Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1561Manufactured 24.02.17Output 2051 KW/hr 7.0 MBtu/hrDungs Control System With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21267, 52981 WEG W22 7.5hp 415 volt fan motor

Jun-Air Model 6/6-4 Quiet Running Compressor Lab This item was removed from a university where it w (more)as surplus to requirement. It is in good cosmetic condition and powers on. We are unable to test it further at our facility.

Integrated BMS Jet Nozzle Test Facility -CP3 Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable. Therefore, it is listed as Spares/Repair. Includes operation keys. Door key not included but can be opened with a standard control cabinet key.

Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis This was removed from a un (more)iversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v These items were remo (more)ved from a university where they were surplus to requirement. Both items are in good cosmetic condition. The smaller 1.84 kVA transformer was tested and found to be operational with a 115-volt power tool on both outlets.No testing was carried out on the larger transformer due to the higher voltage and internal hard-wiring required on the output. Further details regarding each Transformer: TEC 3.5kva three phase transformerSerial No. APR133Primary Volts 440 Secondary Volts 200Input plug red Walther type 210 16 ampsIsolation switchSupplies a very stable supply, designed for stepper motors, CNC machines, and servo equipmentSits on four castors for easy movementDimensions L x W x H 48 x 46 x 41cmsWeight 75kg TEC 1.84kva single phase transformerSerial No. APR135Primary Volts 240 Secondary Volts 115Input plug blue 16amp 3-pin plug 200-250 voltsDual output sockets Mennekes yellow 16amp 3-pin type 1362RS 100-130 voltsDimensions L x W x H 34 x 21 x 29cmsWeight 30.1kg

Job Lot of WintWire Welding Wire 38 x Boxes Box info:-Order no. HPWAAM - S3Cast no. 017011Weight - 8 (more).4kgTensile - 945 N/mm2Size - 2.50 x 3.50 FREQuality - 1.4034 All looks new and unused though a box has been opened for photos.

Edwards nXDS20iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS20iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS20iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS20iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement28.0 m3h-1 / 16.5 ft3min-1Peak pumping speed22.0 m3h-1 / 13.0 ft3min-1Ultimate vacuum (total pressure)0.030 mbar / 0.022 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed10Maximum continuous inlet pressure50 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.6 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 2 kg), wooden box Number of (more) pieces in the set: 27

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW