Boxer Autoclave Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Astell ASB270BT16963 Autoclave Front Loading Floor Standing Autoclave This was removed from a univer (more)sity lab where it was surplus to requirements. The unit does power up, but the lab reported that it had a vacuum fault. It has not been tested at our facility. It requires a 5 Pin 32amp plug. It is in reasonably good cosmetic condition with minor marks. It is sold for spares/repairs.

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

This listing is for a refurbished Laboklav 135MSLV Touch Autoclave Incl. commissioning in UK. (outs (more)ide the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Vacuum incl. pre- and postvacuum, heating during post vacuum Fast re-cooling with double jacket, counter pressure + internal fan Network connection (LAN), USB 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Yamato SM-520 Large Capacity Sterilizer with Dryer 50L, 100-120V Operating Temperature Sterilization (more) 105°C to 135°C Operating Temperature Drying 135°C to 150°C Internal Capacity 50L Features - Interactive keypad input allows committing sterilization settings to memory - 7″ interactive touch screen - Suitable for protein modification at the maximum operating temperature of 135°C - Easy settings and operation modes for a multitude of sterilization process - Increased safety and function list including forced cooling and memory functions - Equipped with multiple safety locking mechanism for the lid - Comes with large capacity (11L) heat resistant stainless steel container - Alarm buzzer sounds when high or low pressure error occurs Large capacity, high performance, fully automatic 50L steam sterilization from start to finish with high pressure steam sterilization and drying steps. Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory 7″ interactive touch screen Suitable for protein modification at the maximum operating temperature of 135°C. Easy settings and operation modes for a multitude of sterilization process. Increased safety and function list including forced cooling and memory functionsEquipped with multiple safety locking mechanism for the lid. Comes with large capacity (11L) heat resistant stainless steel container. Alarm buzzer sounds when high or low pressure error occurs. Sterilizing temp. range 105 to 135°C. Drying temp range 135 to 150°C. INCLUDED: The Yamato SM-520 Large Capacity Sterilizer with Dryer 50L, 100-120V includes: - 2 pcs. stainless steel mesh basket (⌀344 x D200 mm) - Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V Chamber Volume 5 (more)0L Sterilization Temperature Range 105C to 135C Chamber Dimensions 11.8" x 28" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Fully automatic drying cycle for solid loads uses heat and vacuum for faster and more efficient drying. - Lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or when the temperature exceeds 97°C. - Pre-vacuum cycle - vacuum pump removes air from the chamber when sterilizing solids such as glassware and pipette tips, thereby eliminating cold spots, and ensuring faster and more efficient sterilization. - One-touch lever to easily open and close chamber lid. - Liquid cycle for media and agar. - Process display shows the program progress selected and status of the sterilization cycle. - Cycle for wastes and glassware without drying. - Bacteria filter reduces re-contamination. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. The HVP-50 Autoclave (with a 50-L chamber) is a self-contained, portable floor model mounted on casters. It occupies minimum floor space, operates at 120V, and can fit conveniently into many locations in the laboratory. Its many uses include the sterilization and drying of glassware, pipette tips, lab coats, wastes and also liquids such as agar and media. The HVP-50 can accommodate a 10-L fermenter, a 15-L carboy, a 19” x 24” biohazard bag, six 1-L flasks, twenty-one 500-mL bottles, 180 x 20-mm test tubes in two stacked baskets, or 270 x 13-mm tubes in three stacked baskets.INCLUDED: The Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

This listing is for a Biotest Hycon RCS Air Sample Plus Air Sampler.The unit is in full working cond (more)ition and is ready for immidate realese.The Biotest Hycon RCS Plus Air Sampler is a highly reliable microbial air sampling system designed to monitor the microbiological quality of ambient air. It is widely used across multiple industries such as pharmaceuticals, food and beverage, healthcare, and other sectors where air quality is critical. This device operates using the impaction principle, where airborne microorganisms are captured onto an agar strip via centrifugal force for subsequent analysis.Key Features:Impaction Sampling Method: Separates and captures airborne microorganisms onto an agar strip for precise microbiological analysis.Sampling Volumes:7 preset sampling volumes: 10, 20, 50, 100, 200, 500, and 1000 liters.3 user-defined volumes adjustable between 1 to 1999 liters, providing flexibility for various sampling requirements.Intrinsic Safety: Certified to ignition class “ib,” which ensures safe operation in explosion hazard or hazardous areas.GMP and FDA Compliance: The device meets industry-standard Good Manufacturing Practice (GMP) and FDA guidelines for use in regulated environments.Adaptability: Customizable settings to fit user-specific needs and different air sampling conditions.Ergonomic Design: The lightweight and portable design allows for ease of use in routine air quality monitoring tasks.

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 5000 model (measured with ethanol): - a 20°C, 5.00 kW - a 10°C, 3.90 kW - a 0°C, 2.75 kW - a -10°C, 1.70 kW - a -20°C, 1.00 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM Maximum Speed 4,000 RPM Maximum RCF 2,250  (more)x g Maximum Capacity 6 x 50ml Features - Steel body construction with a plastic-sprayed surface for durability and aesthetic appeal - Low noise operation at less than 65 dB(A) ensures a quiet laboratory environment - Features a low temperature rise during use, preserving sample integrity - Equipped with a maintenance-free DC brushless motor for reliable and smooth operation - Microprocessor control with door cover protection enhances safety - Alarm monitoring function for real-time tracking of lock and motor status - User-friendly interface facilitates intuitive setup and operation - Real-time display of centrifugal force and operational parameters - Push-button programming and digital tube display for easy operation and monitoring - Supports various fixed-angle rotors to accommodate different testing needs - Compact dimensions make this centrifuge ideal for benchtop use The MARSHALL Select MS-CE4000 Benchtop Centrifuge is designed for optimal performance and durability, achieving a maximum speed of 4,000 RPM and an RCF of 2,250 x g. Its capacity to handle up to 6 x 50 ml tubes makes it suitable for a range of laboratory applications, from biochemistry to pharmacy. The centrifuge features a robust steel body with a plastic-sprayed surface, combining strength with an aesthetically pleasing appearance. It operates quietly with a noise level below 65 dB(A) and maintains a low temperature rise during operation, ensuring sample integrity. Equipped with a maintenance-free DC brushless motor and microprocessor control, the MS-CE4000 ensures smooth and reliable operation. The unit's safety is enhanced with door cover protection and an alarm monitoring system that keeps track of the lock and motor status. Its user-friendly interface includes push-button programming, a digital tube display for real-time parameter monitoring, and the ability to set and view centrifugal speed and time. The centrifuge is versatile, supporting various fixed-angle rotors to meet different experimental needs. With its compact dimensions (17.7 x 14.6 x 11 inches), this centrifuge is an excellent choice for laboratories seeking a reliable, multi-functional device. INCLUDED: The MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Motic Panthera TEC POL (Trinocular) Features - UC Plan Achromat objectives (strain-free) for FOV 22m (more)m - Transmitted and transmitted/ incident stand options - Transmitted light: LED/HAL light source interchangeable - Integrated focusable/ centerable Bertrand lens - Motic LightTracer: Coded nosepiece & Digital light intensity knob The Panthera TEC POL series fills a last gap in the Panthera family: Polarization microscopes for all material sciences, ready to handle transparent samples like fibers and foils with their inherent birefringence. The Incident light models for opaque materials work out the specific reflectivity (bireflection) of flat surfaces. To extend the application fields, all microscopes carry an intermediate tube with Bertrand lens to analyze the crystal structure and interference figures of gems, precious stones and minerals.INCLUDED: The Motic Panthera TEC POL (Trinocular) includes: - 4X/0.1 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 60X/0.8/S (WD 0.35mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue Filter - Halogen Bulb - Adjustable Key for Nosepiece - Interference Color Chart - Screws for Metal Extension Support - Operator's Guide Motic Panthera TEC POL (Trinocular) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeSensor type-Sensor size-Capture resolution-Live display mode (through Wi-Fi)-Live display mode (through ethernet)-Live display mode (through HDMI)-Inclination25º inclinedTrinocular light splitFixed 50:50Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 4 diopterEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentNosepieceReversed quintuple, coded with single centering holesIntermediate BodyRotatable analyzer 360º, Bertrand lens and slot for compensatorsObjective classificationCCIS® UC Plan Achromatic (strain-free), DINObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)Objective mounting threadW 4/5"x1/36" (RMS standard)StageCircular rotating 360º, lockableStage sizeØ160mmTravel range X&Y1º increments, 0.1º vernier scaleCondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polarizerDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2µmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityHalogen/LED and LED color temperature interchangeabilityIllumination featuresMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorTransformerInternalPower supply110-240V (CE)Other featuresUSB 2.0 for external camera powerDimensions LxWxH410x300x395mmNet weight9.8kgComparison of ModelsSpecificationPanthera TEC POL (Binocular)Panthera TEC POL (Digital)Panthera TEC POL (Trinocular)Optical systemCCISCCISCCISObservation tubeBinocular head, Siedentopf typeBinocular head, Siedentopf type with built-in digital cameraTrinocular head, Siedentopf typeEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)StageCircular rotating 360º, lockableCircular rotating 360º, lockableCircular rotating 360º, lockableStage sizeØ160mmØ160mmØ160mmTravel range X&Y1º increments, 0.1º vernier scale1º increments, 0.1º vernier scale1º increments, 0.1º vernier scaleFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity control.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download

Julabo DYNEO DD-300F Refrigerated Circulator with Digital Output, 115V/60Hz (NRTL Certified) Refrige (more)rant R134a Working Temperature Range -25°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options including RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port.Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-300F Refrigerated Circulator with Digital Output, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty