following: 1x Taylor Hobson CRT Monitor1x Taylor Hobson HP Desktop PC (Hardive removed)1x Taylor Hobson Motor Controller Driver1x Form Talysurf Series Power Supply1x Form Talysurf Series Printout unit1x Taylor Hobson Pneumo Multitasking Motor Controller.4x Booklets/User Guides1x Dallas Semiconductor Dongle Key

1x Dyno Mill Grinder KDL A1x Tricool chiller MINAC 005LTS These items were removed from a university (more) lab where they were surplus to requirements. Both items are in good cosmetic condition and power on, we are unable to test them further at our facility. Information from the client states both units are in working order.

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80. The system was rem (more)oved from a University Lab as surplus to requirements. This system powers up and is in good cosmetic condition, we are unable to test it further at our facility. Mackey Bowley Diffusion Bonder.Serial No. S9638/91Chamber Dimensions: L 58cm x W 38cm x H 38cm.Bed Dimensions: L 80cm x W50cm.Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.Edwards Speedivalve.Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.Eurotherm Controller Type 815 & 818 Installation Manual. Stenhoj Hydraulik 60 Ton.Type: 500414.Serial No. 63153.Model Year: 1991. Cheltenham Induction Heating Ltd.Type: TRI 12.Serial No. TRI2017. Instron Control Panel.Model: 1342.Serial No. H2003.Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.Display One Single Channel Vacuum Display Manual. Edwards High Vacuum Pump.Model: E2M 80.Serial No. 995.Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

International Metrology Systems MS Impact Coordinate Measuring Machine This was removed from a  (more)university lab where it was surplus to requirements. We were unable to test it at our facility but the lab confirmed that it was working prior to removal. It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.

Thermo Vacuum Generators High Vacuum Deposition Sputtering System Lab This system was removed from a (more) university lab where it was surplus to requirement. The previous client has stated that it was in full working order when last used, reaching 10<sup style="color: rgb(51, 60, 68); background-color: rgb(255, 255, 255);">-9</sup> mbar vacuum.It is in good cosmetic condition with all units included in good working order. The system comprises the following components: - Thermo Vacuum Generators main reaction chamber Serial No. CH0412005- 2 x Softshut gate units Part No. V10EA100 Serial Nos. SS0412002 SS0412003- Leybold Turbovac Pump Serial No. 30000045767 - Pfeiffer Vacuum compact cold cathode gauge Type IKR261 BOC Edwards EXT75DX turbomolecular high vacuum pumpSerial No. 046074705- 3 x Luftkuelung pump cooling fans - 3 x Vulcatherm V1 1000W heaters - 2 x Elstein FSR 1000W heaters - RHC Vacuum Generators ZRHC substrate heater controller Serial No. RC0407002- Turbotronik NT20 and NT10 analysis chamber and load lock control unit Serial No. 30000050971- Thermo Electron AML pressure gauge controller Serial No. 0006- Thermo Electron 8558 argon etch gun controller Serial No. G117- Hiden Analytical ion gun turbo interface - Pfeiffer ion gas gun gauge - Power breaker circuit box - Leybold vacuum pump Type D16B serial No. 30000044357 - Edwards vacuum pump E2M1 serial No. 046078290 - Leybold vacuum pump type S1.5 serial No. 20900831099 Additional parts: - 2 x 16 amp cartridge fuses - 14 x 2 amp cartridge fuses - 1 x filament for ion gauge DC7033AA - 2 x air 1/4" tee pieces - 1 x pfeiffer seal for ion gun BN846241-T - 4 x resistor filaments - 1 x Kurt J. Lesker 500g net tin of molecular sieve 1/8" pellets Type 13x Operating and instruction manuals: - Thermo EX03 Ion Gun System - Thermo High Pressure Gas Cell - Arun Microelectronics Pressure Gauge Controller Interface - Pfeiffer Vacuum TPG261 - Varian MidiVac Controller 929-x - Varian Sublimation Controller 929-x - Leybold Turbovac - Leybold turbotronik NT20 - NT10 - Eurotherm 2132 and 2166 PID Temperature Controllers

IKA M20 universal mill. Shear / impact operating principle. Speed max. 20000 rpm. Circumferential sp (more)eed max. 72 m / s. Usable volume max. 250 ml. Product strength max. 5 Mohs. Max. product grain size 7 mm. Connection time 7 min. Disconnection time 10 min. The compartment where it is ground can be cooled with water or dry ice. User manual. IKA M20 universal mill. Charge mill for grinding hard or brittle substances dry and with little losses. The double-walled grinding chamber can be cooled via two hose connectors. The grinding chamber can be removed for easy cleaning. M21 mixer included.

Crosslinker Hönle UV Technology LED. Wavelength of 365 nm. Composed of 3 modules: LED Spot 100 LED  (more)Cube 100 and LED driver Powerdrive 40. Includes software and instruction manuals. Specifications: LED Spot 100: • Extremely long LED service life • Intelligent power control • Controller for one, two or three LED Spot 100 available • 100 mm x 100 mm irradiation area LED Cube 100: • Extremely long LED service life • Available in different wavelengths • Power control between 2 - 100 % • Intelligent door-LEDconnection • Homogenous irradiation • Suitable for temperature sensitive materials • Do not warm-up phase • No stand-by time • Lamp units with different wavelengths easily exchangeable

Multiparameter photometer Hanna C99 with COD. It operates in three ranges: 0-150 mg / mL; 0-1500 mg  (more)/ mL and 0-15000 mg / mL. Specific ion analyzer programmed to analyze up to 39 parameters including COD. It has 4 tungsten lamps with narrow band interference filter 420/525/575/610 nm. Power supply with 2 9V batteries or 12V adapter (not supplied). Auto power off after 10 minutes of inactivity. RS232 port. User manual.

B Braun Mikro Dismembrator U grinder. Vibration amplitude 16 mm (constant), with a vibration frequen (more)cy of 2,000/50 min Timed operation from 00:01 to 98:59 and continuous. Fine grinding, homogenization and efficient mixing of small sample volumes and reproduction of a sample. Depending on the characteristics of the material, the final fineness of the sample can be approximately 1 µm. Digital screen. Sheet steel cover with acid-resistant lacquer. Dimensions 297x259x205mm.. Weight 19 kg. User manual. Discover the B Braun Biotech Mikro Dismembrator U grinder at Galileo Equipment, the perfect ally for sample disaggregation in the laboratory. This high-precision device guarantees consistent results in the preparation of biological samples, thanks to its advanced technology and robust design. Ideal for research and analysis laboratories, the Mikro Dismembrator U offers superior performance in the treatment of tissues and cells. Acquire quality and efficiency with new and reconditioned equipment at www.galileoequipos.com.