Retsch Grinding Balls Zirconium Oxide Zirkoniumoxid 32.368.0004 500g 0,5kg

B Braun Mikro Dismembrator U grinder. Vibration amplitude 16 mm (constant), with a vibration frequen (more)cy of 2,000/50 min Timed operation from 00:01 to 98:59 and continuous. Fine grinding, homogenization and efficient mixing of small sample volumes and reproduction of a sample. Depending on the characteristics of the material, the final fineness of the sample can be approximately 1 µm. Digital screen. Sheet steel cover with acid-resistant lacquer. Dimensions 297x259x205mm.. Weight 19 kg. User manual. Discover the B Braun Biotech Mikro Dismembrator U grinder at Galileo Equipment, the perfect ally for sample disaggregation in the laboratory. This high-precision device guarantees consistent results in the preparation of biological samples, thanks to its advanced technology and robust design. Ideal for research and analysis laboratories, the Mikro Dismembrator U offers superior performance in the treatment of tissues and cells. Acquire quality and efficiency with new and reconditioned equipment at www.galileoequipos.com.

Manufacturer: Retsch Model: 25ml grinding bowl stainless steel P/N: 02.462.0119 Key features:  - Wit (more)h cover.  - The approximate composition is 84.5% Fe, 13% Cr.  - The approximate density is 7700 kg/m3.  - Can contain a sample volume of 4 to 10 ml  - The maximum particle size in the container is 6 mm  - The recommended ball charge for the container is one piece, 20 mm; or two pieces, 12 mm   Scope of delivery:   - Stainless steel grinding bowl 25ml - Stainless steel lid The grinding bowl is in very good condition and has been 100% function tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Miltenyi Biotec autoMACS Pro Cell Separator was removed from a university lab where it was surp (more)lus to requirements. The item turns on and is in good condition with only minor signs of use. When the device started up, it ran into an error with code 7033. The error message warned that the clock timer was not set, and we needed to select the "set_time" option from the user settings. We tried to dismiss the warning by pressing the OK button, but the touchscreen did not respond. Unfortunately, this meant we were unable to perform any further testing. Due to this item is sold as Spares/Repairs.

This listing is for a Thermo Scientific Orion Star A211 Bench Top pH Meter. The unit is in full wor (more)king condition and is ready for immediate release. The Orion Star A211 is designed for accurate and convenient pH measurement, making it essential for various laboratory applications. Key Features: Versatile Measurements: Capable of measuring pH, mV, ORP, and temperature, catering to a wide range of analytical needs. Advanced Calibration: Offers up to 5-point pH calibration with automatic recognition for common buffer standards (USA/NIST and DIN), ensuring high accuracy. Data Logging: Can log up to 2000 data point sets with time and date stamps, facilitating easy tracking of measurements for future reference. Data Transfer Capabilities: Easily transfer calibration and data logs via USB or RS232 to a printer or computer, streamlining data management and reporting. User-Friendly Design: Includes an electrode stand for convenient placement and storage of sensors, along with a comprehensive keypad featuring menu-specific function keys for intuitive operation. Multilingual Support: Supports multiple languages (English, Spanish, French, Italian, German, and Chinese), making it accessible for diverse users. Backlit Graphic LCD Display: Displays critical information, including pH/mV/RmV, temperature, electrode status, time, date, sample ID, user ID, and calibration points, ensuring that users have real-time access to vital data. Specifications: pH Range: -2 to 20 mV Range: ±2000.0 mV Temperature Range: -5°C to 105°C Resolution: pH: 0.001, 0.01, 0.1 mV: 0.1 Temperature: 0.1°C Accuracy: pH: ±0.002 mV: ±0.2 mV or ±0.05% of reading (whichever is greater) Calibration Points: 1 to 5 Data Management: Ability to transfer single, range, or all data points to a printer or computer.

Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Co (more)nnection DN 63 ISO-K Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85The T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT85H Turbomolecular Pump with ISO63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

RET control-visc white Speed Range 50 to 1,700 rpm Temperature setting range 0 - 340 °C Setting accu (more)racy speed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life - Automatic switch-off of the heating function if the connected external temperature sensor is not immersed in the medium. Function selectable, timeout time adjustable (Error 5) PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate with white ceramic coating, reaching a temperature of 340 °C, enables rapid heating and very good chemical resiatance. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc white includes: - RET control-visc white - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.