Agilent 7890A GC Gas Chromatography System Model G3440A Lab

VOGTLIN GCM Red-y Compact Mass Flow Meter Model: Vögtlin GCM-C3EA-BN00 Medium: Air/air Measuring ran (more)ge: 0.2-10 Measuring unit: ln/min Accuracy : ±2.0 % end value (range to 200 ln/min) Temperature: 20 °C Pressure inlet: 2 bar a Connection: G1/4″ Inside thread Body material: Aluminum Seals: FKM Power supply: Battery Calibration protocol: with Ref. Pressure : 1013 [mBar] Ref. Temperature : 0 [°C]

Perkin Elmer TurboMass Gold AutoSystem XL GC-MS System & Accessories Lab This was removed from a (more) university lab where it was surplus to requirements. The system powers up and is in good cosmetic condition, although it has been seen by an engineer who has reported this item is not in working condition, therefore, it is listed as Spares/Repair. The transfer line has been removed. Included are; Perkin Elmer AutoSystem XLModel: AutoSystemXLSerial#: GION2031503 Perkin Elmer TurboMass GoldModel: TurboMass GoldSerial#: 647N2032301 Also included is the following: TurboMassGC Mass SpectrometerSoftware Guide TurboMatrixHeadspace SamplersInstrument Manual TURBOMASS GOLD GC/MSHardware Guide TURBOMASS GOLD GC/MSTutorial TurboMassGC Mass SpectrometerHardware Guide TurboMassGC Mass SpectrometerUser's Tutorial AutoSystem XL GCUser's ManualVolume 2 ATD 400Automated Thermal DesorberUser's Manual TurboMassGC MASS SPECTROMETERUser's Tutorial AutoSystem XL GCUser's Manual Volume 1 Clarus" GC/MSManualsV5.4 TurboMatrixHeadspace SamplersInstrument Manual

Job Lot of Varian GC Systems Gas Chromatograph Spares or Repairs All items are in good cosmetic cond (more)ition with minimal wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. This job lot includes the following: Varian CP-3800SN - 06822 Varian CP-3800SN - 105885 Varian CP-3800SN - 03297 Varian CP-3800SN - 05481 Varian CP-3800SN - 05482 Varian 3900SN - 00283 Varian Chrompack Micro GC CP - 2003PSN - 941039 Varian PN - 03-917569-10SN - 8487

Varian Star 3400 CX gas chromatograph with onboard printer, dual FID detectors and dual split/splitl (more)ess injectors. Note: this unit is sold as is, no warranty applies. This unit turns on but no further tests have been performed.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 15,200 R (more)PM Maximum Capacity 44 x 1.5/2.0ml or 12 x 5ml Warranty 2 Year Manufacturer's Features - Easy-to-turn rotary knob for parameter adjustments - Waterproof keypad provides protection that helps significantly increase the lifespan of the product - One-touch toggling between speed, g-force, and temperature controls - Refrigeration capabilities from 40°C to -20°C - Cools down from 23°C to 4°C in less than 10 minutes - Pre-cool feature quickly lowers temperature of the rotor and chamber before a run - LCD display which projects information in real-time - View and adjust user parameters from the main screen; no need to navigate through sub-screens - Powerful induction motor reaches speeds up to 15,200 RPM in less than 16 seconds - Maximum g-force of 21,953 RCF - 10 acceleration/deceleration settings - 99 memory sets for commonly used speed and time settings - Motorized lid-locking system prevents centrifuge from opening during operation - Rotor imbalance sensing system stops the motor should the rotors become imbalanced, protecting the user from spinning rotors Click Here to View Product Video The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge provides high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With refrigeration capabilities, 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, the FC5515R provides stable liquid separation for life science applications requiring high-speed operation. The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force, as well as control the temperature. A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly used parameters are a few of the FC5515R’s features that propel high-performance. Among the FC5515R’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from by the high-speed spinning rotors. Compatible with seven different rotors, more than any centrifuge in its class, the highly versatile FC5515R can be used for various applications of different volumes. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5515R Frontier Micro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Ministar 20 Digital Overhead Stirrer Stirring quantity max. (H2O) 15 L Speed Range 0/50 - 2000 (more) rpm Viscosity max. 10000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: Click Here to View Product Video INCLUDED: The IKA Ministar 20 Digital Overhead Stirrer includes: - MINISTAR 20 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 20 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)15 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 2000 rpmViscosity max.10000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft 20 NcmSpeed control Turning knobSetting accuracy speed 1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.075 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 147 mmWeight1.56 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WPower input standby0.5 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }