Astell AMA260T Top-Loading Autoclave Lab

Tuttnauer 3870M Manual Analog AutoclaveFeatures - Designed to autoclave glass, wrapped, and unwrappe (more)d tools - 60 minute cycle timer - Temperature selection from 100°C to 134°C (212°F to 273°F) - Combination pressure and temperature gauge - Double safety locking device prevents door from opening while chamber is pressurized - Valve is conveniently located at the front to allow quick and easy reservoir drainage - The dual safety thermostat and automatic shut-off deliver reliable protection from overheating - The long-life electro polished chamber and door are made to last With the capacity to meet the most demanding offices, the Tuttnauer 3870M Manual Analog Autoclave accommodates longer instruments or many small instruments. The low maintenance manual autoclave is the ideal choice that fits all your needs. The Tuttnauer 3870M Manual Analog Autoclave has a chamber size with a diameter of 15 inches and a depth of 27 inches. INCLUDED: The Tuttnauer 3870M Manual Analog Autoclave includes: - 2 Stainless Steel Trays - Autoclave Stand - Boost Transformer for 208V to 230V - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Benchmark BioClave 28 Research Autoclave, 28 liter, 120V Despite the space-saving exterior dimensio (more)ns of the Bioclaves, the stainless steel chambers are surprisingly large, accommodating a variety of liquids, media, instruments, glassware, plasticware and other common research laboratory items. Available in 8L, 18L and 28L chamber volumes, these benchtop models include a mechanical and electrical safety interlock that prevents the door from being opened until the pressure has reached zero PSI.With a large digital LCD display and fully automatic operation, all segments of the cycle (fill, sterilize, exhaust and dry) commence and run to completion by simply pressing the start button. An optional thermal mini-printer is also available for providing a record of sterilization parameters and a USB drive can be used to record settings and transfer them to a PC.The 8 liter BioClave Mini is preprogrammed to meet basic sterilization needs. Temperature can be selected at either 121°C or 134°C, and the sterilization time is fully adjustable. The economical BioClave Mini is the ideal choice wherever benchtop sterilization is required and space is limited. BioClave 18L and 28L Models offer preset cycle options (standard programs), for use with liquids, wrapped research instruments or unwrapped instruments/plasticware. An additional option “Dry Only” is also available for additional drying time to be added to the end of a cycle. For special applications, requiring variations in cycle parameters, all settings are fully adjustable. The Bioclave 28L features an increased chamber size with a diameter of 32cm. With this larger internal chamber, the BioClave 28 is our only model capable of sterilizing 1 and 2 liters flasks (and bottles). Despite the increased chamber size, the unit is still relatively compact, suitable for benchtop use.INCLUDED: The Benchmark BioClave 28 Research Autoclave, 28 liter, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Tall Micro Bead Sterilizer w/ Glass Beads Benchmark’s Micro Bead Sterilizer is ideal for t (more)he sterilization of small research tools (forceps, scissors, etc.). When the chamber is filled with the included glass beads, high temperatures (up to 300C) can be used to eliminate the presence of bacteria, spores and other microorganisms. Chamber temperature can be viewed on the large LED control panel and conveniently adjusted with the control knob. The outer casing of the unit stays cool to the touch, even when the sterilizer is used all day. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The Micro Bead Sterilizer does not use gas, flame or chemicals and is safe for use in hoods. With adjustable temperature, the application range of the sterilizer can also be exanded into incubations and the decontamination of plastic objects/tools. This product is designed for RESEARCH USE ONLY. Not intended for clinical use. INCLUDED: The Benchmark Tall Micro Bead Sterilizer w/ Glass Beads includes: - Glass Beads, 300g - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Small-Steam-Sterilizer provides sterilization of wrapped or unwrapped surgical and dental instr (more)uments at 134°C as well as sterilization of thermolabile sensitive to heat materials at 121°C. It is designed for use at on-site locations. Permissible operation overpressure: 3 bar Working Pressure: 1,1/2,2 bar Permissible operating temperature: 138°C Working Temperature: 121/134°C Capacity of sterilization chamber: 19,5 L Acoustic power level: <85 dB(A) Dimensions (HxWxD): 440 x 500 x 700 mm Chamber dimensions (⌀xD): 250 x 380 mm Weight: 45 kg

With extra fast and efficient drying cycles, the EA autoclaves significantly increase your productiv (more)ity. This model has the added benefit of a high efficiency air pump which allows closed door active drying. The EA is built for improved sterilization with the ability to dry packs and pouches. Chamber volume: 23 L Tray dimensions (WxHxD): 168 x 20 x 414 mm Dimensions (WxHxD): 508 x 362 x 550 mm Weight: 36 kg

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370 ° C. Low Profile, Attractive Design RC offers an innovative low profile and highly attractive design for greater user comfort. Even the inclination of the front panel has been carefully studied to facilitate its use. - The control panel is IP 42, protected against liquid spills with a drain groove - Choice of mains voltage / frequency model - Tilted control panel for easy access and visibility - Suitable for the AluBlocks ™ accessory system, which maximizes temperature control and saves handling time - Designed for maximum durability and backed by a 3-year warranty

This Adaptif Phototonics Polarization Synthesizer Model. A3300 was removed from a university lab whe (more)re it was surplus to requirements. The unit powers on and is in good cosmetic condition. The power light does not illuminate when switched on but we could hear it running. No PSU was supplied so we used a multi-adapter (not included). The APC input and output ports are in good cosmetic condition. The control button moves freely.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7&quot; colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company&#39;s branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty