Autoclaves BKM-ZB

Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V Internal Capacity 300L Temperature Range A (more)mbient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable forcedl convection 300L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +10~210°C.INCLUDED: The Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato SK-102C Compact Sterilizer 18L, 115V Temperature Setting Range 50°C to 126°C Timer 0 min. to (more) 999 min. Internal Capacity 18L Features - Easy to use - Option for an 18, 24 and 30 liter chamber - Powerful 2000W pipe heater - Easy to read 4 digit LED display - Programmable sterilizing and temperature functions - Timer Setting Range 0 to 999 min - Water level detection sensor - Safety valve - Safety interlocking interactive device The Yamato SK-102C Compact Sterilizer 18L, 115V is an advanced and user-friendly device designed for efficient sterilization. This 18L sterilizer, adaptable for 24 and 30 liter chambers, operates on a 115V system. It features a powerful 2000W pipe heater and a high-quality stainless steel SUS 304 interior, ensuring durability and reliable performance. The sterilizer offers a broad temperature setting range from 50 to 126°C and can handle a maximum operational pressure of 0.142MPa at its highest temperature. The temperature is easily controlled through a PID control by microprocessor and set using digital ▲▼ keys, with a clear 4-digit green LED display for monitoring. The sterilizer also includes a programmable timer ranging from 0 to 999 minutes. For safety, it is equipped with multiple features, including a water level detection sensor utilizing a liquid expansion method, a safety valve set at 0.165MPa, and a spring full lift safety valve, complemented by an interactive safety interlocking device. The internal dimensions of the sterilizer are ⌀280 x H292 mm, while externally it measures W380×D380×H629 mm, making it a compact yet efficient solution for various sterilization needs. INCLUDED: The Yamato SK-102C Compact Sterilizer 18L, 115V includes: - Rack - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 2840ELCPVGP Lab Line Standing Autoclave Features - Take Advantage of Tuttnauer’s state-of- (more)the-art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316L grade high quality stainless steel chamber and door with electro-polish finish - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316L grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 2840EL is a front loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 2840EL autoclave comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers. This unit features fast cooling (up to 75%) in which water circulation is done through cooling pipes that cools the chamber. Additionally the complete drying feature utilizes steam from the generator in combination with vacuum for complete drying. This model features a printer. INCLUDED: The Tuttnauer 2840ELCPVGP Lab Line Standing Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 20-200ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.60/0.80/1.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Tuttnauer EHS line of autoclaves uses a steam generator for direct injection of steam into the c (more)hamber which is essential for the high speed performance. A silent water ring pump is an inherent part of the fractionated pre-vacuum and post-vacuum in the drying stage. A water connection is required for operation of the unit.

This listing is for a Consort EV261 Power SupplyAll Consort Maxi Series (EV200) power supplies have  (more)four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run. Programming–up to 9 different programs, each with 9 steps, can be stored in the nonvolatile memory for future recall. Timer–can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed. Automatic cross-over–each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant. Automatic recovery after mains failure–after restoration of power, the instrument will automatically continue the run for the remaining time. Data Transfer–optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory. Safety precautions –the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Safety cabinet for lithium batteries CSF711/L LITHIUMSAFE CHEMISAFE, with accessories: 12-position electrical multiple socket; fire extinguisher with smoke detector.

Hersteller: Binder Modell: KBF 720 E5.2 Technische Daten: Temp MAX: 70 °C Temp MIN: 0 °C Volumen: 70 (more)0 l steril: Nein Breite: 890 mm Breite/innen: 576 mm Höhe: 1925 mm Höhe innen: 1250.0 mm Länge: 1250 mm Tiefe: 1250 mm Tiefe innen: 973 mm Anzahl Fachböden/ Gitter: 2 Bedienung über Touchscreen Gewicht: 309 kg Länge innen: 973 mm Spannung: 230 V Typ Schnittstelle: USB|Ethernet Heizgeräte und Wärmeschränke Eigenschaften: mit Überhitzungsschutz|mit stufenloser Temperaturregelung|mit innenliegender Glastür|mit Zertifizierung|mit Timer|mit Schnittstelle|mit Kühlung|mit Datenlogger Leistung: 3100 W Art der Konvektion: Natürlich Temp.-Genauigkeit: +/- 0.2 °C Typ Inkubator/ Brutschrank: ohne CO2-Zufuhr Feuchtebereich: 10 % r.F. bis 80 % r.F. Material Innen: Edelstahl Seite Türaufhängung: rechts|links Stellvarianten: alleinstehend Typ Temperierschrank: Konstantklimaschrank

Benchmark Block, 96 x 0.2ml or 1 x PCR Plate The Benchmark Block (for 96 x 0.2ml or 1 x PCR plate) f (more)or use with the MultiTherm Heating Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 96 x 0.2ml or 1 x PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty