Agilent 6890 Series Plus GC (G1530A) Gas Chromatograph Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This was removed form a unuiversity lab where it was surplus to requirements. The unit did not power (more) up in testing. We are advised it has a board fault. It is sold for spares/repairs.

Finnigan MAT GCQ Mass Spectrometer Gas Chromograph GC-MS System This was removed from a university l (more)ab where it was surplus to requirements. The Mass Spectrometer powered on with the cooling fan operating and lights illuminating on the front panel. It is in good cosmetic condition with minor marks from use. Finnigan MAT GCQ Mass SpectrometerSerial No. 200295

This Perkin Elmer GC Gas Chromatograph Clarus 480 was removed from a university lab where it was sur (more)plus to requirements. It is in reasonably good cosmetic condition and powers up. The original ECD detector has been removed, leaving mains cables exposed, therefore, this item is listed as Spares/Repair. Part number- N664948ESerial number- 480S13030901

Agilent Technologies 6850 Network GC System with Atas Programmable Injector This system was removed  (more)from a university lab where it was surplus to requirements. The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning. Specifications: - Agilent Technologies 6850 Network GC System - Serial No.: 6850-CN10750008 - Atas Programmable Injector - Serial No.: 36083

Agilent 7890A GC System This system was removed from a university lab where it was surplus to requir (more)ements. The system is in fair cosmetic condition, with a few marks and scratches. It powers on, but no further testing has been conducted due to the absence of a PC and software. According to the previous owner, there are no known faults, but the system has been out of use for a few years and would likely need recommissioning. Specifications: - Serial No.: CN10809012 - Model: G3440A

Technical specifications:

Memmert UN75plus Natural Convection Oven 74L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - 74L internal volume for versatile sample sizes - Precise temperature control from +5°C above ambient to +300°C for a wide range of applications - Equipped with TwinDISPLAY, featuring two high-definition TFT-color displays for advanced control - 2 Pt100 sensors in a 4-wire circuit for reliable temperature monitoring and control - Natural convection for uniform temperature distribution without forced airflow - Pre-heated fresh air admixture with electronically adjustable air flap for optimal temperature uniformity - Comprehensive safety features, including AutoSAFETY with over- and undertemperature monitoring - Easy-to-clean stainless steel interior reinforced by deep-drawn ribbing for durability and hygiene The Memmert UN75plus Natural Convection Oven 74L, 115V offers exceptional performance for temperature-sensitive applications, with a large 74L internal volume to accommodate a wide range of samples. This advanced laboratory oven features precise temperature control, with a working temperature range of +5°C above ambient up to +300°C. Its highly accurate 2 Pt100 sensors in a 4-wire circuit ensure consistent temperature readings, while the TwinDISPLAY digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive adjustments and real-time feedback. Designed for efficiency, the Memmert UN75plus includes natural convection for even heat distribution, as well as the option to adjust the airflow with an electronically adjustable air flap. The durable, easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing, ensures long-lasting performance and hygiene. Safety features such as the overtemperature monitor, mechanical temperature limiter, and integrated AutoSAFETY system protect against overheating, while the AtmoCONTROL software allows remote monitoring and data logging for precise control and documentation. INCLUDED: TheMemmert UN75plus Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/2 is designed for weighbridges equipped with terminal TMC series. It is installed in a large distance from the terminal (e.g. next to the barriers). Communication through RS485, power supply 9-24V AC from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing with stainless steel mounting kit. There are two mounting kits offered, depending on model. Intended Use: Designed for weighbridges equipped with terminal TMC series. It is installed in a large distance from the terminal (e.g. next to the barriers). Communication through RS485, power supply 9-24V AC from scale terminal.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

IKA VXR Basic Vibrax Shaker Shaking weight max. 2 kg Speed Range 0 - 2200 rpm Shaking stroke Orbit (more)al Features - Suitable for continuous operation - New design and improved drive system - Circular shaking motions - Slow speeds are well maintained - Attachments are interchangeable The IKA VXR Basic Vibrax Shaker is a compact, optoelectronically controlled small shaker offering a broad speed range from 0 to 2200 rpm. Designed for continuous operation, it features circular shaking motions with a 4 mm stroke, maintaining slow speeds effectively. With a new design and improved drive system, the shaker's interchangeable attachments add versatility. Ideal for various laboratory applications, it combines reliability and precision for efficient sample mixing. INCLUDED: The IKA VXR Basic Vibrax Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA VXR Basic Vibrax Shaker Specifications Type of movementorbitalShaking stroke 4 mmPermissible shaking weight (incl. attachment)2 kgMotor rating input 35 WMotor rating output 13.5 WPermissible ON time100 %Speed min (adjustable)100 rpmSpeed range0 - 2200 rpmSpeed displayscaleOperating modecontinuous operationDimensions (W x H x D)157 x 130 x 247 mmWeight6.1 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 W