Facilities & equipment

This item has just arrived in our stock. Please enquire for further details.

ILab 650 Clinical Chemistry System Automatic Biochemistry w/ PC & Software This was removed fro (more)m a university lab where it was surplus to requirements. All the elements power up, but we were not able to get the the PC to communicate with the system. This may just be down to human error. The front doors will not stay closed. The unit comes with:- Dell Optiplex PCAcer MonitorMicrosoft Keyboard & MouseEpson PrinterILab 650 SoftwareOperators ManualHosePower Supply

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is made up of the following modules; Carl Zeiss Axioskop El Einsatz Fluorescence MicroscopeModel: AxioskopSerial# : 23 7412 Carl Zeiss Microscope Power Supply VHW 50f-2bModel: VHW 50f-2bSerial#: 39 26 42Lamp hours: 254.24 Carl Zeiss NAG 2, 12V 100W Stab Power SupplyModel: NAG 2 12V 100WSerial#: 39 25 85 Carl Zeiss HBO 50 Lamp housingModel: HBO 50Serial#: 44 72 20 Carl Zeiss 12V 100W Halogen HAL LamphouseModel: 12V 100W Halogen HALSerial#: 44 72 18 Pl 10x/20 Eyepiece x 2 Serial#: 44 40 32 The following Objectives: Zeiss Plan-NEOFLUAR2,5x/0,075 ∞/-Serial#: 44 03 10 Zeiss ACHROPLAN40x/0,65 ∞/0,17Serial#: 44 00 50 Olympus SPlan20PL0,46 160/0,17Serial#: 80 63 58 Zeiss ACHROPLAN10x/0,25 Ph1 ∞/-Serial#: 44 00 31 Zeiss ACHROSTIGMAT5x/0,12 ∞/-Serial#: 44 01 20

This Orbit Marine AL-7108-CCU Central Control Unit was removed from a university lab where it was su (more)rplus to requirements. The item powers on and boots up with Orbit Marine tracking system software Version 4.84 10.12.2012 installed. It was tested with an external monitor (not included). The front panel is not a display screen. It is in good cosmetic condition with marks from use.

Lauda ECO RE 630 Water Bath with  ECO Silver Circulator This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

Hounsfield H20K-W Tensometer w/ PSU & Various Parts This item was removed from a university lab  (more)where it was surplus to requirements. It powers up and is in good cosmetic condition. All additional parts and accessories included: Hounsfield Test SpecimenCode Ref: E Hounsfield Test SpecimenCode Ref: L Hounsfield Test SpecimenCode Ref: B Hounsfield Test SpecimenCode Ref: B Hounsfield Test SpecimenCode Ref: A Hounsfield Test SpecimenCode Ref: N/A Tensometer Plastic Test Specimen x 2Code Ref: PL. 4 Torsion SpecimensCode Ref: TR1021 Tensile Test Specimen Polymer RangeCode Ref: PL1 Tensile Test Specimen Polymer RangeCode Ref: PL6 Tensile Test Specimen Polymer RangeCode Ref: PL5 Tensile Test Specimen Polymer RangeCode Ref: PL2 Tensile Test Specimen Polymer RangeCode Ref: PL10 Tensile Test SpecimenCode Ref: PL12 Tensile Test Specimen Polymer RangeCode Ref: PL8 Monsanto Tensometer Guage Monsanto Quick-Grip Chucks Chucks for test pieces

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. It is supplied with a trolley

Thermo Scientific Focus GC Gas Chromatograph This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working prior to removal. It is in good cosmetic condition with marks from use.

Packard Biochip Technologies ScanArray Lite Micro Array This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has not been tested further. The lab confirmed it was working prior to removal. It is in great cosmetic condition with only minor marks. The power lead is included.

Labcaire Model SC12R Recirculating Class II Safety Cabinet This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and is in good working order. No UV light is fitted. It is in good cosmetic condition with minor marks. It is supplied with a stand.

This Packard 500TR Series Flow Scintillation Analyser was removed from a university lab where it was (more) surplus to requirements. The unit Powers on and is currently running 515TR BIOS version 3.11. We were unable to test it further. It is in good cosmetic condition with only minor marks from use. Included with it are; 1x 500TR reference manual1x Floppy master disc FLO-ONE for windows Ver 3.651x External control cable1x 24bit external control cable1x FSA Pump retro fit kit1x FSA 500TR Narrowbore pump Cal Instructions2x Serial cables1x Misc control cable1x Flow cell LQTR 500 ul1x Flow cell NBLQ 99 ul1x Bag part of flow splitter 77000211x Bag of Homogenous option kit 7601621

This Agilent 11974U Preselected Millimeter Mixer was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition but has not been tested. Accessories 1 x BNC cableThe unit is in good cosmetic condition. 1 x Adjustable StandThe unit is in good cosmetic condition, there are some light tape marks from general use.The stand can be moved 360º and adjusted up and down with a lock leaver. The lock lever is working.

Coherent Sapphire 488-200 CDRH Laser with CDRH HP Controller This was removed from a university lab  (more)where it was surplus to requirements. Both units power up and the laser beam is working. It was tested with a cable from another unit. It is not included. It is in good cosmetic condition with only minor marks from use. Controller:-Model - Sapphire CDRH HPPart no. 1142958 REV AB Laser head:-Model - Sapphire 488-200 CDRH

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A full report is available on request. It is in good cosmetic condition with minor marks. The trolley it sits on is not included.

This Bellco Biotechnology Cell Production Roller Apparatus was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and runs up to 4000rpm. It is in good working order, and has had a brand new dial fitted. It is in good cosmetic condition with minor marks from use. 9 x Roller levels/shelves The motor was replaced on 13/12/19

Coherent Sapphire Laser 488-200 CDRH with CDRH HP Controller This was removed from a university lab (more) where it was surplus to requirements. Both units power on with the laser beam working. It was tested with a spare cable from another laser which is not included. It is in good cosmetic condition with some minor marks from use. Controller:-Model - Sapphire CDRH HPPart no. 1100969 Rev. AE Laser head:-Model - Sapphire 488-200 CDRH

This Thermo Scientific VersaCool Refrigerated Circulating Water Bath was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. It was tested with a digital thermometer (not included). Heating:-Tested with water, the temperature was set to 37˚c, the temperature quickly went up to 38˚c while the thermometer read 37˚c. It was then tested up to the maximum temperature (for water) of 90˚c which it reached after around 10 minutes, thermometer also read 90˚c. It can go higher but we didn't want it to boil. It is rated for 150˚C. Cooling:-Tested with Antifreeze, the temperature was set to -20˚c, it dropped quite quickly to -8˚c but seemed to stop cooling from there, only dropping a further 0.3˚c over the next few hours. The thermometer read -9.6˚c. This is likely due to the concentration of antifreeze used.

TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories This was removed from a univers (more)ity lab where it was surplus to requirements. The system consists of; 1 x Echo HiVol Hi Volume SamplerModel, Echo Hi Vol110VThe unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. The key is included. 1 x Delta Wireless SamplerElectronic Flow Sampler w/ Battery packModel Delta110VThe unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included). 1 x Delta Battery packThe unit is in good cosmetic condition. It was not tested. 2 x Flight Casea 3x Marigold gloves (size 9)1x Spanner (size 10)2x fuses T6.3AL 250V4X keys1x Widget H0451x TCR Fine PM Air Inlet PM 2.5 200l/min1x Metal Filter attachment2x Glass chambers1x Metal Dome3x Sanitising spray2x TCR TECORA plastic sample trays (3cm diameter)6x Sample dishes with lids (14cm diameter)4x Glass condensers 1x opened 3x factory sealed1x Delta quick guide2x Boxes of Microfibre Discs (1x opened 102mm Dia) quantity unknown(1x sealed 100 Dia) quantity 1001x Flurescein Green Concentrate (bottle partially full, sealed inside a bag it has leaked at some point.1x Air pollution monitoring equipment (Metal chamber with hose)1 x manual1 x TCR Tecora TCR Downloader for Echo Series, Delta & Bravo Plus. There is also a software disk included with this but it is entirely in Italian.

53,760 x Hamilton 1000uL CO-RE Tips, with filter These are sold on behalf of a client. The lot  (more)is brand new and unused. Quantity - Pallet of 14 Boxes of 3840 Tips (8x 480 Tips)Make/Brand - HamiltonModel Number - 235905Product Number - 235905Exp Date - N/ASKU - TIP-1000F-HAM The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This Kendro Heraeus Multifuge 3 S-R Benchtop Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good working order. (Digital thermometer not included). It is in good cosmetic condition but has some marks from age and use. Rotor - Heraeus 6445Max 4600rpm4 x Sorvalll Heraeus Buckets (75006441)4 x Green Adaptors (6496) Holds 5 x 50ml each4 x Sorvall Heraeus Bucket lids (75006421)

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

Motic AE21 Series Trinocular Inverted Microscope with 4x Objectives This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in very good, used cosmetic condition. The microscope has been tested with one of our slides and is working well and is clear. On the microscope are the following modules; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 4 x Objectives: 1x Motic E Plan LWD PH 40x/0.60 ∞/1.1 WD 2.11x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1616Manufactured 30.06.16Output 2051 KW/hr 7.0 MBtu/hr Dungs gas train valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter Caldaia A Condensazione control box with probes and a programmable thermostat to control the boiler at lower temperatures. With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21549, 53299 TEC 5.5KW 415 volt fan motor Type 5.523TECAB35-IE3 T3A 13251-22.5" gas inlet pipe

Nikon SMZ1000 Microscope This was removed from a university lab where it was surplus to requirements (more). The unit is in working order, but has no base. It is in good cosmetic condition with minor marks. 1 x Nikon SMZ1000 MicroscopeParts:-2 Eyepieces - C-W10xB/22Plan Apo 1x WD 70Model - C-FMC (1013443)LV-TVCamera W159P (00529)TV Lens C-0.38x DN

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it  (more)was surplus to requirements. The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer. It is in reasonable cosmetic condition but has some dents.

ITEM-35764

HOWE Refrigerated Solvent Trap   This was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in working order. It is in reasonable cosmetic condition with minor marks from use.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. (Digital thermometer used for testing and is not included). It is in good cosmetic condition with minor marks.

This Ciphergen ProteinChip System Series 4000 was removed from a university lab where it was surplus (more) to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility. Accessories included: The Unit comes with a lot of new ProteinChip Arrays however they are Out Of Date from 2006-2008 CM10 ProteinChip Array 12 Pack (27-09-07) - 12 Boxes and 1 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0075 Q10 ProteinChip Array 12 Pack (08-09-07) - 12 Boxes + 1 Bio Rad 12 PackCat No. - C573-0080 IMAC30 ProteinChip Array 12 Pack (01-12-06) - 19 Boxes and 6 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0078 NP20 ProteinChip Array 12 Pack (06-09-07) - 4 BoxesCat No. - C573-0043 H50 ProteinChip Array 12 Pack (27-09-07) - 2 Boxes and 3 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0065 1 X Ciphergen Energy Absorbing Molecules (EAM)(31-07-06)Cat No. - C300-0001 1 X Ciphergen 96 Well Reservoir Cassette CompatibleCat No. - C503-0012 4 X Ciphergen Sample Holders  1 X Bio Rad Sample Holders 4 X Blank Sample Holders