Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm Arbor Size: 32mmWheel RPM: 2830 RPM Vice cutting capacity: 80mm - 75mm diameter Safety features: Emergency stop, safety switch, electronic break Coolant connection size: 12.5mm Drain size: 32MM ID 34MM OD Coolant tank size: 23 Litre Power: 3 PHASE - No neutral Dimensions: : 800 x 550 x 450 mm  Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

Jun-Air Model 6/6-4 Quiet Running Compressor Lab This item was removed from a university where it w (more)as surplus to requirement. It is in good cosmetic condition and powers on. We are unable to test it further at our facility.

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v These items were remo (more)ved from a university where they were surplus to requirement. Both items are in good cosmetic condition. The smaller 1.84 kVA transformer was tested and found to be operational with a 115-volt power tool on both outlets.No testing was carried out on the larger transformer due to the higher voltage and internal hard-wiring required on the output. Further details regarding each Transformer: TEC 3.5kva three phase transformerSerial No. APR133Primary Volts 440 Secondary Volts 200Input plug red Walther type 210 16 ampsIsolation switchSupplies a very stable supply, designed for stepper motors, CNC machines, and servo equipmentSits on four castors for easy movementDimensions L x W x H 48 x 46 x 41cmsWeight 75kg TEC 1.84kva single phase transformerSerial No. APR135Primary Volts 240 Secondary Volts 115Input plug blue 16amp 3-pin plug 200-250 voltsDual output sockets Mennekes yellow 16amp 3-pin type 1362RS 100-130 voltsDimensions L x W x H 34 x 21 x 29cmsWeight 30.1kg

Job Lot of WintWire Welding Wire 38 x Boxes Box info:-Order no. HPWAAM - S3Cast no. 017011Weight - 8 (more).4kgTensile - 945 N/mm2Size - 2.50 x 3.50 FREQuality - 1.4034 All looks new and unused though a box has been opened for photos.

Pair of Horizon Collators MC-8 MC-8a and MC-8m These were removed from a university lab where they w (more)ere surplus to requirements. Bot units are in reasonably good cosmetic condition and power on, but due to sustained damage, they are not fully operable and therefore, listed as Spares/Repair. The damage sustained is as follows: Part 1:The front intake has completely broken off, with the back tray significantly buckled. Part 2:The rear of the device has sustained severe damage or deformation as a result of mishandling or being dropped. The plugs have since been removed after testing the 32AMP.

Electric motor, transmissions LAFERT LM 71 C4 Type LM/71C4 (LM71C4) Motor 0,24Kw 230V 0,81 / 1300 (more) min-1

Thermo Invitrogen Attune NxT Auto Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in full working order prior to removal. This item has been refurbished by the manufacturer in 2021. Includes the power supply cable.

Benchmark H1000-MR-CMB MAGic Clamp COMBO, for 125ml, 250ml, 500ml flasks Benchmark Scientific MAGic  (more)Clamp COMBO, for 125ml, 250ml, 500ml flasksClick Here to View Product Video INCLUDED: The Benchmark BactiZapper Infrared MicroSterilizer includes: - 1 Year Manufacturer's Warranty

Heidolph 036300510 Overhead Stirrer Visco Jet Impeller inoJET, 120mm (POM) Particularly in the case  (more)of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300 -21,200 ml. This VISCO JET® 120 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 449 L (15.8 cu. ft.) Features - Setting temperature range from -12°C to +60°C - 449 L capacity for various laboratory applications - Equipped with inner glass door for visibility without compromising insulation - Precision temperature control with 2 Pt100 sensors, accuracy to 0.1°C - ControlCOCKPIT with TwinDISPLAY for easy programming and monitoring - Air jacket heating system ensures gentle and uniform all-around heating - Integrated AutoSAFETY with over- and undertemperature protection - Energy-efficient CFC-free cooling system with automatic defrosting The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V is designed to deliver precise and reliable temperature control, with a setting range from -12°C to +60°C, making it ideal for sensitive applications that require exact environmental conditions. This 449 L capacity incubator features an inner glass door, allowing for clear visibility while maintaining insulation. TwinDISPLAY technology on the ControlCOCKPIT provides adaptive digital PID-microprocessor control with high-definition TFT-color displays, enabling seamless adjustments of temperature, fan speed, and program settings. With advanced safety features such as AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and dual Pt100 temperature sensors for accuracy to 0.1°C, the ICP450 offers optimal reliability. Its energy-efficient CFC-free cooling system includes an air jacket heating concept, ensuring gentle and uniform heating throughout the chamber. The incubator is equipped with AtmoCONTROL software for easy programming and data management, making it an exceptional choice for labs requiring consistent and versatile temperature management. INCLUDED: The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

CABINET CS 60 BASIC - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P (more)01, thickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter