Heidolph 036300510 Overhead Stirrer Visco Jet Impeller inoJET, 120mm (POM)

Yamato LT-400A Overhead Stirrer, 100-120V Speed Range 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor (more) DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400A Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato LR-500B Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 100 to 1000 rpm Max T (more)orque 0.98N•m (10kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 100~1000 rpm for medium viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load. INCLUDED: The Yamato LR-500B Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Microstar 7.5 Digital Overhead Stirrer Stirring quantity max. (H2O) 5 L Speed Range 0/50 - 200 (more)0 rpm Viscosity max. 4000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: INCLUDED: The IKA Microstar 7.5 Digital Overhead Stirrer includes: - MICROSTAR 7.5 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Microstar 7.5 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)5 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 2000 rpmViscosity max.4000 mPasOutput max. at stirring shaft15.7 WPermissible ON time100 %Torque max. at stirring shaft7.5 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.075 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)60 x 173 x 126 mmWeight1.18 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.downloads-section { justify-content: center; }.comparison-table tr td:nth-child(7) { background-color: #fffacd; }DownloadsTechnical Specification Download Request a Formal Quote

IKA Eurostar 60 Digital Overhead Stirrer Viscosity Max 50000mPas Speed Range 0/30 - 2000 rpm Devi (more)ation of Speed Measurment Less than 1% Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universally used strong laboratory stirrer for quantities upto 40 l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 - 2000 rpm. Safetycircuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintainedand variations are adjusted automatically. This guarantees a constant speedeven with changes in viscosities of the sample. INCLUDED: The IKA Eurostar 60 Digital Overhead Stirrer includes: - EUROSTAR 60 digital - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 60 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)40 lMotor rating input176 WMotor rating output126 WMotor principleBrushless DCSpeed display7 segment LEDSpeed range0/30 - 2000 rpmViscosity max.50000 mPasOutput max. at stirring shaft126 WPermissible ON time100 %Torque max. at stirring shaft60 Ncm Speed controlstepless Setting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.6 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

RET control-visc Speed Range 50 to 1,700 rpm Temperature Setting Range 0 - 340 °C Setting accuracy s (more)peed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate, reaching a temperature of 340 °C, enables rapid heating. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc includes: - RET control-visc - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - 2 Year Manufacturer's Warranty

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 5800 Series Ultrasonic Cleaner 2.5 Gallon.