Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V

BINDER BED-53 incubator / oven with natural convection 100°C Model: BED53 / BD 53 Capacity: 53 liter (more)s Temperature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 40 x 40 x 33 cm Overall dimensions: 63.5 x 64.5 x 61.5 cm Weight: 41 kg Tested at 37°C (temperature recorded: 35.5°C)

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed ​​Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

Cobas EIA incubator thermo shaker. Two selectable temperatures: 37º and 45º. Front and rear block sh (more)aking motion, permanent / interval. Four blocks of 25 spaces for 1.5 - 2 mL tubes.

Heidolph Incubator 1000 Flat Hood With a height of 163 mm, the flat incubation hood is perfectly sui (more)ted for multi-well plates, culture flasks, and Erlenmeyer flasks with a volume up to 100 ml. Suitable for the 1000-series models of the platform shakers Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010, and Promax 1020.INCLUDED: The Heidolph Incubator 1000 Flat Hood includes: - Three Year Manufacturer's Warranty

Benchmark SureTemp Dual Convection 40L Incubator The new SureTemp Incubator series provides the high (more)est level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 40L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Chemical resistant vacuum pump consisting of N 820 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 20 l/min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 1,2 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Application Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Varian CC2C Module Model-Sentorr This item was removed from a university lab where it was surplus to (more) requirements. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Specifications:- Model: Sentorr - Serial No.: LID30427

EPRUS VLF vertical laminar flow cabinet. G4 pre-filter and H14 absolute HEPA main filter (99.999% ef (more)ficiency). Intuitive four-language keyboard with LCD screen. Fan with air regulation from 10 to 100%. LED lighting. Programmable bactericidal UV lamp. Built-in plug. Easy maintenance, easy installation without tools. Work space dimensions: 975*400*600 mm. User manual. Optional: front panel. Attention: the price shown corresponds to the model without front panel, to find out the price of the model with front panel, use the dropdown below. The EPRUS VLF vertical laminar flow cabinet guarantees a completely sterile working environment. Provides protection to the product in pharmacies and in all types of laboratories. All hoods are equipped with a G4 air intake pre-filter and an H14 HEPA filter offering 99.999% efficiency. They have been designed for years of uninterrupted service and are built with the best materials available. The device can display menus and dialog text in four European languages. EPRUS VLF is extremely cost effective and very easy to install. See assambling instructions HERE

PM Balances by RADWAG Laboratory Precision Under Industrial Conditions. New technology The ability t (more)o weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Ohaus ISTHBLCTS Heating/Cooling Thermal Shaker The Ohaus ISTHBLCTS Thermal Shakers is designed for a (more)pplications that require consistent and precise results. With heating, cooling and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 1° C between 20° C and 45° C; ± 2° C above 45° C. The ISTHBLCTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. Cooling models utilize dual temperature sensors to reach temperatures down to 17° C below ambient. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLCTS Heating/Cooling Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty